No Detail Found!

Influence of tool coatings and drilling parameters on the quality of drilling in nano metal matrix composites

Author(s)
Senthil Babu S. Department of Mechanical Engineering, VELS Institute of Science, Technology and Advanced Studies,Chennai,India
Dhanasekaran C. Department of Mechanical Engineering, VELS Institute of Science, Technology and Advanced Studies,Chennai,India
Abstract
In Assembly operations, drilling a machine component, made of nano metal matrix composite material, without any defect is a challenging task for Engineers. This work is focused on the effect of tool coatings and drilling parameters on the quality of holes made on Hybrid Aluminium nano-composite. In this work, stir cast hybrid nanocomposite is developed with the reinforcement of 2% of boron nitride and 4% of Aluminium oxide nano particles in the base matrix of Aluminium 7075. This composite is used in various load bearing applications due to their excellent wear resisting properties. Circularity error and poor surface finish of the drilled holes are the major problems encountered in the drilling process. To improve the quality of drilling, it is essential to study these responses under various drilling conditions by varying the drilling parameters and drill tool coatings. The primary aim is to optimise the drilling parameters involved to minimise the circularity error and to maximise the surface finish of the drilled holes. Drilling experiments are conducted in CNC vertical machining centre using three different drill tools (Uncoated carbide drill, TiAlN coated drill and High carbon coated drill) of 5mm diameter. The different drilling parameters considered in our study are drilling speed and feed rate. L27 orthogonal array is used to conduct the experiments followed by Taguchi analysis and ANOVA to find out optimum process parameters and their percentage contribution on the responses considered.
Publication Details
Page(s) 153-159
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 2, Year: 2022

Request the full text from PASTIC

Keywords
Taguchi technique, hybrid nanocomposites, Drilling, surface roughness, circularity error, ANOVA
References
Rubi C. S.,Prakash J. U. .2020 .Drilling of Hybrid Aluminum Matrix Composites using Grey-Taguchi Method. INCAS Bulletin, 12(1) : .
Murthy B. R. N.,Rodrigues L. L. .2013 .Analysis and Optimization of Surface Roughness in GFRP Drilling Through Integration of Taguchi and Response Surface Methodology. Research Journal of Engineering Sciences. 2, (5) : 1-8.
Verma R. K.,Singh V. K.,Singh D. K.,Kharwar P. K. .2021 .Experimental investigation on surface roughness and circularity error during drilling of polymer nanocomposites. Materials Today: Proceedings. 44, : 2501-2506.
Venkateshwarlu N.,Singaravel B.,Shekar K. C.,Prasad S. D. .2021 .February. Analysis and optimization of circularity error in drilling Process using statistical technique. In IOP Conference Series: Materials Science and Engineering, 1057(1) : 012063.
Ramkumar T.,Selvakumar M.,Mohanraj M.,Chandrasekar P. M. .2019 .Experimental investigation and analysis of drilling parameters of metal matrix (Ti/TiB) composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(1) : 1-12.
Raja K.,Sekar V. C.,Kumar V. V.,Ramkumar T.,Ganeshan P. .2020 .Microstructure characterization and performance evaluation on AA7075 metal matrix composites using RSM technique. Arabian Journal for Science and Engineering, 45(11) : 9481-9495.
Singh H.,Kamboj A.,Kumar S.,Engineering Metallurgical .2014 .Multi response optimization in drilling Al6063/SiC/15% metal matrix composite. Int. J. of Chemical, 8(4) : .
Juliyana S. J.,Prakash J. U. .2020 .Drilling parameter optimization of metal matrix composites (LM5/ZrO2) using Taguchi Technique. Materials Today: Proceedings. 33, : 3046-3050.
Rajkumar Eaben,Palanikumar S.,Pitchandi K.,Latha K.,B. K. .2020 .Subsurface integrity studies on the drilling of Al/B4C/mica hybrid metal matrix composites. Materials and Manufacturing Processes, 35(1) : 52-60.
Abbas C. A.,Huang C.,Wang J.,Liu Z.,Zhu H.,H. H. .2020 .Machinability investigations on highspeed drilling of aluminum reinforced with silicon carbide metal matrix composites. The International Journal of Advanced Manufacturing Technology, 108 : 1601-1611.
Taskesen A.,Kutukde K. .2013 .Analysis and optimization of drilling parameters for tool wear and hole dimensional accuracy in B4C reinforced Alalloy. Transactions of Nonferrous Metals Society of China, 23(9) : 2524-2536.
Kannan C.,Ramanujam R.,Balan A. S. S. .2018 .Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments. Materials and Manufacturing Processes, 33(5) : 587-595.
Senthil Babu S.,Vinayagam B. K. .2016 .Influence of Various Parameters on The Hole Quality in Drilling of Aluminium Based Hybrid Composites. ARPN Journal of Engineering and Applied Sciences, 11(24) : .
Rubi C. S.,Prakash J. U. .2020 .Analysis of Surface Roughness and Burr Height in Drilling of Aluminium Matrix Composites using Taguchi Technique. INCAS Bulletin, 12(2) : 173-182.
Babu S. S.,Dhanasekaran C. .2021 .Mathematical Analysis of Process Parameters in Drilling of Various Aluminium Matrix Composites Using TOPSIS. In IOP Conference Series: Materials Science and Engineering, 1126(1) : 012023.
0

Citations

0

Downloads

9

Views