No Detail Found!

Comparative study and prediction of machining vibration during milling of AA6061 alloys under sunflower vegetable oil

Author(s)
Peter Omoniyi Department of Mechanical Engineering Science, University of Johannesburg,Johannesburg,South Africa
Abstract
Manufacturing is a significant aspect of transforming raw materials into a finished product. One of the standard methods is computer numerical control via the milling process, which involves removing unwanted materials from the workpiece. This process is carried out with a combination of cutting parameters such as feed rate, depth of cut, and spindle speed. During this process, heat generation occurs due to the chip's discontinuity at the cutting region, which also causes friction that leads to tool wear and high machining vibration. This study aimed to conduct an experimental analysis to study the cutting parameters effect on machining vibration during the milling of AA6061 alloys. The study involves three variable parameters, cutting depth, spindle speed, and feed rate, at three levels. The Box Behnken surface response methodology was implemented for the experimental study, as well as the prediction and optimization of the machining vibration. Two cutting fluids, mineral oil, and sunflower oil, were used as coolants. From the result, the sunflower oil cutting fluid reduces the vibration by 3.3% compared to the mineral oil. The results showed that the developed model predicted the machining vibration with 93% accuracy. The minimum machining vibration was achieved with optimal cutting parameters of spindle speed of 2827 rpm, feed rate of 143 mm/rev, cutting depth of 1.16 mm, and the lowest machining vibration of 40 mm/sec. This study of the interaction effects of cutting parameters on machining vibration significantly improved the machining performance for the aluminum alloy.
Publication Details
Page(s) 322-333
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 6, Year: 2025

Request the full text from PASTIC

Keywords
vegetable oil, Milling, AA6061 alloys, machining vibration, cutting parameter
References
Duman E.,Yapan Y.F.,Salvi H.,Sofuoğlu M.A.,Khanna N.,Uysal A. .2023 .Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses. Journal of Cleaner Production, 434 : 140187.
Akdeniz E.,Arslan H. .2024 .Experimental Study on New Tool Holder Design to Reduce Vibration in Turning Operations. Journal of Vibration Engineering & Technologies, : 1-13.
Okokpujie I. P.,Sinebe J. E.,Tartibu L. K J. E. .2024 .Study of the Effects of Five Different Machining Fluids on the Surface Hardness and Corrosion Behaviour of Al6061 Alloy. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42(2) : 72-88.
Venkateswarlu K.,Varma K.P.V.,Nutakki U.K. .2024 .Effect of nanoparticle reinforcement and cryogenic treatment on aluminum alloys for enhancement of mechanical and microstructural characteristics-a review. International Journal on Interactive Design and Manufacturing (IJIDeM), : 1-20.
Okokpujie I.P.,Ikumapayi O.M.,Okonkwo U.C.,Salawu E.Y.,Afolalu S.A.,Dirisu J.O.,Nwoke O.N.,Ajayi O.O. .2017 .Experimental and mathematical modeling for prediction of tool wear on the machining of aluminium 6061 alloy by high speed steel tools. Open Engineering, 7(1) : 461-469.
Kazeem R.A.,Akinlabi E.T.,Gupta M.K.,Jamil M.,Wang X.,Song Q.,Mia Z.,Hegab M.,Khan H.,Collado A.M.,Pruncu A.G.,Imran C.I.,G.S. C.I. .2019 .Performance evaluation of vegetable oil-based nano-cutting fluids in environmentally friendly machining of inconel-800 alloy. International, 12(17) : 2792.
Techniques Machining . .. In Modern Optimization Techniques for Advanced Machining: Heuristic and Metaheuristic Techniques, : 25-39.
. .. , (7) : 2.
Kazeem R.A.,Fadare D.A.,Akande I.G.,Jen T.C.,Akinlabi S.A.,Akinlabi E.T. .2024 .Evaluation of crude watermelon oil as lubricant in cylindrical turning of AISI 1525 steel employing Taguchi and grey relational analyses techniques. Heliyon, 10(3) : .
Tiwari S.,Amarnath M. .2024 .Improving the machining performance with bio-degradable coconut oil-assisted MQL turning of AISI-1040 steel: a sustainable machining approach. Biomass Conversion and Biorefinery, 14(19) : 24731-24751.
Okokpujie I.P.,Ohunakin O.S.,Bolu C.A. .2021 .Multi-objective optimisation of machining factors on surface roughness, material removal rate and cutting force on end-milling using MWCNTs nanolubricant. Progress in Additive Manufacturing, 6 : 155-178.
Kazeem R.A.,Akinlabi E.T. .2024 .Experimental investigation of machine vibration rate and machine sound level in MQL turning of AISI 1525 steel employing mango oil as lubricant. International Journal on Interactive Design and Manufacturing (IJIDeM), : 1-16.
Okokpujie I.P.,Tartibu L.K. .2023 .Cutting Fluid and Its Application with Different Delivering Machining Techniques. In Modern Optimization Techniques for Advanced Machining: Heuristic and Metaheuristic Techniques, (7) : 2-39.
Okokpujie I.P.,Sinebe J.E.,Tartibu L.K. .2024 .Study of the Effects of Five Different Machining Fluids on the Surface Hardness and Corrosion Behaviour of Al6061 Alloy. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42(2) : 72-88.
Lawal S.A.,Medupin R.O.,Yoro K.O.,Ukoba K.O.,Okoro U.G.,Adedipe O.,Abutu J.,Tijani J.O.,Abdulkareem A.S.,Ndaliman M.B.,Abdulrahman A.S. .2024 .Nano-titania and carbon nanotube-filled rubber seed oil as machining fluids. Materials Chemistry and Physics, 129126 : 129126.
Yin T.,Zhao T.,Du H.,Zhang G.,Zhao Z.,Hang W.,To S. .2024 .Investigation of forced wheel spindle vibration influence on surface formation in grinding of hard materials. Mechanical Systems and Signal Processing, 111921 : 111921.
Silva F.J.,Martinho R.P.,Magalhães L.L.,Fernandes F.,Sales-Contini R F.,Durão L.M.,Casais R.C.,Sousa V.F. .2024 .Vibration. Journal of Manufacturing and Materials Processing, 8(3) : 115.
Ehsan S.,Ali M.A.,Khan S.A.,Sana M.,Yasir M.,Anwar S.,Farooq M.U. .2024 .Understanding the Effects of Cutting Conditions on Vibrations, Surface Integrity, Machining Temperature and Tool Wear Mechanisms in End Milling of AISI D2 Steel. , 109894 : 109894.
0

Citations

0

Downloads

67

Views