No Detail Found!

Design and manufacturing of a laboratory singeing machine for cotton woven fabrics

Author(s)
Uzma SYED Department of Textile Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
Awais KHATRI Department of Textile Engineering, Mehran University of Engineering & Technology, Jamshoro, PAKISTAN
R. A. JHATIAL National Institute of Science and Technical Education, Islamabad, PAKISTAN
Abstract
A table top singeing machine was designed for small scale singeing the cotton woven fabric. The machine was comprises of six tension rollers, a burner with adjustable flame angle and runs at the acceptable speed of 10- 30 m min-1 .The rollers and burner were made from MS pipe material. For singeing process trial, a grey fabric sample after manually pre-cleaning was wound on the let-off roller and threaded through the machine rollers up to take-up roller. The flame angle (45o) was adjusted according to the fabric condition (mild or sever singeing). 'Singeing process was carried out at the speed of 20 m mini-1 by turning on the machine drive and the flame. The fabric was continuously released from the let-off roller, passed through die burner flame and wound onto the take-up roller. The singed fluff on the fabric surface was manually removed with brush after singeing. The machine can singe only one side of the fabric and suitable for laboratory scale singeing.
Publication Details
Page(s) 321-323
DOI DOI not available
Published Journal: Science International, Volume: 23, Issue: 4, Year: 2011

Request the full text from PASTIC

0

Citations

0

Downloads

112

Views