No Detail Found!

Numerical study on crashworthiness of polygonal cross-section thin-walled beams under quasi static bending

Author(s)
Sanjay Patil Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Arvind Bhosale Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Vijaypatil Dhepe Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Dheeraj Lengare Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Kiran Bansode Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Rashtrapal Teltumade Department of Automobile Engineering, Government College of Engineering and Research,Avasari (kh), Pune, Maharashtra,India
Abstract
Higher energy absorption efficiency and better crashworthiness performance are always the primary goals of researchers. This paper aims to study the bending collapse bahaviour of polygonal cross-sectional thin wall beam (TWB) under quasi statics bending. TWB are commonly used as energy absorbers in automobiles due to their light weight and high energy absorption capacity. TWB that is circular or square is frequently used inside vehicle doors. This beam deforms and absorbs the maximum impact energy in the event of a side collision than other components of doors. The crashworthiness of polygonal cross-section TWBs subjected to bending load was investigated using numerical simulations, and they were compared to the corresponding circular and square cross-section TWBs. In this work polygonal TWB ranging from the pentagon to the dodecagon are considered for analysis. To evaluate the bending collapse performance of beams, specific energy absorption and crash force efficiency crashworthiness indicators are used. Finite element simulations were conducted in ABAQUS explicit dynamic software, and all polygon plastic hinges and flattening patterns were examined. The results show that heptagon, octagon, and nonagon cross-section TWB outdo square and circular TWB in crashworthiness performance.
Publication Details
Page(s) 392-399
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 4, Year: 2022

Request the full text from PASTIC

Keywords
plastic hinges, flattening patterns, specific energy absorption, energy absorption elements, crash force efficiency
References
Luzon-Narroa Javier,Hernando Luis M.,Selgasg Carlos .2014 .Innovative passive and active countermeasures for near side crash safety. International Journal of Crashworthiness, 19(3) : 209-221.
Long C. R.,S. C. R.,Nuricka G. N. .2019 .Analysis of a car door subjected to side pole impact. Latin American Journal of Solids and Structures, 16(8) : e226.
Zhang G.,Yu F.,Chen Z.,H. Z. .2015 .Study on Vehicle Collision Predicting using Vehicle Acceleration and Angular Velocity of Brake Pedal. SAE Technical Paper, 01 : .
Shaharuzaman M. A.,Sapuan S. M.,Mansor M. R.,Zuhri M. Y. M. .2018 .Passenger car's side door impact beam: A review. Journal of Engineering and Technology, 9(1) : .
Yang J.-H. .2011 .Optimization of the aluminum door impact beam considering the side door strength and the side impact capability. Journal of the Korea Academia Industrial Cooperation Society, 12(5) : 2025-2030.
Watson B.,Cronin D.S. .2011 .Side impact occupant response with varying positions. International Journal of Crashworthiness, 16(5) : 569-582.
Lee Haksung .2017 .Design optimization of thinwalled circular tubular structures with graded thickness under later impact loading. International Journal of Automotive Technology, 18(3) : 439-449.
Abramowicz W. .1981 .Simplified crushing analysis of thin-walled columns and beams. Rozpr. Inzynierskie, 29(1) : 5-26.
Kecman Dušan .1983 .Bending collapse of rectangular and square section tubes. Int. J. Mech. Sci, 25(9) : 623-636.
Hamidreza Saadatfard,Hatami Shahabeddin .2019 .A novel general theory for bending and plastic hinge line phenomena in indentation and flattening processes. Thin-Walled Structures, 136 : 150-161.
Elchalakani M.,Zhao X.L.,Grzebieta R.H. .2002 .Plastic mechanism analysis of circular tubes under pure bending. International Journal of Mechanical Sciences, 44 : 1117-1143.
Kotelko M.,Lim T.H.,Rhodes J. .2002 .Postfailure behaviour of box section beams under pure bending (an experimental study). Thin-Walled Structures, 38(2) : .
Soheila Maduliat,Lumantarna Raymond .2015 .Performance of hollow steel tube bollards under quasi-static and lateral impact load. Thin-Walled Structures, 88 : 41-47.
Poonaya S.,Teeboonma U.,Thinvongpituk C. .2009 .Plastic collapse analysis of thin-walled circular tubes subjected to bending. Thin-Walled Structures, 47(6) : 637-645.
Lee Haksung .2017 .Compressive behavior of automotive side impact beam with continuous glass fiber reinforced thermoplastics incorporating long fiber thermoplastics ribs. Fibers and Polymers, 18(8) : 1609-1613.
Sof M. I.,M M. I.,Wong Z. P.,K. J. Z. P.,Ahmad Z. Z. P. .2020 .Study of multi-cell thin-walled tube with various configuration under lateral loading. Materials Science and Engineering, 884(1) : 012086.
Li Guangyao,Sun Guangyong,Li Qing .2015 .Crashworthiness study on functionally graded thin walled structures. International Journal of Crashworthiness, 101 : .
Sanjay D.,Patil Arvind J.,Bhosale Arvind J.,Bansode Arvind J.,Rashtrapal B.,Teltumade B. .2020 .Parameters affecting the specific energy absorption of circular side impact beam. International Journal of Engineering and Advanced Technology, 9(3) : .
Bilston David,Ruan Dong .2019 .Parametric study of the cross-section shape of aluminium tubes in dynamic three-point bending. Thin-Walled Structures, 136 : 315-322.
Zonghua Zhang,Tang Zhiliang .2019 .Design optimization of cross-sectional configuration of rib-reinforced thin-walled beam. Thin-Walled Structures, 47 : 868-878.
Ghadianlou Ali .2013 .Crashworthiness design of vehicle side door beams under low-speed pole side impacts. Thin-Walled Structures, 67 : 25-33.
Tao Tang,Wang Han .2016 .Crushing analysis of thin-walled beams with various section geometries under lateral impact. Thin-Walled Structures, 102 : 43-57.
Xiong Zhang .2016 .Bending collapse of square tubes with variable thickness. International Journal of Mechanical Sciences, 106 : 107-116.
Amit Pathak,Lamba Rahul .2017 .Effect of beam layout and specification on side door strength of passenger cars: an experimental approach to analyze its effect and contribution to door strength. SAE Technical Paper 26-0023., : .
Tarlochan A. N F.,Samer F.,A.M.S. Hamouda B,Karam Khalid C .2013 .Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces. Thin-Walled Structures, 71 : 7-17.
Hakim S.,Sultan Aljibori,Al-Qrimli Haidar F.,Ramli Rahizar,Chong W. P. Rahizar .2018 .A comparative Analysis of Experimental and Numerical Investigations of Composite, Tubes under Axial and Lateral Loading. Australian Journal of Basic and Applied Sciences, 4(8) : 3077-3085.
Emin Muhammed,Erdin Muhammed .2016 .Quasi-static axial crushing behavior of thin-walled circular aluminum tubes with functionally graded thickness. Procedia Engineering, 149 : 559-565.
Chen D.H.,Masuda K. .2016 .Rectangular hollow section in bending: Part I - Cross-sectional flattening deformation. Thin-Walled Structures, 106 : 495-507.
Patil S.,Bhosale A.,Dhepe V.,Lengare D.,Kakde R. .2021 .Impact Energy Absorption Capability of Polygonal Cross-Section Thin-Walled Beams under Lateral Impact. International Journal of Innovative Research and Scientific Studies, 4(4) : 96-214.
0

Citations

0

Downloads

9

Views