No Detail Found!

X-ray diffraction study on the structural properties of poly-l-lactic acid (PLLA), polylactic acid (PLA), and polycaprolactone (PCL)

Author(s)
Muhammad Afrizal Department of Mechanical Engineering, Faculty of Engineering,Universitas Diponegoro, Semarang,Indonesia
Rifky Ismail Department of Mechanical Engineering, Faculty of Engineering,Universitas Negeri Semarang, Semarang,Indonesia
Deni Fajar Fitriyana Department of Mechanical Engineering, Faculty of Engineering,Universitas Diponegoro, Semarang,Indonesia;Department of Mechanical Engineering, Faculty of Engineering,Universitas Negeri Semarang, Semarang,Indonesia
Athanasius Priharyoto Bayuseno Department of Mechanical Engineering, Faculty of Engineering,Universitas Diponegoro, Semarang,Indonesia
Parlaungan Siregar Faculty of Mechanical and Automotive Engineering Technology, Universiti of Malaysia Pahang Al-Sultan Abdullah (UMPSA), Gambang, Pahang, Malaysia; Centre for Automotive Engineering (Automotive Centre), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), Pekan, Pahang, Malaysia
Chandra Liza Research Center for Polymer Technology, National Agency for Research and Innovation,,Indonesia
Abstract
The growing need for biodegradable polymers in medical applications has underlined the significance of knowing their structural properties, notably those of Poly-L-Lactic Acid (PLLA), Polylactic Acid (PLA), and Polycaprolactone (PCL). These polymers exhibit significant potential for biomaterial development, attributed to their biodegradability, biocompatibility, and mechanical properties. This study analyzes the crystallographic properties of PLLA, PLA, and PCL through X-ray diffraction (XRD) to enhance understanding of their structural characteristics and performance in medical applications. The main aim is to analyze these polymers' structural differences, as these elements significantly affect their mechanical properties, flexibility, and biodegradation rates. The methods utilized involve the preparation of powder pellets from each polymer, followed by XRD analysis conducted with a Shimadzu XRD-7000 instrument, where diffraction data were collected over a 2? range of 20° to 80°. The results demonstrate unique XRD patterns for each polymer, with PLLA showing pronounced peaks at 10.05°, 22.64°, and 39.43°, signifying high crystallinity, which is associated with enhanced mechanical strength and reduced degradation rates. PLA exhibited multiple peaks at 19.76°, 22.74°, and 28.82°, indicating a well-organized crystalline structure, whereas PCL displayed a characteristic peak at 22.42°, signifying its semicrystalline nature. The study concludes that XRD is essential for elucidating the crystallographic characteristics of these polymers, facilitating the optimization of material properties for biomedical applications, including tissue engineering, drug delivery systems, and biodegradable implants. The findings contribute to the advancement of safer and more efficient biomaterials for clinical applications.
Publication Details
Page(s) 1044-1052
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 14, Year: 2025

