No Detail Found!

Optimization of sono-electrocoagulation process for the Removal of dye using central composite design.

Author(s)
Abdulrauf Shah Department of Chemistry, University of Karachi, Karachi, Pakistan
Hajira Tahir Department of Chemistry, University of Karachi, Karachi, Pakistan
Abstract
Sono-electrocaogulation process was successfully applied for the removal of RR120 (Reactive Red 120) in the presence of activated carbon. For this purpose, the process variables were optimized using CCD (Central Composite Design). The operational parameters of the technology were the amount of activated charcoal (0.2-2.0g), amount of NaCl electrolyte (1-10g), sonication time (30-120 min) and RR120 dye concentration (40-120 mg/L), respectively. Consequently, the 100% dye removal was determined at the optimal conditions for the process obtained by CCD. In addition, the sonication time, amount of adsorbent and dye concentrations were found the significant process factors. Furthermore, the effects of other parameters like the electric current, current efficiency, amount of NaCl, temperature and formation of coagulants were also studied in the dye removal process, separately. The FTIR (Fourier Transfer Infrared) spectrums were monitored to identify the classes of functional groups present in the dye molecule before and after the treatment. Therefore, the sono-electrocaogulation process was proved an effective technique for purifying simulated wastewater containing RR120 dye.
Publication Details
Page(s) 399-414
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 38, Issue: 2, Year: 2019

