No Detail Found!

Mechanical properties of sandwich laminates composite on plywood and glass fibers

Author(s)
S.A. Shamsudin Fakulti Teknologi Kejuruteraan Mekanikaldan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
K.B. Hamzah Fakulti Teknologi Kejuruteraan Mekanikaldan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
N. Ab Wahab Fakulti Teknologi Kejuruteraan Mekanikaldan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
M. Nuzaimah Fakulti Teknologi Kejuruteraan Mekanikaldan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
S.K. Sayed Nordin Fakulti Teknologi Kejuruteraan Mekanikaldan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,Durian Tunggal, Melaka,Malaysia
Abstract
The reinforcement of solid wood and wood-based composite materials is not a new idea, but there have been very few studies about reinforcing plywood with glass fiber composite. In this study, woven glass fibers were used on both outer surfaces of plywood sandwich laminates composite with the help of epoxy resin to improve mechanical properties of standard plywood laminated. The vacuum bagging technique was applied to fabricate plywood sandwich laminate composite test samples with three different thicknesses which is 3 mm, 5 mm and 9 mm, and their mechanical properties were analyzed using tensile and surface roughness tests for different cutting speed parameters of laser cut machine. The collected data were analyzed using analysis of variance (ANOVA), and the microscopic investigation was performed to examine the cross-section structure of ruptured surfaces and its failure morphology during cutting process.
Publication Details
Page(s) 178-185
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 2, Year: 2022

Request the full text from PASTIC

Keywords
Mechanical properties, laser cut machine, Glass fiber, plywood
References
Sankar A.,Sajan S. .2021 .Manufacturing of high strength plywood composites reinforced with copper fibers. Materials Today: Proceedings., : .
Saka S.,Ueno T. .1997 .Several SiO 2 woodinorganic composites and their fire-resisting properties. Wood science and technology, 31(6) : 457-466.
Li Y.,Dong X.,Liu Y.,Li J. and Wang F. .2011 .Improvement of decay resistance of wood via combination treatment on wood cell wall: Swellbonding with maleic anhydride and graft copolymerization with glycidyl methacrylate and methyl methacrylate. International Biodeterioration and Biodegradation, 65(7) : 1087-1094.
Bekhta P.,Salca E.A.,Lunguleasa A. .2020 .Some properties of plywood panels manufactured from combinations of thermally densified and nondensified veneers of different thicknesses in one structure. Journal of Building Engineering, 29 : 101116.
Aydin I.,Colakoglu G.,Colak S.,Demirkir C. .2006 .Effects of moisture content on formaldehyde emission and mechanical properties of plywood. Building and environment. , 41(10) : 1311-1316.
Bekhta P.,Hiziroglu S.,Shepelyuk O. .2009 .Properties of plywood manufactured from compressed veneer as building material. Materials and Design, 30(4) : 947-953.
Choi S.W.,Li M.,Lee W.I.,Kim H.S. .2014 .Analysis of buckling load of glass fiber/epoxyreinforced plywood and its temperature dependence. Journal of Composite Materials, 48(18) : 2191-2206.
Yuan Q.,Lu K.,Fu F. .2014 .Process and structure of electromagnetic shielding plywood composite laminated with carbon fiber paper. The Open Materials Science Journal, 8(1) : 99-107.
Bal B.C.,Bektaş İ.,Mengeloğlu F.,Karakuş K.,Demir H.,Ö H. .2015 .Some technological properties of poplar plywood panels reinforced with glass fiber fabric. Construction and Building Materials, 101 : 952-957.
Liu Y.,Guan M. .2019 .Selected physical, mechanical, and insulation properties of carbon fiber fabric-reinforced composite plywood for carriage floors. European Journal of Wood and Wood Products, 77(6) : 995-1007.
Auriga R.,Gumowska A.,Szymanowski K.,Wronka A.,Robles E.,Ocipka P.,Kowaluk G. .2020 .Performance properties of plywood composites reinforced with carbon fibers. Composite Structures, 248 : 112533.
Sekhar R.,Singh T.P. .2015 .Mechanisms in turning of metal matrix composites: a review. Journal of Materials Research and Technology, 4(2) : 197-207.
Ramesh M.,Palanikumar K.,Reddy K.H. .2014 .Experimental investigation and analysis of machining characteristics in drilling hybrid glasssisal-jute fiber reinforced polymer composites. In 5th international and 26th all India manufacturing technology, design and research conference AIMTDR., : .
Salur E.,Aslan A.,Kuntoglu M.,Gunes A.,Sahin O.S. .2019 .Experimental study and analysis of machinability characteristics of metal matrix composites during drilling. Composites Part B: Engineering, 166 : 401-413.
Maneiah D.,Shunmugasundaram M.,Reddy A.R.,Begum Z. A.R. .2020 .Optimization of machining parameters for surface roughness during abrasive water jet machining of aluminium/magnesium hybrid metal matrix composites. Materials Today: Proceedings. 27, : 1293-1298.
John R.,Lin R.,Jayaraman K.,Bhattacharyya D. .2021 .Effects of machining parameters on surface quality of composites reinforced with natural fibers. Materials and Manufacturing Processes, 36(1) : 73-83.
0

Citations

0

Downloads

9

Views