No Detail Found!

Evaluation of Mesh of Liberation of Zard Koh and Kulli Koh Iron Ores of Pakistan.

Author(s)
Sultan Ahmed Khoso Department of Mining Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammad Ishaque Abro Department of Metallurgy & Materials Engineering, Mehran University of Engineering & Technology, Jamshoro, Pakistan
Muhammad Hassan Agheem Center for Pure and Applied Geology, University of Sindh, Jamshoro, Pakistan
Abstract
Liberation size plays a significant role to select a correct and successful concentration method for natural iron ores. This paper aims to evaluate the liberation size of two newly discovered iron ores, namely Zard Koh and Kulli Koh, existing in Chagai region of Pakistan. Zard Koh iron ore is mainly composed of maghemite along with the pyrite, chlorite, grossular and admontite as gangue minerals, whereas, Kulli Koh iron ore is comprised of hematite mostly with quartz, dravite and kaolinite as the gangue minerals. The representative samples of ores were pulverized and sieved to different size fractions. The liberation size of iron bearing minerals and gangues was investigated by analyzing the different size fractions of each ore using XRF (X-Ray Fluorescence), SEM (Scanning Electron Microscope) attached with EDS (Energy Dispersive Spectroscope). The XRF results revealed that the most probable liberation size of Zard Koh and Kulli Koh ores is most likely existing at -75+45 and -150+106 mm, respectively. In order to confirm this liberation size, further evidences were collected using SEM and EDS examinations. It is interesting to note that the results obtained from SEM and EDS were quite in agreement with XRF results.
Publication Details
Page(s) 569-580
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 37, Issue: 4, Year: 2018

Request the full text from PASTIC

References
Rao, 2009.and Geochemistry  of  a  Low  Grade  Iron  Ore  Sample  from Bellary-Hospet  Sector,  India, 8 115 -132
Li, C.,and Gao, Z., “Effect of Grinding Media on the Surface Property and Flotation Behavior of Scheelite Particles”, Powder Technology, Volume 322, 2017.
Abro, M.I., “Assessment of Mesh of Liberation of Dilband Iron Ore, Pakistan”, Mehran University Research Journal of Engineering & Technology, Volume 29, pp. 455-464, Jamshoro, Pakistan, 2010.
Khoso, S.A., “Beneficiation of Zard Koh and Kulli Koh Indigenous Iron Ore Deposits”, M.E. Thesis, Mehran University of Engineering & Technology, Jamshoro, Pakistan, 2016.
Wei, J., Gao, Z., Sun, W., Gao, J.,and Hu, Y., “A Density Functional Theory Study on the Effect of Lattice Impurities on the Electronic Structures and Reactivity of Fluorite”, Minerals, Volume 7, No. 160,2017.
Abro, M.I., Mallah, A.H., and Pathan, A.G., “Mineralogical Characterization of Dilband Iron Ore Deposits of Balochistan, Pakistan”, Mehran University Research Journal of Engineering & Technology, Volume 27, pp. 206-210, Jamshoro, Pakistan, 2008.
Manieh, A.A., “Oolite Liberation of Oolitic Iron Ore, Wadi Fatima, Saudi Arabia”, International Journal of Mineral Processing, Volume 13, pp. 187-192, 1984.
Obassi, E., Gundu, D.T., and Akindele, U., “Liberation Size and Beneficiation of Enyigba Lead Ore, Ebonyi State, South-East Nigeria”, Journal of Mineral and Material Characterization Engineering, Volume 3, pp. 125-133, 2015
Upadhyay, R., Venkatesh, A., and Roy, S., “Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation: Characteristics of Indian Iron Ores”, Resource Geology, Volume 60, pp. 203-211, 2010
Omran, M., Fabritius, T., and Mattila, R., “Thermally Assisted Liberation of High Phosphorus Oolitic Iron Ore: A Comparison Between Microwave and Conventional Furnaces”, Powder Technology, Volume 269, pp. 7-14, 2015.
Ulusoy, U., and Kursun, I., “Comparison of Different 2D Image Analysis Measurement Techniques for the Shape of Talc Particles Produced by Different Media Milling”, Mineral Engineering, Volume 24, pp. 91-97, 2011.
Krishna, S., Patil, M., and Rudrappa, C., “Characterization and Processing of Some Iron Ores of India”, Journal of Industrial Engineering, Volume 94, pp. 113-120, India, 2013.
Muwanguzi, A.J., Karasev, A., and Byaruhanga, J.K., “Characterization of Chemical Composition and Microstructure of Natural Iron Ore from Muko Deposits”, Journal of International Scholarly Research Notices: Material Science, pp. 1-9, 2012
Ogwuegbu, M., Onyedika, G., and Hwang, J.Y., “Mineralogical Characterization of Kuru Cassiterite Ore by SEM-EDS, XRD and ICP Techniques”, Journal of Mineral and Material Characterization Engineering, Volume 10, pp. 855-863, 2011
0

Citations

0

Downloads

36

Views