No Detail Found!

Experimental investigation of pv module cooling using phase change materials

Author(s)
R. S. Rejon Department of Mechanical Engineering/Environmental Technology, Ostbayerische Technische Hochschule Amberg-Weiden Amberg,,Germany
M. M. Hasan Department of Industrial and Production Engineering, Shahjalal University of Science and Technology,Sylhet,Bangladesh
M. M. A. Khan Department of Industrial and Production Engineering, Shahjalal University of Science and Technology,Sylhet,Bangladesh
A. B. M. A. Malek Department of Industrial and Production Engineering, Shahjalal University of Science and Technology,Sylhet,Bangladesh
A. Kabir Department of Industrial and Production Engineering, Shahjalal University of Science and Technology,Sylhet,Bangladesh
Abstract
The high surface temperature of a photovoltaic (PV) module negatively affects its overall efficiency and power output. In the present work, the effects of various simple cooling methods, including a passive method using phase change materials (PCM) have been investigated for a 50-watt (W) PV module made of polycrystalline Silicon (Poly-Si). As a cheap PCM, the locally available wax mixed with palm oil was used for the investigated cooling approaches. Two different PCM mixes were utilized: for the copper tubes, 70% wax and 30% palm oil (melting temperature ~ 45.5ºC), and for the aluminium boxes, 80% wax combined with 20% oil (melting temperature ~ 48ºC) was used. A data-logging device for recording output power and panel temperatures during tests was developed using an ESP-32 microcontroller and several sensors (current, voltage, and temperature). The aluminium box-based PCM cooling method with aluminium fins is found to be the most effective passive cooling method with maximum temperature reduction and efficiency. With this approach, panel temperature is lowered by more than 20% when solar irradiation exceeds 800 W/m2. Furthermore, with a lower deterioration rate of 0.0584 %/ºC, the panel efficiency varies from 12.6% to 13.6%.
Publication Details
Page(s) 779-788
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 12, Year: 2025

