The industrial wastewater is extremely difficult to treat due to its complex content of suspended sediments, colloids, natural organic materials, colors, heavy metals, and resistant chemical contaminants. Coagulation-flocculation is a prevalent primary treatment method because it can destabilize colloids and aggregate fine particles, which reduces turbidity significantly. Membrane filtering systems, in particular ceramic membranes, have better chemical resistance, longer lifetime, and higher separation efficiency. In this regard, the coagulation-flocculation process integrated with fluidized ceramic membrane filtration becomes one of the effective hybrid methods to obtain high-quality effluents, thus minimizing membrane fouling. This work assesses the overall efficiency of the coagulation- flocculation pre-treatment followed by fluidized ceramic membrane filtration for treating real industrial wastewater collected from an industrial manufacturing plant. The performance of the succeeding membrane filtering step was greatly enhanced by optimized coagulation-flocculation. Pre-coagulation reduced turbidity, TSS, and colloidal fractions, which then resulted in the reduction of membrane fouling rate by 40-60%. The fluidized ceramic membrane system also showed remarkable removal efficiencies for residual turbidity (>99%), COD (70- 90%), color (80-95%), and heavy metals such as Fe, Pb, and Ni.To maintain a constant flux during operation and reduce the need for periodic chemical cleaning, the fluidization mechanism generated uniform abrasive action on the surface of the membrane. SEM and FTIR analyses of membrane surfaces revealed a diminished cake layer deposition and insignificant blockage of membrane pores upon the administration of coagulation prior to filtering. Sludge generated during the coagulation process showed acceptable settling characteristics and was easily separable, thus enhancing efficient solid-liquid separation prior to membrane filtration This hybrid approach offers better removal of pollutants, higher flux, lower tendency to foul, and reduced operational cost compared to individual treatment systems. Their potential for large-scale industrial applications where reliable processes and high-quality effluents are considered vital is revealed.