No Detail Found!

The effect of fixed external shading devices on daylighting and thermal comfort in residential building

Author(s)
Aliakbar Heidari Department of technical and engineering, yasouj university,Yasouj,Iran
Malihe Taghipour Department of Architecture, shiraz Branch, Islamic Azad university,shiraz,Iran
Zahra Yarmahmoodi Department of Architecture, shiraz Branch, Islamic Azad university,shiraz,Iran
Abstract
Building shading devices can improve the thermal comfort in indoor environment, and also reduce cooling and heating energy consumption in dry and hot climate. This study proposes the different kind of window's fixed shading devices for energy consumption under near-extreme summer and winter conditions by conducting residential building energy simulations in Shiraz climate. Which fixed shading devices optimal configurations that give maximum energy consumption can be used in Shiraz climate. The study was based on modeling-simulation experiments where Ecotect models resented the actual building energy with and without shading devices to reducing heating and cooling load and peak consumption. The results obtained confirmed the accuracy of the model and the suitability of (horizontal, eggcrate and geometrical) of shading devices in reducing the solar gains in summer with reduced blocking of solar radiation in winter. In all cases it has been proven that excessive obstruction may yield an excessive reduction in a range of illuminances between 500 and 2000 lux, increasing lighting energy consumption. At the end results showed that horizontal, geometrical and eggcrate have the best function according to reduce energy and have enough day lighting in the zones in shiraz climate.
Publication Details
Page(s) 165-180
Published Journal: Journal of Daylighting, Volume: 8, Issue: 2, Year: 2021

