ARPN Journal of Engineering and Applied Sciences

Research Published in Pakistan

Search Pakistan Science Abstracts by publication details and ISSN to explore peer-reviewed journals and conference proceedings published in Pakistan.

Showing articles published in ARPN Journal of Engineering and Applied Sciences. Remove the Journal filter below to search the whole database.
Pakistan Science Abstract

Browse this publication by year

ISSN 1819-6608 · 735 indexed records

2025 articles

  1. High-altitude platforms as an enabling technology for soft deployment of smart cities
  2. Incremental vs batch learning: a comparative analysis of efficiency and energy consumption
  3. Quantum cryptography: advancements and challenges in secure communication
  4. EMI characterization of a synchronous DC-DC converter for automotive fuel pump application using different power switches
  5. Effect of nickel doping on structural and magnetic properties of α-Fe2O3/TiO2 nanocomposites derived from logas natural sand for environmental applications
  6. A pythonic elegance: unraveling iris classification through convolutional neural network
  7. Enhancing water potability prediction: tuned vs default cat boost models
  8. Efficient and accurate detection of tomato leaf diseases using fine-tuned efficientnetV2 in keras
  9. A review of artificial intelligence and image processing approaches to fault detection in photovoltaic systems
  10. 3D modelling of steel corrosion in alkaline chloride solutions: thermodynamic-kinetic analysis of HFEO2-speciation
  11. Impact of inadequate confinement in RC columns of buildings under the updated Indonesian seismic code on structural performance
  12. Introducing geometric degree of freedom in structural stability
  13. Proposed approach for assessing the deformation of large-scale retaining walls implementing terrestrial laser scanner
  14. Grid-connected converters active power flow control under unbalanced conditions by fuzzy technique
  15. A new energy and exergy in PV hybridized with TEG at variation of cooling fluid mass flow rate
  16. Comprehensive machine learning models for effective cardiovascular disease prediction
  17. Optimized mimo controller based high gain DC-DC converter for electric vehicle applications
  18. Design of a harmonic-free hybrid statcom for load balancing purposes
  19. Coconut shell charcoal briquette machine performance test based on AC electric motor Rpm and brinell hardness test
  20. Implementation of voting-based model with whales optimization algorithm for solving path planning of printed circuit board's hole drilling process
  21. The optimum process parameter when cutting of thin plate made of stainless steel 316L using CO2 laser
  22. Manufacturing enzyme detergent from lipase and methyl ester sulfonate (MES) with the addition of saponin extract from moringa leaves (Moringa oleifera)
  23. Plasmonic fractal graphene-based antenna array design and optimization for UWB-THZ applications
  24. Effect of moisture content and loading orientation on the mechanical properties of Adansonia digitata seeds: implications for design of equipment for processing
  25. Performance of compressed earth blocks: effect of borassus aethiopum mart (BAM) fibers on thermo-mechanical properties
  26. Toxicological and biochemical effects of Mentha pulegium L and Cupressus sempervirens L essential oils on the pine processionary caterpillar: in vitro and in vivo assessment.
  27. Research on diversification scenarios based on Cobb- Douglas model for coal mining enterprises
  28. Design optimization of slotted S-shaped microstrip antenna for 5G applications for bandwidth enhancement
  29. Performance evaluation of honeycomb structures using finite element analysis
  30. Integrating  UAV-DERIVED VARI, GNDVI, NDVI, and NDRE for phenological rice growth analysis
  31. Secondary distribution substation real-time fault monitoring and control system: a case study of XY university low voltage substation
  32. Single-response optimization of bioactive compound content and antioxidant activity of Haematococcus pluvialis extract through taguchi orthogonal array
  33. Evaporation behavior of biodiesel fuel droplets under varying blend ratios, surface temperatures, and tip-to-surface distances
  34. Ash composition, sintering behavior, and mineral transformation in water hyacinth pellet combustion: SEM-EDX and XRD analysis
  35. Influence of barium ions on the properties of supramolecular substances cocamide diethanolamine and polyoxomolibdates
  36. Investigation of an array based on siw technology according to the kind of slot for 5G application
  37. Metamaterial-based transmit antenna coupled to a compact receiver for efficient wireless power transfer to biomedical implants
  38. Aerodynamics study on Slat and Flap embedment onto a Flat plate for high altitude platform UAV  application
