No Detail Found!

Deployment of Multi-fuzzy Model Based Routing in RPL to Support Efficient IoT.

Author(s)
Emran Aljarrah Management Information System, Girne American University (GAU). Girne, North, Cyprus
Abstract
- IPv6 routing protocol for Low Power Lossy Network (LLN) is known as RPL protocol designed for the Internet of Things. In RPL, fuzzy logic based unicasting is discussed in many research works to achieve the best parent selection. Also multicasting is performed by using SMRF and BMRF algorithm. These conventional multicast algorithms were not able to suppress the duplicate packets which minimize the Quality of Service (QoS) especially delay metric. Even though fuzzy logic for unicasting is efficient, it failed to consider all the significant metrics that is required. Hence the main focus of this paper is to address the use of the RPL routing protocol, by proposing an objective function based on fuzzy logic. In RPL QoS is constructed by Destination Oriented Directed Acyclic Graph (DODAG) that plays a major role. The defined Objective function is achieved by novel Multi-fuzzy Logic (Ml-FL) model which includes three significant categories of metrics as (i) node oriented metrics, (ii) channel oriented metrics and (iii) link oriented metrics for unicasting. This Ml-FL has proven the usage of 9 individual metrics to choose the best parent for unicast. Each metric is defined with three other parameters for effective parent node selection. To solve the complexity of Fuzzy logic, parallel processing of multiple fuzzy logic blocks is proposed. An enhanced-BMRF algorithm is proposed with the minimum of delay and duplicate packets. The effectiveness of the proposed RPL protocol is evaluated using IEEE 802.15.4 standard that is applied over OMNeT++ simulator. Finally, simulation shows promising results of proposed RPL in terms of end-to-end delay, energy, hop count, packet delivery ratio and packet loss rate.
Publication Details
Page(s) 457-473
DOI DOI not available
Published Journal: International Journal of Communication Networks and Information Security, Volume: 9, Issue: 3, Year: 2017