Request the full text from PASTIC

Keywords
Solar energy, deterioration rate, PCM (Phase Change Materials), photovoltaic (PV) panel, panel efficiency, polycrystalline-silicon
References
Rezvanpour M.,Borooghani D.,Torabi F.,Pazoki M. .2020 .Using CaCl2·6H2O as a phase change material for thermo-regulation and enhancing photovoltaic panels' conversion efficiency: Experimental study and TRNSYS validation. Renewable Energy, 146 : 1907-1921.
Energy Agency International .2015 .. , : .
.2016 .Climate Action Plan 2050 - Principles and goals of the German government's climate policy. , : .
.2025 .National Database of Renewable Energy, Bangladesh. id=7. Accessed 15 July, : .
.2025 .[5] Department of Economic and Social Affairs Sustainable Development, United Nations. Goal 7: Ensure access to affordable, reliable, sustainable and modern energy for all. org/goals/goal7. Accessed 15 July, : .
Baky M. A. H.,M. M. Rahman M. A. H.,A. K. M. S. Islam M. A. H. .2017 .Development of renewable energy sector in Bangladesh: Current status and future potentials. Renewable and Sustainable Energy Reviews, 73 : 1184-1197.
Teo H. G.,Lee P. S.,Hawlader M. N. A. .2012 .An active cooling system for photovoltaic modules. Applied Energy, 90(1) : 309-315.
Bayrak F.,Oztop H. F.,Selimefendigil F. .2020 .Experimental study for the application of different cooling techniques in photovoltaic (PV) panels. Energy Conversion and Management, 212(1) : 9.
Idoko L.,Anaya-Lara O.,McDonald A. .2018 .Enhancing PV modules efficiency and power output using multi-concept cooling technique. Energy Reports, 4 : 357-369.
Irwan Y. M.,Leow W. Z.,Irwanto M.,Fareq M.,Amelia A. R.,Gomesh N.,Safwati and I. .2015 .Indoor test performance of PV panel through water cooling method. Energy Procedia, 79 : 604-611.
Kabeel A. E.,Abdelgaied M.,Sathyamurthy R. .2019 .A comprehensive investigation of the optimization cooling technique for improving the. , : .
M. A. A. B. Ishak A.,Ibrahim K.,Sopian M. F.,Fauzan A. A.,Rahmat N. J.,Yusaidi N. J. .2023 .Performance and economic analysis of a reversed circular flow jet impingement bifacial PVT solar collector. International Journal of Renewable Energy Development, 12(4) : 780-788.
M. M. Rahman M.,Hasanuzzaman N. A.,Rahim N. A. .2015 .Effects of various parameters on PV-module power and efficiency. Energy Conversion and Management, 103 : 348-358.
M. M. Hasan A. A.,Rifat O. F.,Safwan K. M. E.,Hasan K. M. E. .2022 .Effects of simple cooling methods on power output and efficiency of solar panels in outdoor conditions. ARPN Journal of Engineering and Applied Sciences, 17(3) : 288-294.
Sharma A.,Tyagi V. V.,Chen C. R.,Buddhi D. .2009 .Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews, 13(2) : 318-345.
Stropnik R.,Stritih U. .2016 .Increasing the efficiency of PV panel with the use of PCM. Renewable Energy, 97 : 671-679.
Ahmadi R.,Monadinia F.,Maleki M. .2021 .Passive/active photovoltaic-thermal (PVT) system implementing infiltrated phase change material (PCM) in PS-CNT foam. Solar Energy Materials and Solar Cells, 222(1) : 15.
Hasan A.,Sarwar J.,Alnoman H.,Abdelbaqi S. .2017 .Yearly energy performance of a photovoltaicphase change material (PV-PCM) system in hot climate. Solar Energy, 146 : 417-429.
Dukhan W. A.,Dhaidan N. S.,Al-Hattab T. A .2020 .Experimental investigation of the horizontal double pipe heat exchanger utilized phase change material. IOP Conference Series: Materials Science and Engineering, 671(1) : 18.
Carmona M.,Bastos A. Palacio,García J. D. .2021 .Experimental evaluation of a hybrid photovoltaic and thermal solar energy collector with integrated phase change material (PVT-PCM) in comparison with a traditional photovoltaic (PV) module. Renewable Energy, 172 : 680-696.
Biwole P. H.,Groulx D.,Souayfane F.,Chiu T. .2018 .Influence of fins size and distribution on solidliquid phase change in a rectangular enclosure. International Journal of Thermal Sciences, 124 : 433-446.
Li M.,Zinkle S. J. .2012 .Physical and mechanical properties of copper and copper alloys. Comprehensive Nuclear Materials, 4 : 667-690.
Groulx D.,Biwole P. H.,Bhouri M. .2020 .Phase change heat transfer in a rectangular enclosure as a function of inclination and fins placement. International Journal of Thermal Sciences, 151(1) : 17.
Mei J.,Davenport J. W. .1992 .Free-energy calculations and the melting point of Al. Physical Review B. , 46(1) : 21-25.
Nazir H.,Batool M.,Osorio F. J. B.,Isaza-Ruiz M.,Xu X.,Vignarooban K.,Phelan P.,Kannan A. M. .2019 .Recent developments in phase change materials for energy storage applications: A review. International Journal of Heat and Mass Transfer, 129 : 491-523.
Sharma A.,Tyagi V. V.,Chen C. R.,Buddhi D. .2009 .Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews, 13(2) : 318-345.
Cunha J. P. D.,Eames P. .2016 .Thermal energy storage for low and medium temperature applications using phase change materials - A review. Applied Energy, 177 : 227-238.
Luyt A. S.,Krupa I. .2008 .Thermal behaviour of low and high molecular weight paraffin waxes used for designing phase change materials. Thermochimica Acta, 467(1-2) : 117-120.
Khan K. A.,Ali M. H.,A. K. M. Obaydullah M. A.,Wadud M. A. .2019 .Production of candle using solar thermal technology. Microsystem Technologies, 25(12) : 4505-4515.
Piotrowski L. J.,Simões M. G.,Farret F. A. .2020 .Feasibility of water-cooled photovoltaic panels under the efficiency and durability aspects. Solar Energy, 207 : 103-109.
Chander S.,Purohit A.,Sharma A.,Nehra S. P.,Dhaka M. S. .2015 .Impact of temperature on performance of series and parallel connected monocrystalline silicon solar cells. Energy Reports, 1 : 175-180.
0

Citations

0

Downloads

19

Views