No Detail Found!

Tensile, macrographic and fractographic examinations of friction stir spot welded Lap joints of AA5083-H116

Author(s)
Omolayo M. Ikumapayi Department of Mechanical and Mechatronics Engineering, Afe Babalola University,Ado Ekiti,Nigeria
Esther T. Akinlabi Pan African University for Life and Earth Sciences Institute (PAULESI), Ibadan, Nigeria; Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
Ayuba S. Osinubi Department of Mechanical Engineering Science, University of Johannesburg,Johannesburg,South Africa
Abegunde O. Olayinka Material Science, Energy and Nanoengineering, Mohammed VI Polytechnic University,,Morocco
Olawale S. Fatoba Department of Mechanical Engineering Science, University of Johannesburg,Johannesburg,South Africa
Stephen A. Akinlabi Department of Mechanical Engineering, Butterworth Campus, Walter Sisulu University, South Africa
Abstract
Failure of welded materials in lap configuration due to poor adhesion bond or shear strength can lead to catastrophic damage to life and properties. Due to exponential demands for joined or welded components in lap configuration mode, it has become imperative to investigate and understand how a solid state joining process parameter can affect joint efficiency. Thus, this research study focuses on the effect of rotational speed and dwell time on the mechanical properties and the failure mode. Friction stir spot welding was used for the welding process. Three rotational speeds of 600, 900 and 1200 rpm and three dwell times of 5, 10 and 15 secs were used for the welding process. From the mechanical testing of the tensile shear strength, it was noticed that the magnitude of the tensile shear strength (TSS), tensile yield strength (TYS) and the fracture force (F.F.) depend on the choice of the rotational speed and dwell time. The maximum shear strength was found at the mid-rotational speed of 900 rpm. Ductile failure mode was noticed for all the samples during the fractography observations. Visual observation of the keyhole defects revealed that the diameter and depth of the keyhole were influenced by the process parameters, which also impacts the weld integrity and quality.
Publication Details
Page(s) 139-152
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 2, Year: 2022