  39. Agricultural equipment for farming on terrace, narrowing, and hard-to-reach land: a review
  40. Diabetes diagnosis using a multi-layer perceptron model
  41. Enhanced thermal management in batteries with PCM nanocomposites
  42. Credit card fraud detection using gaussian mixture model: a probabilistic approach for enhanced classification
  43. Marl embankments on the moroccan fez-taza railway line: catalyst/trigger instability analysis and solutions
  44. Design of outboard boat engine lifter trolley for the fishing industry based on ergonomics analysis
  45. Performance evaluation of bio-based mortar incorporating fly ash, rice husk ash, and granite slurry for concrete repair
  46. Assessment of gravity filtration techniques for shipborne marine gravity observations over the mediterranean sea
  47. Optimization of machining parameters in hard turning of Aisi 4340 using hybrid Taguchi and grey relational analysis technique
  48. Single-phase grid connected quasi - z- source inverter using anfis controller
  49. Mixed convection eyring-powell fluid flow over a vertical shrinking sheet with magnetic field effect
  50. Design of rooftop PV system training equipment for competency testing
  51. Development of mix design methodology for the masonry mortar with crushed sand and fly ash
  52. Structural behaviour of multi-storied buildings with response spectrum analysis using fluid viscous damper
  53. Toxicity evaluation of the ethanolic extract and solvent fractions of Crescentia cujete LINN
  54. Water balance assessment and storage optimization for agricultural sustainability: a case study of Mahasarakham University Farm, Thailand
  55. Empowering campuses with wind: assessing the viability of wind energy at manado state polytechnic
  56. Liquid-liquid equilibrium modeling using non-random two-liquid (NRTL) method for extraction of phenolic compounds from the bio-oil of rice husk pyrolysis
  57. Design, simulation, and verification of a PLC-based sequence modification for enhancing dome valve reliability in ash handling systems
  58. Microstructural investigation of znte thin films prepared via pulsed laser deposition (PLD) technique
  59. Drilling parameters determination for slim wellbore in the white tiger field
  60. Aerodynamic enhancement of electric vehicles using a 15° straight-wing spoiler: a CFD analysis
  61. Improvement of physical and mechanical characteristics of clay gypsum of khojakul deposit of Karakalpakstan modified with phosphogypsum
  62. Enhanced detection and segmentation of retinal hard exudates in diabetic retinopathy using an FPN with CNN  efficientnet-B0 encoder
  63. Experimental study on partial cement substitution in concrete with pofa and fly ash
  64. Computational dynamics of an improved inclined plate with variable temperature and variable mass diffusion in the existence of thermal convection effects
  65. Evaluating structural stability: measuring small deformations induced by dynamic and environmental loads
  66. Development and performance evaluation of an innovative mechanized sheet punching device
  67. Statistical analysis of glass fibre epoxy composites reinforced with rice waste
  68. Evaluation of physiochemical properties and microstructure of cement paste blended with saponified cooking oil and cetrimonium chloride
  69. The effect of temperature and stirring speed on the physicochemical properties of oil spill dispersant from soybean oil
  70. Performance and emission analysis of CME-based mixed biodiesel blends in a compression-ignition engine
  71. The role of the demand side management and energy storage system in the optimization of the grid stability in Jordan according to a partially public survey
  72. Developing an algorithm for modeling noisy global positioning system (GPS) data for highways
  73. Combining extended kalman filtering and MPC for advanced induction machine drive systems
  74. Thermal kinetics of glucose fermentation by yeast immobilized on sorghum bagasse with variation in particle size for ethanol production
  75. Mechanical, structural, thermal, morphological, and migration properties of polylactic acid (PLA)/ostrich (struthio camelus) eggshell (OES) biocomposites for food packaging application
  76. Effect of alkali treatment on moisture absorption and mechanical properties of mokolwane fiber reinforced polyester composites
  77. Sustainable clay brick manufacturing using a double- layered solar-powered metallic kiln
  78. The b-value determination of the ambarawa earthquake swarm from 22 october, 2021 to 9 november, 2021 using the least squares method
  79. Road vulnarability damage level using visual model: analysis for medium traffic loading in dense area
  80. A robust approach for sleep stage classification using horizontal visibility graphs and a single eeg channel
  81. Maximum and minimum asphalt pavement temperature models to determine asphalt type based on performance graded in tropical climate environments