Request the full text from PASTIC

Keywords
Routing, IEEE 802.15.4, Internet of Things, Quality of Service, Multicast algorithm
References
OanaIova, 2016.RPL: The Routing Standard for the Internet of Things,IEEE Communications Magazine 12 16 -22
T.Winter, 2012.RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks,”,IETF RFC 6550 -
JorgeGranjal, 2015.Security for the Internet of Things: A Survey of Existing Protocols,IEEE Communications Surveys & Tutorials 17 1294 -1312
JonathanW.,Hui , David E.,Culler, 2010.IPv6 in Low-Power Wireless Networks”,Proceedings of the IEEE 11 1865 -1878
BogdanPavković, 2011.analysis and simulation of wireless and mobile systems,Multipath opportunistic RPL routing over IEEE 802.15.4” 179 -186
MingZhao,Wang-HeiHo, 2016.An Energy-Efficient Region-Based RPL Routing Protocol for LowPower and Lossy Networks”,IEEE Internet of Things Journal 3 1319 -1333
ZhenfeiWang, 2016.An Optimized RPL Protocol for Wireless Sensor Networks”,IEEE International Conference on Parallel and Distributed Systems 294 -299
SheerazAlvi,FakharulHassan, 2017.On the energy efficiency and stability of RPL routing protocol”,IEEE International Wireless Communications and Mobile Computing Conference 1927 -1932
MarcBarcelo, 2016.Addressing Mobility in RPL With Position Assisted Metrics”,IEEE Sensors Journal 16 2151 -2161
AhmedBader, 2013.Mohamed-Slim Alouini, “Optimized Beaconless Geo-Routing for Smart Utility Networks”,IEEE Sensors Journal 12 4587 -4588
MahaBouaziz,NV, 2017.EC-MRPL: An energy-efficient and mobility support routing protocol for Internet of Mobile Things”,IEEE Annual Consumer Communications & Networking Conference 19 -24
SharwariSatish,Solapure, 2016.Internet of Things: A survey related to various recent architectures and platforms available”,IEEE International Conference on Advances in Computing, Communications and Informatics 2296 -2301
MariaRita,Palattella, 2013.Standardized Protocol Stack for the Internet of (Important) Things”,IEEE Communication Surveys & Tutorials 15 1389 -1406
BogdanPavkovic, AndrzejDuda, Won-JooHwang, FabriceTheoleyre, “Efficient topology construction for RPL over IEEE 802.15.4 in wireless sensor networks”, Elsevier Ad hoc Networks, Vol. 15, pp. 25 - 38, 2014 25 -38
Chun-ming Tang, 2012.Yu-ping Wu, “The P2P-RPL Routing Protocol Research and Implementation in contiki operating system”,IEEE International Conference on Instrumentation & Measurement 1472 -1475
MingZhao,ArunKumar, 2017.A comprehensive study of RPL and P2P-RPL routing protocols: Implemetation, cahllenges,Springer Peer-toPeer Networking and Applications 10 1232 -1256
YadTahir,JulieMcCann, 2017.BRPL: Backpressure RPL for High-throughput and Mobile IoTs”,IEEE Transactions on Mobile Computing, No. 99 -
QusaiQ.,Abuein , Muneer Bani Yassein, Mohammed Q.,Shatnawi, 2016.Performance Evaluation of Routing Protocol (RPL) for Internet of Things”,International Journal of Advanced Computer Science and Applications 7 17 -20
TaoZhang, 2014.Evaluating and analyzing the performance of RPL in contiki”,ACM Proceedings of the first international workshop on Mobile sensing, computing and communication 19 -24
BelghachiMohamed, 2015.QoS Routing RPL for Low Power and Lossy Networks”,International Journal of Distributed Sensor Networks, USA -
HananeLamaazi, 2017.RPL-Based Networks in static and mobile environment: a performance assessment analysis”,Elseiver Journal of King -
WenboZhang, 2017.E2HRC: An Energy-Efficient Heterogeneous Ring Clustering Routing Protocol for Wireless Sensor Networks”,IEEE Access 5 1702 -1713
WalidKhallef, 2017.Multiple constrained QoS routing with RPL”, -
PanagiotisKarkazis, 2013.Evaluating routing metric composition approaches for QoS differentiation in low power and lossy networks, 19 1269 -1284
MeisamNesary,Moghadam, 2015.“Multi-class Multipath Routing Protocol for Low Power Wireless Networks with Heuristic Optimal Load Distribution”,Springer Wireless Personal Communications 82 861 -881
GeorgeOikonomou, 2012.Stateless multicast forwarding with RPL in 6LowPAN sensor networks”,IEEE International Conference on Pervasive Computing and Communications Workshops 272 -277
CsabaKiraly, 2015.Overcoming memory limitations in RPL point-tomultipoint routing”, 157 -160
Thomas M. M. Meyfroyt , Sem C. Borst, Onno J.,Boxma, 2015.On the scalability and message count of Trickle-based broadcasting schemes,Springer Queuing Systems 81 203 -230
SungwonLee, 2016.Consistency of Path based Upward Path Recovery Method to Reduce Path Recovery Delay for RPL”,ACM Proceedings of the International Conference on Research in Adaptive and Convergent Systems 117 -120
Patrick-OlivierKamgueu, 2015.On Design and Deployment of Fuzzy-Based Metric for Routing in Low-Power and Lossy Networks”, 789 -795
JeongGilKo, 2014.MoMoRo:Providing Mobility Support Low-Power Wireless Applications”,IEEE Systems Journal -
OlfaGaddour, 2015.Quality-ofService aware routing for static and mobile IPv6-based low-power and lossy sensor networks using RPL”, Elsevier Ad hoc networks, -
GeorgeOikonomou, 2013.IPv6 Multicast Forwarding in RPL-Based Wireless Sensor Networks”, -
GuillermoGastón,Lorente,MatthiasCarlier, 2016.Bidirectional Multicast RPL Forwarding”,Elseiver Ad Hoc Networks -
SambhajiSarode, 2017.,International Journal of Communication Networks and Information Security IJCNIS 9 253 -262
NyomanGunantara, 2017.Optimal Path Pair Routes through Multi-Criteria Weights in Ad Hoc Network Using Genetic Algorithm”,International Journal of Communication Networks and Information Security IJCNIS 9 88 -94
0

Citations

0

Downloads

75

Views