No Detail Found!

Effect of corncob powder on the mechanical behavior of glass fiber/epoxy hybrid composites

Author(s)
Amirrul Luqman Badrulhisam Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Nurin Faqira Rozi Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Najiyah Safwa Khashi'ie Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Khairum Bin Hamzah Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Sayed Kushairi Sayed Nordin Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Irianto Department of General Education, Faculty of Resilience, Rabdan Academy,Abu Dhabi,United Arab Emirates
Abstract
The incorporation of natural fibers into composite materials serves as an environmentally sustainable approach by integrating biodegradable components. By blending natural and synthetic fibers, the utilization of natural fibers in hybrid composites can be expanded, resulting in potential cost reductions in production. This study investigates the mechanical properties of glass fiber/epoxy hybrid composites reinforced with corncob powder. The composite specimens were fabricated using a layering method, incorporating glass fiber, epoxy resin, and corncob powder. Five different ratios of corncob powder to epoxy resin were tested (10:90, 40:60, 50:50, 70:30, and 80:20) to evaluate their tensile, flexural, and impact performance. Statistical analysis using ANOVA was conducted to interpret the results and determine the optimal composition. The composite with 10% corncob powder exhibited superior tensile strength (37.28 MPa) and flexural strength (805.75 MPa), attributed to enhanced resin-particle bonding and load transfer. The impact strength peaked at a 70:30 ratio, indicating improved toughness at moderate filler content. These results highlight the potential of corncob powder as a sustainable, eco-friendly filler that enhances mechanical properties while reducing environmental waste.
Publication Details
Page(s) 567-573
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 10, Year: 2025

Request the full text from PASTIC

Keywords
Natural fiber, Mechanical properties, Epoxy resin, corn cob powder, mechanical testing
References
Christiansen A. G.,Carstensen O.,Sommerlund M.,Clausen P. A.,Bønløkke J. H.,Schlünssen V.,Isaksson M.,Schmidt S. A.,Kolstad H. A. .2022 .Prevalence of skin sensitization and dermatitis among epoxy‐exposed workers in the wind turbine industry. British Journal of Dermatology, 187(6) : 988-96.
Sanjay M. A.,B. Yogesha B. M. A. .2016 .Studies on the mechanical properties of jute/E-glass fiber reinforced epoxy hybrid composites. Journal of Minerals and materials characterization and engineering, 4(1) : 15-25.
Oladele I. O.,Isola B. A.,Falodun S.,Ogbu E. .2017 .Comparative Investigation of the Influence of Mercerization Treatment on White and Yellow Maize Corncobs Reinforced Epoxy Composites. Acta Technica Corviniensis-Bulletin of Engineering, 10(3) : .
Bhagwat P. M.,Ramachandran M.,Raichurkar P. .2017 .Mechanical properties of hybrid glass/carbon fiber reinforced epoxy composites. Materials Today: Proceedings. 4, (8) : 7375-80.
Sathishkumar G. K.,Ibrahim M.,Akheel M. Mohamed,Rajkumar G.,Gopinath B.,Karpagam R.,Karthik P.,Charles M. Martin,Shankar G. Gowri . .Synthesis and mechanical properties of natural fiber reinforced epoxy/polyester/polypropylene composites: a review. Journal of Natural Fibers, 19(10) : 3718-41.
Kumar R.,Bairwa K. N.,Sharma T. K. .2023 .Optimization in Flexural and Physical Behavior of Agricultural Waste Reinforced Epoxy-Based Polymer. , : .
Garadimani K. R.,Raju G. U.,Kodancha K. G. .2015 .Study on Mechanical Properties of Corn Cob Particle and E-Glass Fiber Reinforced Hybrid Polymer Composites. American Journal of Materials Science, 5(3C) : 86-91.
Liu Z.,Wang H.,Yang L.,Du J. .2022 .Research on the mechanical properties and durability of flax/glass fiber bio-hybrid FRP composites laminates. Composite Structure, 290 : 115566.
0

Citations

0

Downloads

53

Views