No Detail Found!

Synthesis of Cuprous Oxide Nano Cubes and Platelets using Both Electrodes of Copper.

Author(s)
Danyal Ahmad Department of Materials Engineering, NED University of Engineering & Technology, Karachi, Pakistan
Muhammad Sohail Department of Materials Engineering, NED University of Engineering & Technology, Karachi, Pakistan
Fayaz Hussain Department of Materials Engineering, NED University of Engineering & Technology, Karachi, Pakistan
HUMAIR SIDDIQUI Department of Materials Engineering, NED University of Engineering & Technology, Karachi, Pakistan
Muhammad Yasir Department of Chemical Engineering, University of Karachi, Karachi, Pakistan
Abstract
Cu2O (Cuprous Oxide) is usually produced using expensive electrodes such as platinum, graphite, etc. In the present study, it is shown that Cu2O nanostructures can be synthesized by electrolysis using copper as both anode and cathode. In the present study, the effect of electrolyte pH on the morphology of the Cu2O nanostructures was studied. For this, the copper electrodes of 99.99% purity with 3x3x0.3 mm dimensions were dipped in the electrolytes of simple distilled and double distilled water and connected with the external power source. The synthesized products were analyzed using SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectroscope) and UV spectroscope. Results showed that Cu2O nanostructures of 67 and 150 nm size were developed when the pH of electrolyte was 6.4 and 5.7 respectively, otherwise not. From the course of experiments conducted in this work it is noted that pH play vital role in the production of Cu2O nanoparticles using simple electrolysis technique.
Publication Details
Page(s) 415-420
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 38, Issue: 2, Year: 2019

Request the full text from PASTIC

References
Cao , G.,Liu , D.,Nos, 2008.Template-Based Synthesis of Nanorod, Nanowire,,Advances in Colloid and Interface Science 136 45 -64
Singh , D.P.,Neti , N.R.,Sinha , A.S.K.,Srivastava , O.N., 2007.Growth of Different Nanostructures of Cu2O (Nanothreads, Nanowires, and Nanocubes) by Simple Electrolysis Based Oxidation of Copper”,The Journal of Physical 111 1638 -1645
Hara , M.,Komoda , M.,Hasei , H.,Yashima , M.,Ikeda , S.,Takata , T.,Kondo , J.N.,Domen , K.A., 2000.Study of Mechano-Catalysts for Overall Water Splitting”,The Journal of Physical Chemistry-B 104 780 -785
de Jongh , P.E.,Vanmaekelbergh , D.,Kelly , J.J.,ChemicalCommunications, 1999.Cu2O: A Catalyst for the Photochemical Decomposition of Water”, 12 1069 -1070
Asano , Y.,Nakaoka , K.,Murashiro , K.,Komatsu , T.,Hoshino,MaterialsLetters, 2012.Emplate-Free Electrochemical Preparation of Dendritic Copper Nanowire and Its Capacitor Properties”, 81 162 -164
Huang , L.,Peng , F.,Yu , H.,Wang, 2009.“Preparation of Cuprous Oxides with Different Sizes and Their Behaviors of Adsorption, Visible-Light Driven Photocatalysis,Solid State Sciences 11 129 -138
April,Shoeib , M.A.,Abdelsalam , O.E.,Khafagi , M.G.,Hammam, 2012.Synthesis of Cu2O Nanocrystallites and Their Adsorption and Photocatalysis Behavior”,Advanced Powder Technology 23 298 -304
Ng , S.,Ngan , A., 2013.One and Two-Dimensional Cuprous Oxide Nano/Microstructures Fabricated on Highly Orientated Pyrolytic Graphite (HOPG) by Electrodeposition”,Electrochimica Acta 114 379 -386
Bai , Y.,Yang , T.,Gu,Zheng,PowderTechnology, 2012.Shape Control Mechanism of Cuprous Oxide Nanoparticles in Aqueous Colloidal Solutions”, 227 35 -42
Majumder , M.,Biswas , I.,Pujaru , S.,Chakraborty , A., 2015.Cuprous Oxide Thin Films Grown by Hydrothermal Electrochemical Deposition Technique”,Thin Solid Films 589 741 -749
Chang , Y.,Teo , J.J.,Zeng , H.C., 2005.Formation of Colloidal CuO Nanocrystallites and Their Spherical Aggregation and Reductive Transformation to Hollow Cu2O Nanospheres”,Langmuir 21 1074 -1079
Rakhshani , A.E.,Solid-StateElectronics, 1986.Characteristics and Photovoltaic Properties of Cuprous Oxide - A Review”, 29 7 -17
Robatjazi, H., Zhao, H., Swearer, D.F., Hogan, N.J., Zhou, L., Alabastri, A., McClain, M.J., Nordlander, P., and Halas, N.J., “Plasmon-Induced Selective Carbon Dioxide Conversion on Earth-Abundant Aluminum-Cuprous Oxide Antenna-Reactor Nanoparticles”, Nature Communications, Volume 8, No. 1, pp. 27, 2017
Lu, Y., Wang, T., Tian, Z., and Ye, Q., “One-Pot Synthesis of Cuprous Oxide-Reduced Graphene Oxide Nanocomposite as an Anode Material for Lithium Ion Battery”, International Journal of Electrochem Science, Volume 12, pp. 3941-3949, 2017
Hou, Y., Hu, W., Gui, Z., and Hu, Y., “Effect of Cuprous Oxide with Different Sizes on Thermal and Combustion Behaviors of Unsaturated Polyester Resin”, Journal of Hazardous Materials, Volume 334, pp. 39-48, 2017
Wang, H., Zhang, Y., Wang, Y., Ma, H., Du, B., and Wei, Q., “Facile Synthesis of Cuprous Oxide Nanowires Decorated Graphene Oxide Nanosheets Nanocomposites and Its Application in Label-Free Electrochemical Immunosensor”, Biosensors and Bioelectronics, Volume 87, pp. 745-751, 2017
Rezaie, A.B., Montazer, M., and Rad, M.M., “Antibacterial, UV Protective and Ammonia Sensing Functionalized Polyester Fabric Through in Situ Synthesis of Cuprous Oxide Nanoparticles”, Fibers and Polymers, Volume 18, No. 7, pp. 1269-1279, 2017
0

Citations

0

Downloads

40

Views