No Detail Found!

Recycling of lubricating oil by using potassium hydroxide efficiently.

Author(s)
Hassan Ali Durrani Department of Mechanical Engineering, Meharan University of Engineering and Technology, Jamshoro, Pakistan
Muhammed Ibrahim Panhwar Department of Mechanical Engineering, Meharan University of Engineering and Technology, Jamshoro, Pakistan
Rafique Akhtar Kazi Institute of Petroleum and Natural Gas Engineering, Mehran University of Engineering and Technology, Jahmshoro, Pakistan
Abstract
Different processes for re-generation of base oil from used lubricant oil had been developed to over come two main issues, eliminate the pollution sources and the need of preserving crude oil reserves. Waste lubricating oils may be re-refined/re-generated by treatment with an organic solvent that dissolves base oil and flocculates the major part of additives and particulate matter. It is considered that the polar nature of the alcohol is the origin of the stabilization by electric repulsion of some of the particulate matter that provides an electrostatic media that encourage improving the solvent flocculating capability. An addition of KOH (Potassium Hydroxide) solution containing ions that neutralize those charge, break this stability. In this study, experiments were conducted on the use of KOH to enhance flocculation. The quantity of KOH addition was varied in order to know its effect on the sedimentation rate. The result from the study showed that, the introduction of KOH promotes fast sedimentation process and the particulate settling rate was directly proportional to the amount of KOH addition and the settling was finished within 40 minutes time.
Publication Details
Page(s) 129-136
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 29, Issue: 1, Year: 2010

Request the full text from PASTIC

0

Citations

0

Downloads

54

Views