Request the full text from PASTIC

Keywords
fracture force, tensile shear strength, friction stir spot welding, tensile yield strength, aluminium alloy
References
Mubiayi M. P.,Akinlabi E. T. .2015 .An overview Onfriction stir spot welding of dissimilar materials. Transactions on Engineering Technologies, : 537-549.
Ikumapayi O. M.,Akinlabi E. T. .2019 .Recent advances in keyhole defects repairs via refilling friction stir spot welding. Materials Today: Proceedings, 18 : 2201-2208.
Li M.,Zhang C.,Wang D.,Zhou L.,Wellmann D.,Tian Y. .2020 .Friction stir spot welding of aluminum and copper: A review. Materials, 13 : 156.
Sridharan N.,Isheim D.,Seidman D. N.,Babu S. S. .2017 .Colossal super saturation of oxygen at the iron-aluminum interfaces fabricated using solid state welding. Scr. Mater, 130 : 196-199.
Nassiri A.,Abke T.,Daehn G. .2019 .Investigation of melting phenomena in solid-state welding processes. Scr. Mater, 168 : 61-66.
Masaki O.,Yuichiro T.,Katashi M.,Toshiaki Y.,Masahiro F. .2015 .Fatigue behaviour of aluminium alloy/steel joints by spot friction stirring. Welding International, 29 : 96-102.
Gerlich A.,Su P.,North T. .2005 .Tool penetration during friction stir spot welding of Al and Mg alloys. J. Mater. Sci, 40 : 6473-6481.
Shen Z.,Ding Y.,Gerlich A. P. .2020 .Advances in friction stir spot welding. Critical Reviews in Solid State and Materials Sciences, 45 : 457-534.
Alexopoulos N. D.,Gialos A. A.,Zeimpekis V.,Velonaki Z.,Kashaev N.,Riekehr S.,Karanika A. .2016 .Laser beam welded structures for a regional aircraft: weight, cost and carbon footprint savings. J. Manuf. Syst, 39 : 38-52.
Kumar A.,Singh R.,Singh I. .2017 .A review of metal inert gas welding on aluminium alloys. International Journal of Engineering Sciences & Research Technology, 6 : 453-456.
Prasad N. E.,Wanhill R. J.,Technologies Material .2017 .. , : .
Tamasgavabari R.,Ebrahimi A. R.,Abbasi S. M.,Yazdipour A. R. .2018 .The effect of harmonic vibration with a frequency below the resonant range on the mechanical properties of AA-5083-H321 aluminum alloy GMAW welded parts. Materials Science and Engineering: A, 736 : 248-257.
Zhu C.,Cheon J.,Tang X.,Na S.,Cui H. .2018 .Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Alalloy. Int. J. Heat Mass Transfer, 126 : 1206-1221.
Abegunde O. O.,Akinlabi E. T.,Madyira D. .2017 .Microstructural Evolution and Mechanical Characterizations of AL-TiC Matrix Composites Produced via Friction Stir Welding. , 51 : 297-306.
Abegunde O. O.,Akinlabi E. T.,Madyira D. M. .2015 .Microstructural characterization of friction stir lap welds of aluminium incorporated with titanium carbide. , : .
Su Y.,Hua X.,Wu Y. .2013 .Effect of input current modes on intermetallic layer and mechanical property of aluminum-steel lap joint obtained by gas metal arc welding. Materials Science and Engineering: A, 578 : 340-345.
Qiu R.,Shi H.,Zhang K.,Tu Y.,Iwamoto C.,Satonaka S. .2010 .Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding. Mater Charact, 61 : 684-688.
Zhang Y.,Li Y.,Luo Z.,Yuan T.,Bi J.,Wang Z. M.,Wang Z. P.,Chao Y. J. .2016 .. , : .
Peng H.,Chen D.,Bai X.,She X.,Li D.,Jiang X. .2019 .Ultrasonic spot welding of magnesium-toaluminum alloys with a copper interlayer: Microstructural evolution and tensile properties. Journal of Manufacturing Processes, 37 : 91-100.
Mirza F.,Macwan A.,Bhole S.,Chen D.,Chen X. .2017 .Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets. Materials Science and Engineering: A, 690 : 323-336.
Bozkurt Y.,Salman S.,Çam G. .2013 .Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded A.A. Science and Technology of Welding and Joining, 18 : 337-345.
Kulekci M. .2014 .Effects of process parameters on tensile shear strength of friction stir spot welded aluminium alloy (EN AW 5005). Archives of Metallurgy and Materials, 59 : .
Aydın H.,Bayram A.,Uğuz A.,Akay K. S. .2009 .Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state. Mater Des, 30 : 2211-2221.
Trueba L.,Heredia G.,Rybicki D.,Johannes L. B.,Mater L. B. .2015 .Effect of tool shoulder features on defects and tensile properties of friction stir welded aluminum 6061-T6. , 219 : 271-277.
Kucharczyk P.,Madia M.,Zerbst U.,Schork B.,Gerwien P.,Münstermann S. .2018 .Fracturemechanics based prediction of the fatigue strength of weldments. Material aspects. Eng. Fract. Mech, 198 : 79-102.
Guo Y.,Wang F. .2019 .Dynamic fracture properties of 2024-T3 and 7075-T6 aluminum friction stir welded joints with different welding parameters. Theor. Appl. Fract. Mech, 104 : 102372.
Jonckheere C.,Cassiers C.,Delhaye M.,Simar A. .2012 .Fracture and mechanical properties of friction stir spot welds in 6063-T6 aluminum alloy. The International Journal of Advanced Manufacturing Technology, 62 : 569-575.
Ikumapayi O.,Akinlabi E.,Sharma A.,Sharma V.,Oladijo O. .2020 .Tribological, structural and mechanical characteristics of friction stir processed aluminium-based matrix composites reinforced with stainless steel micro-particles. Engineering Solid Mechanics, 8 : 253-270.
0

Citations

0

Downloads

7

Views