No Detail Found!

Drilling parameters determination for slim wellbore in the white tiger field

Author(s)
Nguyen Huu Truong Department of Petroleum Engineering, Faculty of Petroleum, Petrovietnam University,Ba Ria Ward, Ho Chi Minh City,Vietnam
Abstract
Over the years, hundreds of wellbores with a diameter of 165.1 mm have been drilled into the basement formations of the continental shelf of Vietnam. However, low drilling performance has often been observed, primarily due to the instability of the drill string caused by inappropriate drilling parameters such as weight on bit (WOB), rotation speed (RPM), and mud pump flow rate (Q). These suboptimal parameters result in decreased drilling efficiency and a reduced rate of penetration (ROP). To address this issue, this study applies the mapping theory method to investigate the dynamic stability of the drill string when drilling into basement rocks. Dynamic stability is a critical factor in determining the optimal drilling parameters. The results indicate that for a wellbore diameter of 165.1 mm, the optimal drilling parameters are a WOB of 4.65 tons, an RPM of 93, and a mud pump flow rate of 17.4 liters per second.
Publication Details
Page(s) 1293-1301
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 16, Year: 2025

Request the full text from PASTIC

Keywords
dynamic stability of the drill string, white tiger field, slim wellbore, drilling parameters
References
. .Role of the E-W fault system in Hai Su Den structure from seismic interpretation to tectonic reconstruction. , : 70-87.
Nguyen N. T. B.,Dang C. T. Q.,Bae W.,Phung T. H.,Lee W. .2010 .A review of geological characteristics and improved oil recovery for high temperature fractured basement reservoir, Vietnam. Journal of Energy Sources: Part A., : .
Muench Graham J. W.,N. L. Graham J. W. .1959 .Analytical Determination of Optimum Bit Weight and Rotary Speed Combinations. , : .
Reed R. L. ,SPE Annual Fall Meeting .1971 .A Monte Carlo Approach to Optimal Drilling. SPE 3513, : .
Jr. Bourgoyne A. T.,Young F. S. .1974 .A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure Detection. SPE 4238., : .
Simmons E. L. .1986 .A Technique for Accurate Bit Programming and Drilling Performance Optimization. , : .
Drilling IADC,Conference IADC . .. , : .
Warren T. M. .1986 .Penetration-Rate Performance of Roller-Cone Bits. SPE 13259, SPE Annual Technical Conference, : .
Miska Stefan .1988 .Developments in Petroleum Engineering. (Collected works of Arthur Lubinski), 2 : 266-275.
Ohara Maidla E. E. and S. .1991 .Field Verification of Drilling Models and Computerized Selection of Drill Bit, WOB, and Drillstring Rotation. , : 189-195.
Williams Ursem L. J.,Pellerin J. H.,N. M. J. H.,Kaminski D. H. J. H. .2003 .Real Time Operations Centers; The people aspects of Drilling Decision Making. , : .
Merlo F.,Nossaman A.,Sweep L. N.,Knut M. N.,Inge M. S.,S. M. S. .2004 .Drilltronics: An Integrated System for Real-Time Optimization of the Drilling Process. , : .
Koederitz Dupriest F. E.,W. Dupriest F. E.,Drilling Conference .2005 .Maximizing Drill Rates with Real-Time Surveillance of Mechanical Specific Energy. , : .
Arnold V. I. .1999 .Bifurcation theory and catastrophe theory, Translated from the Russian. , : .
Ma Tian,Wang Shouhong,Scientific World .2005 .. Bifurcation Theory and Applications, 53 : .
Galle E. M and Woods A. B. .1963 .Best Constant Weight and Rotary Speed for Rotary Rock Bits. , : .
Prac. . .. API, : 48-73.
Kижнесоб Бажыкин A. Д.,Хибник C. П.,И A. .1989 .. , : .
Eckel J. R. ,SPE Annual Fall Meeting .1968 .Microbit Studies of the Effect of Fluid Properties and Hydraulics on Drilling Rate, II. , : .
Бланк M. Л .1990 .Устойчивость и локальная устойчивость в хаостической динамике. , (26) : 95-101.
0

Citations

0

Downloads

22

Views