Request the full text from PASTIC

Keywords
PCL, X-ray Diffraction, PLA, biopolymer, Biomaterial, Biomedical applications, PLLA
References
Malhotra B. D.,Ali M. A.,Ali B.D.,M.A.B.T B.D. .2018 .Chapter 7 - Nanostructured Biomaterials for In Vivo Biosensors. , : 323-219.
Battig M. R.,Wang Y.,Laurencin S.G.,Deng C.T.,T S.B.P. .2014 .Chapter 17 - Nucleic Acid Aptamers for Biomaterials Development. , : 12-299.
Mehtani D.,Seth A.,Sharma P.,Maheshwari N.,Kapoor D.,Shrivastava S. K.,Tekade R. K.,R.K.B.T R. K. .2019 .Chapter 4 - Biomaterials for Sustained and Controlled Delivery of Small Drug Molecules. In Advances in Pharmaceutical Product Development, : 12-152.
Ullah S.,Chen X. .2020 .Challenges of Natural Biomaterials in Tissue Engineering. , 100656 : .
Kurowiak J.,Klekiel T.,Bedznski R.,Challenges Future .2023 .Biodegradable Polymers in Biomedical Applications : A Review - Developments, Perspectives. Int. J. Mol. Sci, 24 : 1-18.
Xu X.,Yang J.,Ding L.,Li J.,Grafted-PolyLactic Acid-Polycaprolactone Nanoparticles Promote Bone Repair Encapsulated .2015 .. Cell Biochem. Biophys, 71 : 215-225.
Ismail R.,Cionita T.,Lai Y. L.,Fitriyana D. F.,Siregar J. P.,Bayuseno A. P.,Nugraha F. W.,Muhamadin R. C.,Irawan A. P.,Hadi A. E. .2022 .Characterization of PLA/PCL/Green Mussel Shells Hydroxyapatite (HA) Biocomposites Prepared by Chemical Blending Methods. Materials (Basel), 15 : 1-18.
Zan J.,Qian G.,Deng F.,Zhang J.,Z. J. .2022 .Dilemma and Breakthrough of Biodegradable Poly- L -Lactic Acid in Bone Tissue Repair. J. Mater. Res. Technol, 17 : .
Capuana E.,Lopresti F.,Ceraulo M.,La Carrubba V. M.,Poly-L-Lactic Acid .2022 .-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications. Polymers (Basel), 14 : 1-29.
Ali A.,Chiang Y. W.,Santos R. M. .2022 .X-Ray Diffraction Techniques for Mineral Characterization: A Review for Engineers of the Fundamentals, Applications. , 12 : 1-25.
Surdu V.,Gyorgy R. .2023 .X-Ray Diffraction Data Analysis by Machine Learning Methods -. Appl. Sci. 13, : 1-22.
Uzun İ. .2023 .Methods of Determining the Degree of Crystallinity of Polymers with X-Ray Diffraction: A Review. J. Polym. Res, 30(394) : .
Yang Y.,Chen M.,Li H.,Li H. .2018 .The Degree of Crystallinity Exhibiting a Spatial Distribution in Polymer Films. Eur. Polym. J, 107 : 303-307.
Anwer K.,Khan M. R.,Jawad M.,Akram N.,Faisal Z. .2023 .Mechanical Properties of Protein-Based Food Packaging Materials. Polymers (Basel), 15 : 1-13.
Fournet M. B.,McDonald P.,Mojicevic M. .2020 .Production of Polyhydroxybutyrate (PHB) and Factors Impacting Its Chemical and Mechanical Characteristics. , 12 : 1-20.
Topham P.,Punyodom W.,Dumklang M.,Ind M. .2021 .Comparison and Characterization of Different Polyester Nano / Micro Fibres for Use in Tissue Engineering Applications. , 50 : 870-890.
Solechan S.,Suprihanto A.,Widyanto S. A.,Triyono J.,Fitriyana D. F.,Siregar J. P.,Cionita T. .2022 .Investigating the Effect of PCL Concentrations on the Characterization of PLA Polymeric Blends for Biomaterial Applications. Materials (Basel), 15 : 1-13.
Meng C.,Tang D.,Liu X.,Meng J.,Wei W.,Gong R. H.,Li J. .2023 .. International Journal of Biological Macromolecules Heterogeneous Porous PLLA / PCL Fibrous Scaffold for Bone Tissue Regeneration, 235 : .
Rihayat T.,Yunus M.,Hasanah U.,Safitri A. .2024 .The Impact of Chitosan Incorporation on the Mechanical Characteristics of Biodegradable Packaging Based on PLA / PCL Blend. E3S Web Conf, 503 : 1-11.
Oliver-cuenca V.,Salaris V.,Muñoz-gimena P. F.,Agüero Á.,Peltzer M. A.,Alc V.,Arrieta M. P.,Sempere-torregrosa J,Pavon C.,Samper M. D. C. .2024 .Bio-Based and Biodegradable Polymeric Materials for a Circular Economy. Polymers (Basel), 16 : 1-86.
Zhao X.,Ur M.,Dissanayaka T.,Gharagheizi F.,Lacerda C.,Senadheera S.,Hedden R. C.,Christopher G. F. .2021 .Rheological Behavior of a Low Crystallinity Polyolefin-Modified Asphalt Binder for Flexible Pavements. Case Stud. Constr. Mater, 15 : .
Grigoriev T. E.,Bukharova T. B.,Vasilyev A. V.,Leonov G. E.,Zagoskin Y. D.,Kuznetsova V. S.,Gomzyak V. I.,Salikhova D. I.,Makhnach O. V D. I. .2018 .Effect of Molecular Characteristics and Morphology on Mechanical Performance and Biocompatibility of PLA-Based Spongious Scaffolds. , 8 : 977-983.
Furko M.,Mih Horv Z. E.,Bal J.,K. J. .2021 .Comparison of the Morphological and Structural Characteristics of Bioresorbable and Biocompatible Hydroxyapatite-Loaded Biopolymer Composites. , 11 : 1-17.
