No Detail Found!

Ballistic impact response of fibre metal laminates based on ramie fibre woven reinforced polyester

Author(s)
Muhammad Syaiful Fadly Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Mustafa Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Jumaddil Hair Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Bakri Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Sri Chandrabakty Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Khairil Anwar Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Muhammad Sadat Hamzah Department of Mechanical Engineering, Faculty of Engineering,Universitas Tadulako, Palu,Indonesia
Abstract
This research focused on evaluating the ballistic impact behavior of polyester-reinforced woven ramie fibers combined with aluminum fiber metal laminates (FMLs). The materials were structured in four specific configurations: two types of ramie composites (2-layer and 3-layer) and two FML configurations FML 2/2 and FML 2/3. Ballistic performance was assessed through both experimental and numerical testing under a controlled firing angle of 90 degrees with 9 mm projectiles. The findings clearly showed that the FMLs had superior energy absorption capabilities compared to pure ramie composites, with the FML 2/3 configuration standing out, absorbing 52.69 J of energy. This highlights the enhanced ballistic resilience of hybrid laminates, especially with increased composite layers. Therefore, the FML, particularly the FML 2/3, exhibits a significantly higher energy-absorbing capacity, making it more effective in reducing projectile performance postpenetration. The FML 2/3 configuration showed the greatest reduction in residual velocity in both experimental and simulation results, indicating superior effectiveness in absorbing ballistic energy compared to the other configurations. This finding suggests that adding layers to the composite, especially in the FML configuration, enhances the material's resistance to projectile penetration and effectively decreases the projectile's residual velocity. However, additional research is necessary to gain a comprehensive understanding of the high-velocity performance of thermoplastic fiber metal laminates (FMLs), particularly for their potential use in industrial applications.
Publication Details
Page(s) 1447-1454
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 24, Year: 2024

