It is well established that microstructural variations change the mechanical properties of metals and alloys. In the present work an attempt is made to investigate the correlation between microstructural phases and torsional behavior of carburized steel. For this purpose a low carbon steel (AISI 1020) was selected. The specimens were gas carburized at 925oC in methane atmosphere and tempered at 120oC and consequently quenched at 65oC in oil to change the microstructure from case to core. Torsion tests were performed on as received, carburized and tempered specimens. The results obtained reveal that torsional characteristics such as torque, surface shear strength and modulus or rigidity of carburized steel specimens improved with martensite at surface along with certain amount of retained austenite at case and fine pearlite at core. The 81% increase in torque and surface shear strength, and 94.6% increase in modulus of rigidity as compared to as received specimen was noted. Torsion tests were performed using torsion testing machine and light optical microscope were used to investigate the microstructure of the as received, carburized and tempered specimens.