No Detail Found!

CFD assessment of internal vapor/liquid separator in an ebullated bed reactor (EBR) for heavy oil hydroprocessing

Author(s)
Mohmmed Abdullah Sanam Department of Chemical Engineering, College of Engineering, University of Tikrit, Iraq
Saad N. Saleh Department of Chemical Engineering, College of Engineering, University of Tikrit, Iraq
Maadh Hasan Alwan Department of Chemical Engineering, College of Engineering, University of Tikrit, Iraq
Jasim I. Humadi Department of Chemical Engineering, College of Engineering, University of Tikrit, Iraq
Ahmad A. Aabid Department of Reservoir Engineering, College of Petroleum and Mining Engineering, University of Mosul, Mosul, Iraq
Rajesh Haldhar School of Chemical Engineering, Yeungnam University, Gyeongsan 35841, Republic of Korea
Shankar Sehgal Mechanical Engineering, UIET, Panjab University, Chandigarh, India
Abstract
The ebullated-bed reactor (EBR) is an important system used in the upgrading of heavy oil residue into valuable light products in petroleum refinery operations. The assessment of the gas separation region hydrodynamics is very significant to investigate the performance of EBR. An advanced understanding of EBR fluid dynamics will help in improving the design of existing and future commercial units. For this reason, the development of a computational fluid dynamics (CFD) model is very challenging, where understanding the fundamentals of fluid dynamics in EBR is carried out using a three dimensional model and the turbulence model with a standard wall function in cup geometric design. The two models were used to analyze the influence of operational parameters such as recycle ratio, and inlet velocity on gas fraction recycled and separation efficiency. Moreover, the prediction of the regime transitions occurring in the freeboard region of the EBRs was achieved using the two aforementioned models. The results of the fluid dynamics behavior revealed that the inlet velocity has a substantial effect on gas fraction recycled and separation efficiency. The liquid mean residence time scale provided a valuable efficiency result for the separation within the range of expected mean residence times. This investigation, therefore, provided a good framework for the evaluation of future design and gave a better understanding of gas and liquid flow patterns in EBR.
Publication Details
Page(s) 666-676
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 11, Year: 2024

Request the full text from PASTIC

Keywords
computational fluid dynamics, drag force, bubble diameter, separation efficiency, ebullated bed reactor
References
Ruzicka M. C. .2013 .On the stability of a bubble column. Chemical Engineering Research and Design, 91(2) : 191-203.
. .A review of process aspects and modeling of ebullated bed reactors for hydrocracking of heavy oils. Catalysis Reviews, 52(1) : 60-105.
McKnight C. ,Hackman L. P.,Grace J. R.,Macchi A.,Kiel D.,Tyler J. .2003 .Fluid Dynamic Studies in Support of an Industrial Three‐Phase Fluidized Bed Hydroprocessor. The Canadian Journal of Chemical Engineering, 81(3‐4) : 338-350.
Gomes Pfleger D.,Gilbert S.,Wagner N.,H. G. N. .1999 .. , : .
. .Hydrodynamic simulations of laboratory scale bubble columns fundamental studies of the Eulerian-Eulerian modelling approach. Chemical Engineering Science, 54(21) : 5091-5099.
. .Ebullated bed fluid dynamics relevant to industrial hydroprocessing. Chemical Engineering Science, 126 : 730-744.
Pjontek D. .2014 .Bubble characteristics were measured using a mono fibre optical probe in a bubble column and freeboard region under high gas holdup conditions. Chemical Engineering Science, 111 : 153-169.
Buttke R. D ,Frey J. R. .1989 .Process for collecting vapor in ebullated bed reactors. , 4(804) : 458.
Washington Trademark,Office Trademark,Grace J. R.,Zhu J. .1992 .Understanding of the LC-Finer Hydrodynamics. , : .
Ong Gupta P.,Al-Dahhan B.,Dudukovic M. H.,Toseland M. P.,B. A. M. P. .2001 .Hydrodynamics of churn turbulent bubble columns: gas-liquid recirculation and mechanistic modeling. Catalysis today, 64(3-4) : 253-269.
Mohammed Saleh S. N.,Al-Jubory F. K A. A.,Barghi S. .2018 .CFD assessment of uniform bubbly flow in a bubble column. Journal of Petroleum Science and Engineering, 161 : 96-107.
Ziegenhein T.,Rzehak R.,Lucas D. R. .2015 .Transient simulation for large-scale flow in bubble columns. Chemical Engineering Science, 122 : 1-13.
Sekoguchi Sato Y.,K. Sato Y. .1975 .Liquid velocity distribution in two-phase bubble flow. International Journal of Multiphase Flow, 2(1) : 79-95.
and Schweich D. .2009 .CFD simulation of bubble column flows Investigations on turbulence models in RANS approach. , 64(21) : 4399-4413.
. .Prediction of multiphase flow pattern inside a 3D bubble column reactor using a combination of CFD and ANFIS. RSC Advances, 5(104) : 85652-85672.
Sanyal Chen P.,Duduković J.,M. P. J.,Behkish A.,Sehabiague L.,Heintz Y. J.,Oukaci R.,Morsi B. I. .2008 .An algorithm for predicting the hydrodynamic and mass transfer parameters in bubble column and slurry bubble column reactors. Fuel processing technology, 89(4) : 322-343.
. .Effect of surfactant on homogeneous regime stability in a bubble column. Chemical Engineering Science, 63(4) : 951-967.
Tabib M. V.,Roy S. A.,Joshi J. B. .2008 .CFD simulation of bubble column analysis of interphase forces and turbulence models. Chemical Engineering Journal, 139(3) : 589-614.
Buwa V. V.,Ranade V. V.,Bech K. .2005 .Dynamic simulation of a 2D bubble column. Chemical engineering science, 60(19) : 5294-5304.
Duduković Chen P.,Sanyal M. P.,J. M. P.,Roy S. .2013 .Euler-Euler simulation of bubbly flow in a rectangular bubble column: Experimental validation with Radioactive Particle Tracking. Chemical Engineering Journal, 225(3) : 818-836.
Bannari Kerdouss F.,Proulx A.,P. A. .2006 .CFD modeling of gas dispersion and bubble size in a double turbine stirred tank. Chem Eng. Sci, 61(10) : 3313-22.
0

Citations

0

Downloads

34

Views