No Detail Found!

Fire resistance testing of geopolymer concrete with fire-retardant coating agent

Author(s)
Nadiah Salsabila Department of Civil Engineering, Faculty of Technology and Design,Universitas Pembangunan Jaya,Indonesia
Agustinus Agus Setiawan Centre for Urban Studies,Universitas Pembangunan Jaya,Indonesia;Department of Civil Engineering, Faculty of Technology and Design,Universitas Pembangunan Jaya,Indonesia
Pratika Riris Putrianti Centre for Urban Studies,Universitas Pembangunan Jaya,Indonesia;Department of Civil Engineering, Faculty of Technology and Design,Universitas Pembangunan Jaya,Indonesia
Abstract
This research was conducted to determine the effect of increasing temperature on the compressive strength of geopolymer concrete. The specimens used in this study is cylindrical concrete with a diameter of 150 mm and a height of 300 mm and the design compressive strength, f'c is 30 MPa. The variable in this study was the molarity of the NaOH solution in the geopolymer with variations of 4M, 6M, and 8M. Before the compressive strength test, some of the specimens were burned at a temperature of 10000C. In this study, some of the specimens are coated with fire-retardant additives on its surface. The results of this study indicate that the 8M NaoH geopolymer concrete with fire-retardant coating shows highest residual compressive strength at 54.7 %. It can be stated that the molarity value of NaOH and fireretardant additive coating will be able to provide geopolymer concrete structure resistance to elevated temperature due to fire accident.
Publication Details
Page(s) 386-391
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 4, Year: 2022

Request the full text from PASTIC

Keywords
geopolymer, Temperature, molarity, concrete, Fire-retardant
References
Mantelan V. .2019 .kebakaran-di-jakarta-melonjak-empat-bulanterakhir.. , : .
Paat Y.,- Y. .2020 .. , : .
Arioz O. .2007 .Effect of Elevated Temperature on Properties of Concrete. Fire Safety Journal, 01(8) : 516-522.
Neville A.M.,Brooks J.J. .2002 .. , : .
Demirboga R.,I. Turkmen R.,Karakoc M.B. .2005 .Thermo-Mechanical Properties of Concrete Containing High Volume Mineral Admixtures. Building and Environment Journal, 08(1) : 349-354.
Luhar Salmabanu,Luhar Ismail .2021 .. , : .
Concrete . .An Overview. MDPI Journal, 11 : .
Temuujin J,Minijigmaa A,Rickard W .2010 .Fly ash based geopolymer thincoating on metal substrates and its ther-mal evaluation. J Hazard Mater, 180 : 748-752.
Sarker PK .2011 .Bond strength of reinforcingsteel embedded in fly ash geopolymerconcrete. Mater Struct, 44(5) : 1021-1030.
Zanotti C,Borges PHR,Bhutta A . .Bond strength of PVA fibre reinforcedgeopolymer repair to Portland cementconcrete substrate. , : .
Tan Z. .2012 .Concrete Made Slag Improve Resistance to Fire Damage. , : 161-193.
Adefemi A.,U.M.B. Kebbi S.S. Olugbenga S. .2013 .Effect of Admixture on Fire Resistance of Ordinary Portland Cement Concrete. Civil and Environmental Research, 3(1) : 105-114.
Hardjasaputra H.,Cornelia M.,Gunawan Y.,Surjaputra I.V.,Lie H.A.,Ng Pranata .2019 .Study of Mechanical Properties of Fly AshBased Geopolymer Concrete. Proceeding 7th International Conference on Euro Asia Civil Engineering Forum, : 1757.
Hardjasaputra H.,Widjajakusuma J.,Cornelia M. .2017 .. Structural Concrete Technology Based on 100% Fly ash - Geopolymer Concrete. Competency Based Research Report, : .
Davidovits J. .1994 .. , : .
.2003 .Fire-resistant Geopolymer Produce by Granulated Blast Furnace Slag. Minerals Engineering Journal, 6875(03) : 00008-6.
.2019 .Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. [17] ASTM C618-19, : .
.2018 .Standard Specification for Concrete Aggregates. [18] ASTM C33 / C33M-18, : .
.2000 .Mixture Selection Procedure for Normal Concrete. [19] SNI 7657, : .
.2020 .Standard Test Methods for Fire Tests of Building Construction and Materials. [20] ASTM E119-20, : .
.2021 .Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. [21] ASTM C39 / C39M-21, : .
0

Citations

0

Downloads

9

Views