In Saudi Arabia in most of the cities the street lighting and fence lighting in powerhouses is fed by two phase wires (i.e. no neutral wire is utilized). This queer aspect poses some special problems. Normal methods which are used for ascertaining the line currents in the case of star connected 3-phase 4 wire systems (with balanced loads) cannot be used. Some special methods are used to find out line currents. These line currents are essentially required to calculate proper cable sizes. There are various methods (e.g. Millman’s theorem etc.) for the solution of unbalanced loads but another simple approach to the problem is followed in this paper and the requisite line currents are determined.