Request the full text from PASTIC

Keywords
composite, Polyester, fiber metal laminate, ramie woven, aluminium, Ballistic impact
References
El-baky A.,M. A. A. A. .2023 .Fiber metal laminates based on natural/synthesis fiber composite for vehicles industry: an experimental comparative study. Fibers and Polymers., : .
Etri H. El ,Korkmaz M. E.,Gupta M. K.,Gunay M.,Xu J. .2022 .A state-of-the-art review on mechanical characteristics of different fiber metal laminates for aerospace and structural applications. The International Journal of Advanced Manufacturing Technology, 123(9) : 2965-2991.
Fadly M. S.,Bakri B.,Anwar K.,Chandrabakty S. .2023 .. , : .
Science Environmental . .Evaluation of Projectile Penetration Position on Perforated Plate on Ballistic Resistance of Composite Sandwich Panels. , 1157(1) : 12033.
Qureshi J. .2022 .A review of fibre reinforced polymer structures. Fibers, 10(3) : 27.
Bakri B.,Fadly M. S.,Anwar K.,Chandrabakty S. .2023 .. , : .
.2022 .Numerical Research on the Impacts of Composite Panel Ballistic Using Perforated Plate for Combat Vehicle. International Seminar on Science and Technology (ISST, : 15-25.
Asyraf M. R. M. ,Ishak M. R.,Syamsir A.,Nurazzi N. M.,Sabaruddin F. A.,Shazleen S. S.,Norrrahim M. N. F.,Rafidah M.,Ilyas R. A.,Abd Rashid M. Z R. A. .2022 .. , : .
. .Mechanical properties of oil palm fibre-reinforced polymer composites: A review. Journal of Materials Research and Technology, 17 : 33-65.
Preinstorfer Reichenbach S.,Hammerl P.,Kromoser M.,B. M. .2021 .A review on embedded fibre-reinforced polymer reinforcement in structural concrete in Europe.. , : .
Construction Building,Materials Building . .. , 307 : 124946.
Woods L.,Ivanov B. K. S.,D. S. B. K. S. .2021 .Fused deposition modelling of fibre reinforced polymer composites: a parametric review. Journal of Composites Science, 5(1) : 29.
Fadly M. S.,Purnowidodo A.,Setyarini P. H.,Bakri B.,Chandrabakty S. .2023 .Perforation and Penetration of Fiber Metal Laminates Target by Hemispherical Projectile. , : .
. .. International Journal of Mechanical Engineering Technologies and Applications, 4(2) : 190-197.
Hadigheh Tao Y.,Wei S. A.,Y. S. A. .2023 .Recycling of glass fibre reinforced polymer (GFRP) composite wastes in concrete: A critical review and cost-benefit analysis. , : .
. .. , 53 : 1540-1556.
Kaybal Ulus H.,H. B. Ulus H. .2023 .Out-of-plane static loading performance of lightweight aluminum/composite FML structures for retrofitting applications: Effectiveness of bonded bolted and hybrid bonded/bolted joining techniques under hydrothermal aging environment. Construction and Building Materials, 403 : 133124.
Mao Wang Z.,Yuan J.,Wei K.,Yao K.,S. K. .2024 .. , : .
. .Investigation on impact damage and residual in-plane compression strength of FML laminates. International Journal of Impact Engineering, 189 : 104956.
Costa R. D. F S.,Sales-Contini R. C. M. S.,Silva F. J. G.,Sebbe N.,Jesus A. M. P. .2023 .A critical review on fiber metal laminates (FML): from manufacturing to sustainable processing. Metals, 13(4) : 638.
A. .2023 .Fibre-Metal Laminate Structures: High-velocity impact, penetration, and blast loading-A review. , : .
Kavitha K.,Vijayan R.,Sathishkumar T. .2020 .Fibremetal laminates: A review of reinforcement and formability characteristics. Materials Today: Proceedings. 22, : 601-605.
. .A review on finite-element simulation of fibre metal laminates. Archives of Computational Methods in Engineering, 30(2) : 749-763.
. .High-velocity impact response of titanium-based fiber metal laminates. Part II: analytical modeling. , : .
. .. International Journal of Impact Engineering, 152 : 103853.
Chakraborty Kakati S.,D. Kakati S. .2020 .Delamination in GLARE laminates under low-velocity impact. Composite Structures, 240 : 112083.
Zarezadeh‐mehrizi M. A.,Liaghat G.,Ahmadi H.,Taherzadeh‐Fard A,Khodadadi A. .2022 .Numerical and experimental investigation of fiber metal laminates with elastomeric layers under low‐velocity impact. Polymer Composites, 43(4) : 1936-1947.
Naik Megeri S.,G. N. Megeri S. .2021 .Numerical studies of the low-velocity impact behaviour on hybrid fiber metal laminates. Materials Today: Proceedings. 44, : 1860-1864.
and Gaudenzi P. .2016 .Low-velocity impact response of basalt-aluminium fibre metal laminates. Materials and Design, 98 : 98-107.
Alikhani Khoramishad H.,Dariushi H.,S. H. .2018 .An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates. Composite Structures, 201 : 561-569.
. .Investigation of a new fibre metal laminate (FML) family on the base of Al‐Li‐Alloy with lower density. , : .
Und Werkstofftechnik Materialwissenschaft . .. , 43(4) : 350-355.
Birch Nassir N. A.,Cantwell R. S.,Al Teneiji W. J.,M. W. J.,Guan Z. W. W. J. .2021 .The perforation resistance of aluminumbased thermoplastic FMLs. , : .
Cortes P. .2014 .The fracture properties of a fiber metal laminate based on a self‐reinforced thermoplastic composite material. Polymer Composites, 35(3) : 427-434.
Alderliesten R. .2017 .Fatigue and fracture of fibre metal laminates. , 236 : .
. .Comparison between long and short beam flexure of a carbon fibre based FML. Procedia Structural Integrity, 26 : 120-128.
Aghchai Jalali,Khatami A.,S. A. .2018 .Experimental and numerical formability investigation of FML sheets with glass fiber reinforced core. The International Journal of Advanced Manufacturing Technology, 96 : 3881-3891.
Reyes G. .2010 .Mechanical behavior of thermoplastic FML-reinforced sandwich panels using an aluminum foam core: experiments and modeling. Journal of Sandwich Structures & Materials, 12(1) : 81-96.
Cortes A.,P. A. .2019 .Low-velocity impact response of fibre metal laminates based on aramid fibre reinforced polypropylene. Composite Structures, 220 : 708-716.
P. .2018 .High-velocity impact deformation and perforation of fibre metal laminates. Journal of Materials Science., : .
Cantwell Santiago R.,Alves W.,M. W. .2017 .Impact on thermoplastic fibre-metal laminates: Experimental observations. Composite Structures, 159 : 800-817.
Cantwell Sexton A.,Doolan W.,Kalyanasundaram M.,S. M. .2014 .Investigation of the deformation behaviour of a thermoplastic fibre metal laminate. Materials Science Forum, 773 : 503-511.
Cantwell Cortés P.,W. J. Cortés P. .2005 .The fracture properties of a fibre-metal laminate based on magnesium alloy.. , : .
Composites Part B . .. , 37(2-3) : 163-170.
Crouch I. G. .2017 .Laminated materials and layered structures. In The science of armour materials, : 167-201.
0

Citations

0

Downloads

39

Views