Request the full text from PASTIC

Keywords
Thermal analysis, Daylight simulation, Fixed shading devices, Residential building
References
Hamed R. E. D. .2018 .Harmonization between architectural identity and energy efficiency in residential sector (case of North-West coast of Egypt). Ain Shams Engineering Journal, 9 : 2701-2708.
K.M. Aldali W.S.,Moustafa W.S. .2016 .An attempt to achieve efficient energy design for High-Income Houses in Egypt. International Journal of Sustainable Built Environment, 5 : 334-344.
Faizi F.,Noorani M.,Ghaedi A.,Mahdavinejad M. .2011 .Design an optimum pattern of orientation in residential complexes by analyzing the level of energy consumption (case study: Maskan Mehr Complexes. Procedia Engineering, 21 : 1179-1187.
Noroozian N. .2016 .Localization pattern for assessment of energy efficiency in buildings in Tehran, Naqshejahan-Basic studies and New Technologies of Architecture and Planning 6(3) (. , : 63-74.
Vassiliades C.,Michael A.,Savvides A.,Kalogirou S. .2018 .Improvement of passive behaviour of existing buildings through the integration of active solar energy systems. Energy, 163 : 1178-1192.
Knudsen M.,Petersen S. .2020 .Economic model predictive control of space heating and dynamic solar shading. Energy and Buildings, 209 : 109661.
Hong S.,Choi A.,Sung M. .2018 .Impact of bi-directional PV blind control method on lighting, heating and cooling energy consumption in mock-up rooms. Energy and Buildings, 176 : 1-16.
Yao J.,Chow D.H.C.,Chi Y. W. .2016 .Impact of manually controlled solar shades on indoor visual comfort. Sustainability, 8(8) : 727.
Aldawoud A. .2013 .Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate. Energy and Buildings, 59 : 104-110.
Omar Elshiwihy S.,Nasarullah Chaudhry H. .2019 .Parametric Study on Determining Optimum Shading Techniques for Urban High-Rise Dwellings. Urban Science, 3(3) : 85.
Li S.,Liu L.,Peng C. .2020 .A Review of Performance-Oriented Architectural Design and Optimization in the Context of Sustainability: Dividends and Challenges. Sustainability, 12 : 1427.
Onazi O.,Gaiya N. S.,Ola-Adisa E. O.,Yilme D. G. .2018 .An appraisal of shading devices in institutional buildings. Journal of Physical Science and Innovation, 10 : 17-31.
H. J. Kim C. S.,Yang H. J.,Moon A .2019 .Study on Multi-Objective Parametric Design Tool for Surround-Type Movable Shading Device. Sustainability, 11 : 7096.
Palmero A.,Oliveira A. .2010 .Effect of louver shading devices on building energy requirements. Applied Energy, 87 : 2040-2049.
Nedhal A. T.,Syed S.,Fadzil S. .2011 .The Potential of Shading Devices for Temperature Reduction in High-Rise Residential Buildings in the Tropics. Procedia Engineering, 21 : 273-282.
Jaber S.,Ajib S. .2011 .Optimum, technical and energy efficiency design of residential building in Mediterranean region. Energy and Buildings, 43(8) : 1829-1834.
Kim G.,Lim H. S.,Lim T. S.,Schaefer L.,Kim J. T. .2012 .Comparative advantage of an exterior shading device in thermal performance for residential buildings. Energy and buildings 46, : 105-111.
Saelens D.,Parys W.,Roofthooft J.,T. De la Torre J. .2014 .Reprint of "Assessment of approaches for modeling louver shading devices in building energy simulation programs". Energy and Buildings, 60 : 286-297.
Cho J.,Yoo C.,Kim Y. .2014 .Viability of exterior shading devices for highrise residential buildings: Case study for cooling energy saving and economic feasibility analysis. Energy and Buildings, 82 : 771-785.
Raheem A.A.,Issa R.R.,Olbina S. .2014 .Solar transmittance analysis of different types of sunshades in the Florida climate. in Building Simulation, : .
Stazi F.,Marinelli S.,Di Perna C.,Munafò P. .2014 .Comparison on solar shadings: Monitoring of the thermo-physical behaviour, assessment of the energy saving, thermal comfort, natural lighting and environmental impact. Solar Energy, 105 : 512-528.
Hashemi A. .2014 .Daylighting and solar shading performances of an innovative automated reflective louvre system. Energy and Buildings, 82 : 607-620.
Chen Y.,Pei J.,Cao X.,Chen Q.,Jiang Y. .2014 .Experimental and simulation study on the performance of daylighting in an industrial building and its energy saving potential. Energy and Buildings, 73 : 184-191.
Nikoofard S.,Ugursal V.I.,Beausoleil-Morrison and I. .2014 .Technoeconomic assessment of the impact of window shading retrofits on the heating and cooling energy consumption and GHG emissions of the Canadian housing stock. Energy and Buildings, 69 : 354-366.
