No Detail Found!

Statistical analysis of glass fibre epoxy composites reinforced with rice waste

Author(s)
Nur Farhana Barahim Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Nurul Amira Zainal Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Sayed Kushairi Sayed Nordin Fakulti Teknologi dan Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Irianto Harny Department of General Education, Faculty of Resilience, Rabdan Academy,Abu Dhabi,United Arab Emirates
Abstract
The utilization of natural waste-based materials in engineering has garnered growing interest due to their environmental sustainability and material efficiency. This study quantitatively investigates the effect of rice waste as filler on the mechanical properties of glass fibre epoxy hybrid composites. The experimental design includes the fabrication of composite samples with varying rice waste filler content (10%, 40%, 50%, and 70% by weight), produced via the hand lay up technique. Specimens were machined to ASTM standards using a CNC router. Mechanical characterization was conducted through tensile, flexural, and impact testing, generating quantitative performance data. Statistical analysis, including Analysis of Variance (ANOVA) and regression modeling, was performed using Minitab software to assess the significance of rice waste content on mechanical responses. Results indicate statistically significant effects of filler ratio on tensile strength (p < 0.05), flexural strength (p < 0.05), and impact resistance (p < 0.05). The optimal filler content was identified based on multiresponse optimization criteria, balancing mechanical performance across all tests. These findings support the viable integration of agricultural waste in structural composite materials and provide a statistically robust foundation for future material development.
Publication Details
Page(s) 1225-1232
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 20, Issue: 15, Year: 2025

Request the full text from PASTIC

Keywords
mechanical properties, Hybrid composite, ASTM, rice waste, ANOVA
References
Carmona-Cervantes I. A.,Campos-Silva I.,Guevara-Morales A. .2023 .Effect of recycled polyvinyl butyral (rPVB) addition on the tribological performance of glass-fiber reinforced polyamide (PAGF) during reciprocating sliding wear conditions. Polymers (Basel), 15(11) : .
Yang Y.,Boom R.,van Heerden D. J.,de Wit H D. J. .2011 .Recycling of composite materials. Chemical Engineering and Processing: Process Intensification, 09 : 53-68.
Sandeep S.,Chirravuri N. N. .2018 .Genetic variability, heritability, and genetic advance studies in rice (Oryza sativa L.). International Journal of Current Microbiology and Applied Sciences, 712(12) : .
Kordi M.,Fauzi-Chan N M. .2024 .February. Rice husk at a glance: From agro-industrial to modern. , : .
Navaratnam S.,Subramaniam K. .2023 .January. Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment. Journal of Building Engineering. 62, Article, 105835 : .
Thangapandian S. S.,March. S. S. .2024 .Effects of chemical treatment on natural (rice straw/neem sawdust) fiber morphology and mechanical properties of its composite material. Materials Letters. 353, Article, 136288 : .
Laftah W. A.,Wan Abdul W. A. .2021 .Rice waste-based polymer composites for packaging applications: A review. Polymers and Polymer Composites, 29(9_suppl) : S1621-S1629.
Lantsoght Hidalgo Robayo N.,Batallas Tituaña E. O. L.,Montenegro Défaz,Játiva M.,Orejuela-Escobar F.,L. F. .2024 .Initial study on natural fibers for use in concrete mixes as a sustainable materials alternative. ACI Avances en Ciencias e Ingenierías, 16(1) : .
Azevedo A,Alexandre J.,Zanelato E. B.,Cecchin D.,Xavier G. C. ...,Monteiro S. N. .2021 .Natural fibers as an alternative to synthetic fibers in reinforcement of geopolymer matrices: A comparative review. Polymers, 13(15) : 2493.
Sujon M. A. S.,Habib M. A.,Abedin M. Z. .2020 .Experimental investigation of the mechanical and water absorption properties of fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites. Journal of Materials Research and Technology, 9(5) : 10970-10981.
Payne R. .2022 .Genstat® ANOVA and design: A guide to ANOVA and design in Genstat® (22nd ed. , : .
Torre L.,Kenny J. M. . .Impact testing and simulation of composite sandwich structures for civil transportation. Composite Structures, : .
Sujon A. S.,Supto T. H.,Shariar F.,Pallab M. M. R.,Abedin M. Z.,Habib M. A. .2020 .Fabrication and experimental investigation on tensile and flexural properties for different stacking sequences of jute and carbon fiber reinforced epoxy composite. Trans Tech Publications Ltd., 858 : 72-77.
0

Citations

0

Downloads

25

Views