No Detail Found!

Scada implementation in microhydro power plant control and monitoring systems of screw turbine type

Author(s)
Tineke Saroinsong Department of Mechanical Engineering, Department of Electrical Engineering,Manado State Polytechnic, Manado,Indonesia
Alfred Noufie Mekel Department of Mechanical Engineering, Department of Electrical Engineering,Manado State Polytechnic, Manado,Indonesia
I Gede Para Atmaja Department of Mechanical Engineering, Department of Electrical Engineering,Manado State Polytechnic, Manado,Indonesia
Abstract
Screw turbine-type micro-hydro power plants are still controlled manually by humans when there is a change in the electrical load on the generator output. If there is a change in the electrical load, the generator output voltage will change, thus affecting the rotation of the turbine being used. In this case, humans are needed to manually regulate the flow of water entering the turbine to maintain the stability of the generator output voltage by controlling the sluice gate. The water discharge entering the screw turbine will rotate the generator through a belt/gearbox pulley transmission, thus producing an electrical voltage at the generator output. To maintain the stability of the generator output voltage, it is necessary to control the water discharge entering the screw turbine. The expected goal of this research is to design a control system for a screw turbine type microhydro power plant to stabilize the generator output voltage and monitor the output of a screw turbine type generator using a SCADA (Supervisory Control, and Data Aquisition) system. The method used is the research and development method, namely the system design stage based on secondary data that has been collected, where the system design includes hardware design and software design, followed by making hardware such as control panels and devices. Software, which includes display design and leader diagrams and testing, is carried out by testing the system on software, hardware, and overall system testing. From the results of the discussion and analysis, the screw turbine type microhydro power plant control design system was created, a load control system consisting of 6 groups and sluice gate opening control that uses an ultrasonic sensor to determine the water level. With the results of controlling the sluice gate at a door opening of 30 mm, the generator voltage is 18.42 Volts DC, DC current is 0.0 Ampere at a load of 0 watts, when the load is 30 watts the generator voltage decreases by 18.40 volts, current is 1.37 Ampere. Through the on-line monitoring system, electrical parameters are obtained which are displayed on the SCADA system by looking in real-time at the history of DC voltage and DC current, DC power, and DC energy generated by the screw turbine-type DC generator. The voltage read is 18. 57 volts, current 1.37 Amperes, DC electrical power is 25.4 watts with a DC light load of 30 watts.
Publication Details
Page(s) 332-336
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 6, Year: 2024

Request the full text from PASTIC

Keywords
PLC, screw turbine, HMI, SCADA
References
Müeller G. .2009 .Simplified Theory of Archimedean screw. Journal of Hydraulic, 47 : 666-669.
Tineke Saroinsong .2016 .Fluid Flow Phenomenon in a Three-Bladed Power Generating Archimedes Screw Turbine. Greece (Yunani)., 9(2) : 72-79.
Tineke Saroinsong .2016 .Performance of Three-Bladed Archimedes Screw Turbine. ARPN Journal of Engineering and Applied Sciences, 11(15) : 9491-9495.
Handoko .2017 .Rancang Bangun Sistem SCADA (SupervisioryControl and Data Acquisition) pada Instalasi Pengolahan Air Sungai Cihideung Institut Pertanian Bogor. jTEP Jurnal Keteknikan Pertanian, 5(2) : .
Setiawan Ahmad,Budi Ahmad .2016 .Peningkatan Keamanan Supervisiory Control and Data Acquisition (SCADA) pada Smart Grid Sebagai Infrastruktur Kritis. Jurnal Penelitian Pos dan Informatika, 6(1) : .
Ardi .2020 .Design of Control and Monitoring System for BoilerWastewater Treatment Process Using Programmable Logic Controller and HMI (Human Machine Interface). Sinergi, 24(2) : .
Saputra . .5 dengan PLC Siemens S300 sebagai Pengendali Sistem Perakitan Kaleng. 2014. SCADA Berbasis Wonderware In Touch 10, : .
Jurnal Ilmiah Elektroteknika Technѐ . .. , 13(1) : .
Ike Bayusari .2013 .Perancangan Sistem Pemantauan Pengendali Suhu pada Stirred Tank Heater menggunakan Supervisiory Control and DataAcquisition (SCADA). Jurnal Rekayasa Elektrika, 10(3) : .
Asep Insani .2013 .Desain Sistem SCADA Jarak Jauh Menggunakan Layanan VPN 3G untuk Penggerak Pompa pada Sistem Pengolahan Air. Buletin Pos dan Telekomunikasi, 11(1) : .
Sitompul Erwin .2021 .IoT-based Running Time Monitoring System forMachine Preventive Maintenance Scheduling. Elkha. Jurnal Teknik Elektro, 13(1) : .
0

Citations

0

Downloads

24

Views