No Detail Found!

Effect of austempering temperature on microstructure and mechanical properties of ADI.

Author(s)
Muhammad Moazam Baloch Department of Metallurgy & Materials Engineering, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan
Muhammad Ishaque Abro Department of Metallurgy & Materials Engineering, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan
Abstract
ADI (Austempered Ductile Cast Iron) has emerged as a major engineering material in recent years because of its excellent mechanical properties. In the present work, a low manganese nodular cast iron with predominantly pearlitic as-cast structure was processed by a unique austempering process. The specimens were austempered at 300 and 320oC for I hour after austenitizing at 900oC for I hour resulted in microstructure consisting ausferrite, a combination of acicular ferrite and stabilized austenite. Microstructural development has been studied using light optical microscope and scanning electron microscope. Mechanical properties such as ultimate tensile strength, toughness, percentage elongation and hardness have also been measured. A/43% and 25% increase in ultimate tensile strength and hardness were measured respectively, where as, a substantial reduction (77%) in percentage elongation was measured and a nominal (1.1%) increment in toughness was observed.
Publication Details
Page(s) 137-144
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 29, Issue: 1, Year: 2010

Request the full text from PASTIC

0

Citations

0

Downloads

100

Views