Request the full text from PASTIC

References
He, C.C., Hu, C.Y., and Lo, S.L., “Evaluation of Sono- Electrocoagulation for the Removal of Reactive Blue 19|Passive Film Removed by Ultrasound”, Separation and Purification Technology, Volume 165, pp. 107-113, Taiwan, 2016.
Kobya, M., Can, O.T., and Bayramoglu, M., “Treatment of Textile Wastewaters by Electrocoagulation Using Iron and Aluminum Electrodes”, Journal of Hazardous Materials, Volume 100, No.1, pp. 163-178, Turkey, 2003.
Lakshmi, 2013.Effluent  by  Electrocoagulation:  Influence of Ultrasound and a Hybrid Electrode on COD Removal”, 116 378 -384
Raschitor,Rodrigo , M.A., 2014.of Wastewater  Polluted  with  Rhodamine  6G”,  Separation and, 135 110 -116
Hamdan,El-Naas, 2014.“An Electrocoagulation  Column  (ECC)  for  Groundwater Purification”,Journal  of  Water  Process  Engineering 4 25 -30
Dahlem,Scaling-Up, 1999.Possibility for Sonochemical Reactions”, 54 2829 -2838
Lacasa, 2012., 45 256 -262
Mollah ,  M.Y.A.,  Schennach,  R.,  Parga,   J.R.,Cocke , D.L., 2001.-Science, 1 29 -41
Stack,Wessels , T.K.,Water, 2005.Influencing  the  Ultrasonic  Separation  of Oil-in-, 3 153 -160
Can,Bayramoglu , M., 2006., 2 181 -187
Yuksel,Sustainable, 2012.Decolorization of  a  Reactive  Dye  Solution  and  Treatment  of  a  Textile Wastewater  by  Electrocoagulation, 4 524 -535
Sivakumar, 2002., 3 123 -131
Un, 2014.Whey Wastewater:  An  Application  of  Response  Surface Methodology”,Journal  of  Environmental  Management 146 245 -250
Jiang ,   J.Q., 2002., 16 4064 -4078
Chen, 2000., 1 65 -76
Kushwaha ,   J.P.,I.D., 2010.Removal  from  Dairy  Wastewater  by Electrochemical  Treatment  and, 2 198 -205
Canizares, 2005., 12 4178 -4185
Saharan, V.K., Badve, M.P., and Pandit, A.B., “Degradation of Reactive Red 120 Dye Using Hydrodynamic Cavitation”, Chemical Engineering Journal, Volume 178, pp. 100-107, India, 2011
Goel, M., Hongqiang, H., Mujumdar, A.S., and Ray, M.B., “Sonochemical Decomposition of Volatile and Non- Volatile Organic Compounds: A Comparative Study”, Water Research, Volume 38, No. 19, pp. 4247-4261, Singapore, 2004.
Borbély, G., and Nagy, E., “ Removal of Zinc and Nickel Ions by Complexation–Membrane Filtration Process from Industrial Wastewater”, Desalination, Volume 240, No. 1-3, pp. 218-226, Hungary, 2009
Chen, X., Chen, G., and Yue, P.L., “Anodic Oxidation of Dyes at Novel Ti/B-Diamond Electrodes”, Chemical Engineering Science, Volume 58, No. 3, pp. 995-1001, China, 2003.
Mollah, M.Y.A., Schennach, R., Parga, J.R., and Cocke, D.L., “Electrocoagulation (EC) - Science and Applications”, Journal of Hazardous Materials, Volume 84, No.1, pp. 29-41, USA, 2001
El-Ashtoukhy, E.Z., and Amin, N.K., “Removal of Acid Green Dye 50 from Wastewater by Anodic Oxidation and Electrocoagulation: A Comparative Study”, Journal of Hazardous Materials, Volume 179, No. 1, pp. 113-11, Egypt, 2010
Picard, T., Cathalifaud-Feuillade, G., Mazet, M., and Vandensteendam, C., “Cathodic Dissolution in the Electrocoagulation Process Using Aluminium Electrodes”, Journal of Environmental Monitoring, Volume 2, No. 1, pp. 77-80, France, 2000
Raju, G.B., Karuppiah, M.T., Latha, S.S., Parvathy, S., and Prabhakar, S., “Treatment of Wastewater from Synthetic Textile Industry by Electrocoagulation– Electrooxidation”, Chemical Engineering Journal, Volume 144, No. 1, pp. 51-58, India, 2008
Oller, I., Malato, S., and Sánchez-Pérez, J., “Combination of Advanced Oxidation Processes and Biological Treatments for Wastewater Decontamination: A Review”, Science of the Total Environment, Volume 409, No. 20, pp. 4141-4166, Spain, 2011
Brillas, E., and Martínez-Huitle, C.A., “Decontamination of Wastewaters Containing Synthetic Organic Dyes by Electrochemical Methods: An Updated Review”, Applied Catalysis-B: Environmental, Volume 166, pp. 603-643, Spain, 2015
Aber, S., Amani-Ghadim, A.R., and Mirzajani, V., “Removal of Cr(VI) from Polluted Solutions by Electrocoagulation: Modeling of Experimental Results Using Artificial Neural Network”, Journal of Hazardous Materials, Volume 171, No. 1, pp. 484-490, Iran, 2009.
Llanos, J., Cotillas, S., Cañizares, P., and Rodrigo, M.A., “Conductive Diamond Sono-Electrochemical Disinfection (CDSED) for Municipal Wastewater Reclamation”, Ultrasonics Sonochemistry, Volume 22, pp. 493-498, Spain, 2015
Yildiz, Y.ª., Koparal, A.S., Ýrdemez, Þ., and Keskinler, B., “Electrocoagulation of Synthetically Prepared Waters Containing High Concentration of NOM Using Iron Cast Electrodes”, Journal of Hazardous Materials, Volume 139, No. 2, pp. 373-380, Turkey, 2007.
Golder, A.K., Samanta, A.N., and Ray, S., “Removal of Trivalent Chromium by Electrocoagulation”, Separation and Purification Technology, Volume 53, No. 1, pp. 33-41, India, 2007.
Katal, R., and Pahlavanzadeh, H.. “Influence of Different Combinations of Aluminum and Iron Electrode on Electrocoagulation efficiency: Application to the Treatment of Paper Mill Wastewater”, Desalination, Volume 265, No. 1, pp. 199-205, Iran, 2011.
Canizares, P., Carmona, M., Lobato, J., Martinez, F., and Rodrigo, M.A., “Electrodissolution of aluminum Electrodes in Electrocoagulation Processes”, Industrial & Engineering Chemistry Research, Volume 44, No. 12, pp. 4178-4185, Spain, 2005.
Chen, X., Chen, G., and Yue, P.L., “Separation of Pollutants from Restaurant Wastewater by Electrocoagulation”, Separation and Purification Technology, Volume 19, No. 1, pp. 65-7 6, China, 2000
Calvete, T., Lima, E.C., Cardoso, N.F., Vaghetti, J.C., Dias, S.L., and Pavan, F.A., “Application of Carbon Adsorbents Prepared from Brazilian-Pine Fruit Shell for the Removal of Reactive Orange 16 from Aqueous Solution: Kinetic, Equilibrium, and Thermodynamic Studies”, Journal of Environmental Management, Volume 91, No. 8, pp. 1695-1706, Brazil, 2010.
0

Citations

0

Downloads

74

Views