No Detail Found!

Application of neutron induced fission technique in the determination of uranium in drinking water.

Author(s)
M. Akram Physics Research Division, PINSTECH, Islamabad, Pakistan
N. U. Khattak Physics Research Division, PINSTECH, Islamabad, Pakistan
A. Iqbal Physics Research Division, PINSTECH, Islamabad, Pakistan
A. A. Qureshi Physics Department, University of Azad Jammu and Kashmir, Muzaffarabad, AJK, Pakistan
Kafyatullah Physics Department, University of Azad Jammu and Kashmir, Muzaffarabad, AJK, Pakistan
I. E. Qureshi Physics Department, University of Azad Jammu and Kashmir, Muzaffarabad, AJK, Pakistan
Abstract
The Neutron induced Fission Technique has been applied to determine uranium concentration in drinking water samples collected from natural springs of Reshian area, Azad Kashmir. The technique involves the simultaneous irradiation of unknown and known specimens, fixed on a track detector, with thermal neutrons and the development of fission tracks from the nuclear reaction 235U (n,f). The tracks produced in the detector during irradiation are then counted after chemical etching. Uranium concentrations in drinking water samples are determined by comparing its fission trace density with that of standard of known uranium concentration. Uranium concentration in water samples from the study area has been found to vary from 0.03 ± 0.01 mgL-1 to 6.67 ± 0.14 mgL-1 with an average values of 1.57 ± 0.06 mgL-1. The concentrations of uranium in drinking water are found to be less than the maximum acceptable concentration levels of 9-30 mgL-1. The drinking water from the reported area has been found to be within safe limits as far as uranium related health hazards are concerned.
Publication Details
Page(s) 1-6
DOI DOI not available
Published Journal: Nucleus, Volume: 40, Issue: 1--4, Year: 2003

Request the full text from PASTIC

0

Citations

0

Downloads

50

Views