  82. Study of the causes of cracks that threaten the collapse of housing in rural areas
  83. X-ray diffraction study on the structural properties of poly-l-lactic acid (PLLA), polylactic acid (PLA), and polycaprolactone (PCL)
  84. Mapping soil salinity using spectral remote sensing and GIS in the Habra plain in Northwest Algeria
  85. Optimizing structural performance of concrete-filled steel tubes: the influence of compaction and cross- sectional shape
  86. Enhancement of mechanical and durability properties of M40 concrete using agro-industrial by-products and fibre reinforcement
  87. A comparative analysis of recycled plastic sustainable brick productions materials in
  88. Improvement of properties of black cotton soil by using construction and demolish waste
  89. Experimental evaluation of clayey soil stabilisation using wood ash and lime additives
  90. Smartstay: a fast and secure web-based hotel booking system using html and php
  91. Effect of pid controller on electric vehicle charging by symmetric interleaving of modular converters
  92. Application of response surface methodology for optimization of bleaching methyl orange dye using FE(III)TAML/H2O2
  93. Classification of white flowers using transfer learning in convolutional neural networks
  94. Preparation of nanosized hydroxyapatite powder from snail shells for fabrication of biomedical composite
  95. A statistical analysis of diesel piezo injector fuel injection timing and duration measured with a photosensor
  96. Comparative analysis of storage solutions on biomechanical properties of articular cartilage
  97. Effect of blade layering on vertical axis wind turbine performance under low wind speed conditions
  98. A method for detecting drought utilizing time series of modis surface reflectance imagery
  99. The effect of cement and fly ash mixture variations on clay soil as a subgrade layer of road pavement
  100. Tender simulation using the friedman method in factory buildings project
  101. Design of a secure data transmission system between two computers using columnar transposition and aes encryption over the TCP/IP protocol
  102. Comparative analysis of roofing systems: evaluating cost-effectiveness and material efficiency for optimized construction
  103. Real-time safety monitoring for vehicle accidents in mountainous terrain
  104. Utilization of water henna leaf extract (Impatiens balsamina L.) based on cocamid dea surfactant in making biodetergent
  105. The effect of processed cooking oil (pco) on the characteristics of cement pastes
  106. Structural performance of multi-storied buildings with time history analysis using fluid viscous damper
  107. Optimization of the design of an external gear pump casing and efficiency through structural finite element analysis and using response surface methodology
  108. Experimental investigation of pv module cooling using phase change materials
  109. Geometric-ransac position estimation method for enhanced indoor positioning using multipath signals for single base station systems
  110. Melon classification using convolutional neural network models
  111. A mixture of coffee grounds and fly ash in cementless geopolymer concrete
  112. Manufacturing detergent using cocamide-dea surfactant and Saponin from Binahong (Anredera cordifolia (ten) steenis) leaf extract
  113. Empowering rural communities with vermicomposting: a sustainable approach to waste management and emission reduction in the Ban Koeng Community, Maha Sarakham Province
  114. Experimental investigation on compressive strength, dynamic modulus, and global warming potential (GWP) of concrete using refractory brick waste
  115. Optimized protection coordination for 20  KV networks with Der: a case study in Jampue And Kariango
  116. Evaluating the multi-purpose encryption (MPE) algorithm: efficiency, security, and adaptability for multilingual text encryption in real-time applications
  117. The potential of green mussel shells as a source of hydroxyapatite for biomedical applications: a comparative study with commercial hydroxyapatite
  118. Development and performance evaluation of a chicken defeathering machine, scalder, and killing cone
  119. Design of non-isolated DC-DC converter-based  LED driver for electric vehicles
  120. Deep learning with the Yolo V4 model for drone detection among birds
  121. MPC based hybrid energy storage system FED micro grid using FLC and ANN methods
  122. Conversion of waste to wealth by reusing rinse water in knit dyeing
  123. Overview of flowslide in balaroa during liquefaction of the 2018 palu earthquake
  124. Data hiding in image using discrete wavelet transform based on steganography coding
  125. Effectiveness of a personal pulse agent (PPA) application development for smartphone users