Younus M. M.,Naguib H. M.,Fekry M.,Elsawy M. A. .2023 .Pushing the Limits of PLA by Exploring the Power of MWCNTs in Enhancing Thermal, Mechanical Properties, and Weathering Resistance. Sci. Rep, 13 : .
Aydemir D.,Gümüş H.,Altuntaş E.,Yalçın Ö,Z. E. Ö .2024 .Biopolymer Nanocomposite Blends of Poly(Lactic Acid) and Polyhydroxybutyrate Biopolymers Reinforced With Cellulose Nanofibrils at Low Loading Ratio. Polym. Adv. Technol, 35 : .
Bher A.,Uysal‐Unalan I.,Auras R.,Rubino M.,Schvezov C. E. .2018 .Toughening of Poly (Lactic Acid) and Thermoplastic Cassava Starch Reactive Blends Using Graphene Nanoplatelets. Polymers (Basel), 10(95) : .
Ranjbar M.,Pardakhty A.,Tahmipour B.,Mohamadzadeh I. .2019 .Novel CaO/Polylactic Acid Nanoscaffold as Dental Resin Nanocomposites and the Investigation of Physicochemical Properties. , 34 : 360-367.
Shamsabadi O. D.,Soltanolkottabi F. .2024 .Green Nanocomposite of. , 32 : .
Li H.,Wu Z.,Tao D.,Zhong G.,Zhu W.,Qiu H.,Liu P.,C. P. .2016 .Crystallisation, Mechanical Properties and Rheological Behaviour of PLA Composites Reinforced by Surface Modified Microcrystalline Cellulose. Plast. Rubber Compos. Macromol. Eng, 45 : 0000000040-187.
Yue H.,Fernández‐Blázquez J. P.,Vilatela J. J.,Pérez E. .2019 .Crystallization Analysis of Polylactic Acid in the Presence of Carbon Nanotube Fibers with Tunable Fiber Loadings through Polymer Infiltration. Polym. Cryst, 2 : 10081.
Lin J.,Yang Z.,Hu X.,Hong G.,Song W. .2018 .The Effect of Alkali Treatment on Properties of Dopamine Modification of Bamboo Fiber/Polylactic Acid Composites. Polymers (Basel), 10(403) : .
Kusuma E. W.,Larasati A.,Nurkhamidah S.,Altway A.,Desain Pabrik Poly-L-Lactic Acid (PLLA) Dari Tetes Tebu Pra .2020 .. J. Tek. ITS, 8 : F139-F145.
Fitriyana D. F.,Nugraha F. W.,Laroybafih M. B.,Ismail R.,Bayuseno A. P.,Muhamadin R. C.,Ramadan M. B.,Qudus A. R. A.,Siregar J. P. .2022 .The Effect of Hydroxyapatite Concentration on the Mechanical Properties and Degradation Rate of Biocomposite for Biomedical Applications. IOP Conf. Ser. Earth Environ. Sci. 969, : 1755.
Ismail R.,Fitriyana D. F.,Nugraha F. W.,Bayuseno A. P.,Ammarullah M. I. .2024 .Investigation of the Influence of 3D Printing Parameters on the Properties of Interference Screws Made of PLA/PCL/HA Biocomposite Filaments. Mater. Technol, 2443598 : 1-19.
Kadowaki Y.,Kojio K.,Poly (L-Lactic Acid,Analyses Thermal .2022 .(PLLA)/Poly(Butylene Succinate) (PBS) Blends Based on in Situ Simultaneous Wide-Angle x-Ray Diffraction/Small-Angle x-Ray Scattering Techniques. J. Polym. Res, 29(137) : .
Avelar L.,Ong A.,Ong D.,Wai A. C. S.,Wai A. Y. T.,Sungkyu J.,Seok L. H.,Tam E.,Leng S. E.,Huang J. .2023 .Consensus Recommendations on the Use of Injectable Poly-l-Lactic Acid in Asian Patients. J. Cosmet. Dermatol, 22 : 3223-3231.
Capuana E.,Lopresti F.,Ceraulo M.,La Carrubba V. M. .2022 .Poly-l-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications. Polymers (Basel), 14 : .
Ao Y.-J. ,Yi Y.,Wu G.-H. .2024 .Application of PLLA (Poly-L-Lactic Acid) for Rejuvenation and Reproduction of Facial Cutaneous Tissue in Aesthetics: A Review. Medicine (Baltimore), 103 : .
Zhou Z.,Liu L.,Liu Q.,Yi Q.,Zhao Y.,Zeng W.,Liu X. .2012 .Biological Assessment of Composite Materials Based on Poly-L-Lactide and Bovine Bone. Int. J. Polym. Mater, 664213 : 81-84.
Bergström J.,Hayman D. .2015 .An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications. , 44 : 330-340.
Wang C.,Liu Y.,Han G. .2019 .Study of the Mechanical Behavior of Z-Structure Stents Produced by Poly-L-Lactic Acid Multi-Ply Strands. Text. Res. J, 89 : 4230-4238.
Yang F.,Niu X.,Gu X.,Xu C.,Wang W.,Fan Y.,Magnesium-Incorporated Poly (l-Lactic Biodegradable,Acid Biodegradable .2019 .Microspheres for Manipulation of Drug Release and Alleviation of Inflammatory Response. ACS Appl. Mater. Interfaces, 11 : 23546-23557.
Naffakh M.,Díez‐Pascual A .2015 .WS2 Poly (l-Lactic Composite Biomaterials. RSC 10.1039/c5ra10707e. Adv, 5 : 65514-65525.
Alcotzer I.,Liassidou A.,Hexsel D.,Shenhav L. T.,Artzi O. .2023 .Optimal Changes Seen in Patients after Treatment with Poly-L-Lactic Acid: A Retrospective Descriptive Study. Dermatologic Surg, 50 : 69-74.
Raza M. A.,Sharma M. K.,Nagori K.,Jain P.,Ghosh V.,Gupta U. .2024 .Ajazuddin Recent Trends on Polycaprolactone as Sustainable Polymer-Based Drug Delivery System in the Treatment of Cancer: Biomedical Applications and Nanomedicine. Int. J. Pharm, 124734(124734) : .
0

Citations

0

Downloads

23

Views