No Detail Found!

Experimental Evaluation and Predictive Modelling of Biopolymer- Based Drilling Fluids under Simulated HPHT Conditions

Author(s)
Zohaib Ahmed Institute of Petroleum & Natural Gas Engineering, MUET Jamshoro, Pakistan
Hassan Afzal Institute of Petroleum & Natural Gas Engineering, MUET Jamshoro, Pakistan
Muhammad Zaryab Institute of Petroleum & Natural Gas Engineering, MUET Jamshoro, Pakistan
Abstract
Drilling fluids used in HPHT wells often lose rheology and fail to control fluid loss due to thermal degradation of conventional additives. This study evaluates Okra mucilage, a locally available biopolymer in Pakistan, tested individually and in blend with Xanthan Gum, to determine whether these systems can improve thermal stability, rheology, and filtration under HPHT conditions. Four drilling fluid systems were prepared: base mud, Okra-based, Xanthan-based, and an Okra- Xanthan blend. Laboratory tests were conducted up to 120°C to measure plastic viscosity, yield point, gel strength, and fluid loss, followed by thermal aging in an oven. Empirical correlations, including Arrhenius degradation and viscositytemperature relationships, were applied to predict high-temperature performance beyond laboratory limits. Comparative analysis was performed to assess differences between single-biopolymer and blended formulations. Okra-based fluids exhibited improved rheological and filtration behavior over base mud, with plastic viscosity increasing from 10.5 cP to 11.4 cP and yield point from 4.28 to 6.1 lb/100ft². Fluid loss decreased by 8-12% with reduced filter cake thickness. The Okra-Xanthan blend further enhanced thermal stability, improving the YP/PV ratios from 0.40 to 0.50. Predictive modelling showed the blended system retaining over 70% of its viscosity at 200-220 °C. These outcomes indicate that Okra-based formulations can maintain functional stability under simulated HPHT conditions while utilizing low-cost local materials. This study introduces Okra mucilage as a sustainable, locally sourced drilling fluid additive suitable for HPHT environments. The combined use of Okra and Xanthan Gum demonstrated a cost-effective, environmentally friendly approach to strengthening drilling fluid design while supporting both thermal resilience and operational reliability
Publication Details
Page(s) 1-1
DOI DOI not available
Published Journal: SPI-2026: Abstract book on 7th International Conference on Sustainability in Process Industry (SPI-2026), February 9-10, 2026, Volume: 1, Issue: 1, Year: 2026

Request the full text from PASTIC

Keywords
thermal stability, Okra Mucilage, Keywords: HPHT drilling fluids
0

Citations

0

Downloads

7

Views