  126. Performance comparison analysis of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) for intelligent management of distributed generation
  127. Effect of corncob powder on the mechanical behavior of glass fiber/epoxy hybrid composites
  128. Design and simulation of coconut shell charcoal briquette dough mixing machine for small and medium enterprises
  129. Energetic characterization of wood-fueled cooking stoves and ovens used in côte d'ivoire
  130. Convolutional neural network-based driver drowsiness detection system
  131. On the nature of KH2PO4 high-temperature phases
  132. Effect of ph on the retention activities of lanthanum, neodymium, and gadolinium oxides on anion and cation exchange resin
  133. The influence of balinese black rock ash on the compressive strength of concrete
  134. Retrofitting reinforced concrete beams against shear failure using carbon fiber-reinforced plastics: addressing the limitations of monolithic beam-slab systems
  135. Design and analysis of 3-NM strained and conventional finfets
  136. Performance analysis of the "BOUDOUR" direct seed drill in comparison with three tillage systems and their impact on lentil cultivation under semi-arid conditions conditions
  137. Emotion recognition using honey badger algorithm and deep neural network methods
  138. Effect of the water/cement ratio on mechanical and physical degradation of concrete in sulfate environment
  139. Methodology for assessing burned area extent from wildfires using sentinel-2 satellite data
  140. Experimental study of cement replacement with tea waste in rigid pavements
  141. Modeling and analysis of design parameters and interactions in 3D-printed components using response surface methodology
  142. Slope reinforcement using gravity and cantilever retaining wall
  143. Development of an automated greenhouse with control system
  144. Alternative study of coastal protection buildings for mitigating rob floods at Sirenja beach
  145. Environmental risk assessment of lignite storage in the mining industry: strategies for hazard mitigation
  146. Deep learning based knee osteoarthritis detection and classification
  147. Design and analysis of multilevel inverter for electric vehicle by using the ANN
  148. Investigation into semiconductor optical amplifier (SOA) high quality four- wave mixing (FWM) wavelength conversion
  149. Experimental investigation on utilization of rice husk ash and fly ash in rigid pavement
  150. Altitude-optimized uav surveillance for mesquite detection using YOLOV8
  151. Detection of selected skin diseases using AI
  152. The design of MPE algorithm in software defined network
  153. Comparative study and prediction of machining vibration during milling of AA6061 alloys under sunflower vegetable oil
  154. A hybrid rbnn-pid control and tracking the global maximum power point of PV solar system under partial shading
  155. Improving reservoir operation efficiency using electric eel foraging optimization and transit search algorithms with standard operating policy: nong han-kumphawapi case study
  156. Effect of soil characteristics and rainfall intensity on slope stability using the finite element method on the tawaeli-toboli road section km 38+881
  157. Impact of modified orthogonal peanut-shaped intervertebral disc implant based on finite element analysis
  158. Flood wave propogation along the euphrates river due to Haditha Dambreak, Iraq
  159. Basic concepts and background of thermoelectric system-a review
  160. Parking model in IPB university campus environment
  161. Design the prototype of integrated asphalt mixing plant (AMP)
  162. The effect of activator ratio and concentration molarity on setting time of geopolymer binder with umeanyar slate stone powder precursor
  163. The investigation of proppant slurry-settling velocity in static conditions by measurement of light intensity difference
  164. Sustainable concrete: investigating the use of brick waste as an aggregate substitute
  165. The evaluation of the long-term drift of low-resistance measures using time series
  166. Optimization of anti reflecting coating for efficiency improvement of solar photovoltaic system using tcad
  167. Eco-friendly concrete innovations: the role of marble powder and rice husk ash in achieving sustainable construction practices
  168. Analysis of the impact of vehicle density on carbon monoxide concentration in the vicinity of the tello diesel power plant in makassar, indonesia
  169. Quantifying innovation in construction: SPSS analysis of project manager perceptions and their effects
  170. Enhancing concrete performance with coconut shell ash: a sustainable approach to cement replacement
  171. Integrating transfer learning in convolutional neural networks for bryophyte classification
  172. Optimal prediction of al-8112 alloy cutting force via machining using anfis-pso and anfis-ga for a sustainable cutting process