Valladares-Rendón L.,Lo S. L. .2014 .Passive shading strategies to reduce outdoor insolation and indoor cooling loads by using overhang devices on a building. in Building Simulation, : .
Denan Z.,Abdul Majid N.H.,Arifin N.,Environment-Behaviour Studies .2015 .Ingenious Malay wood carving as daylight filtering devices. , 201 : 182-190.
P. M. Esquivias C. M.,Munoz I.,Acosta D.,Moreno J.,Navarro J. .2016 .Climate-based daylight analysis of fixed shading devices in an open-plan office. Lighting Research & Technology, 48(2) : 205-220.
Krstić-Furundžić A.,Kosić T. .2016 .Assessment of energy and environmental performance of office building models: A case study. Energy and buildings 115, : 11-22.
Li X.,Duarte F.,Ratti C.,Planning B: Urban Analytics and City Science C. .2019 .Analyzing the obstruction effects of obstacles on light pollution caused by street lighting. , : 216-230.
Stamatakis A.,Mandalaki M.,Tsoutsos T. .2016 ., Multi-criteria analysis for PV integrated in shading devices for Mediterranean region. Energy and Buildings, 117 : 128-137.
F.D. Miran H.,Abdullah H. .2016 .Evaluation of the Optimal Solar Shading Devices for Enhancing Daylight Performance of School Building. A case study of semi-arid climate-Erbil city). ZANCO J. Pure Appl. Sci, 28 : 580-598.
Khoroshiltseva M.,Slanzi D.,Poli and I. .2016 .A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices. Applied Energy, 184 : 1400-1410.
A. K. K. Lau E.,Salleh C. H.,Lim M. Y.,Sulaiman M. Y. .2016 .Potential of Shading Devices and Glazing Configurations on Cooling Energy Savings for High-rise Office Buildings in Hot-humid Climates: The Case of Malaysia. International Journal of Sustainable Built Environment, 5 : .
Kim M.,Leigh S. B.,Kim T.,Cho S.,A S. .2015 .Study on External Shading Devices for Reducing Cooling Loads and Improving Daylighting in Office Buildings. Journal of Asian Architecture and Building Engineering, 14 : 687-694.
Dutta A.,Samanta A.,Neogi S. .2017 .Influence of orientation and the impact of external window shading on building thermal performance in tropical climate. Energy and Buildings, 139 : 680-689.
Qing L. I.,Run G. A. O.,Bo J. I. A. N. G.,Shiming W. A. N. G. .2017 .. Sunshade Device Simulation Analysis and Optimization Design, 174 : 1196-1201.
Anand P.,Deb C.,Alur R. .2017 .A simplified tool for building layout design based on thermalcomfort simulations. Front, Archit. Res, 6(2) : 218-230.
Dabe T.,Adane V. .2018 .The impact of building profiles on the performance of daylight and indoor temperatures in low-rise residential building for the hot and dry climatic zones. Building and Environment, 140 : 173-183.
Kirankumar G.,Saboor S.,Setty P. R. T.,Babu A. .2018 .Effect of Various External Shading Devices on Windows for Minimum Heat Gain and Adequate Day lighting into Buildings of Hot and Dry Climatic Zone in India. EDP Sciences, : .
Alhuwayil W.,Mujeebu M. Abdul,Algarny A. .2018 .Impact of External Shading Strategy on Energy Performance of Multi-Story Hotel Building in Hot-humid Climate. Energy, 169 : 1166-1174.
.2019 .. Energy and Buildings, 190 : 202-215.
Liu S.,Kwok Y. T.,K. K. L. Lau P. W.,Chan and E.,Ng and E. .2019 .Investigating the energy saving potential of applying shading panels on opaque façades: A case study for residential buildings in Hong Kong. Energy and Buildings, 193 : 78-91.
Domínguez-Delgado .2019 .Numerical and experimental validation of the solar radiation transfer for an egg-crate shading device under Mediterranean climate conditions. Solar Energy, 183 : 755-767.
Sadeghia R.,Amininezhad K.,Yarahmadi D.,Tajikd S. .2019 .Sidefins Shading Patterns on Energy Consumption in an Office Building. 13th International conference on Engineering and Technology, : .
Rashid M.,Jalil A.,Gulzar S.,Malik A.M.,Technology (UET) Taxila A.M. .2019 .The Efficacy of Shading Design in Commercial Buildings in The Semi-arid Climate of Lahore; Focusing on The Geometry of Horizontal Shade. Technical Journal, 24 : .
Al-Saggaf A.,Nasir H.,Taha M. .2020 .Quantitative approach for evaluating the building design features impact on cooling energy consumption in hot climates. Energy and Buildings, 211 : 65-88.
Sghiouri H.,Charai M.,Mezrhab A.,Karkri M. .2020 .Comparison of passive cooling techniques in reducing overheating of clay-straw building in semiarid climate. in Building Simulation, : .
Maile T.,Fischer M.,Bazjanac V. .2007 .Building energy performance simulation tools-a life-cycle and interoperable perspective, Center for Integrated Facility Engineering (CIFE) Working Paper 107 (. , : 1-49.
0

Citations

0

Downloads

11

Views