No Detail Found!

Effects of the length of jet grouted columns and soil profile on the settlement of shallow foundations.

Author(s)
Zaheer Ahmed Almani Department of Civil Engineering, Mehran University of Engineering & Technology Jamshoro, Pakistan
Ashfaque Ahmed Memon Department of Civil Engineering, Mehran University of Engineering & Technology Jamshoro, Pakistan
Naeem Aziz Memon Department of Civil Engineering, Mehran University of Engineering & Technology Jamshoro, Pakistan
Abstract
In this paper, the effect of length of jet grouted columns and varying soil profile under shallow foundations of buildings constructed on the liquefiable ground was studied. The isolated shallow footing pad which supports a typical simple frame structure was constructed on the liquefiable ground. This ground was reinforced with jet grouted column rows under the shallow foundations of structure. The system was modeled as plane-strain using the FLAC 2D (Fast Lagrangian Analysis of Continua) dynamic modelling and analysis code. This case focuses on the length of jet grouted columns in a soil profile and the effect of soil profiles of varying thickness on the settlements of building structure when the soil is liquefied during an earthquake. The results show that liquefaction-induced large settlements of shallow foundation of building decrease to tolerable limits with the increase in the length of columns. For soil profiles, with a relatively thinner liquefiable layer, a certain minimum length of columns (extended in base non liquefiable layer) is required to meet the settlement tolerable limits. For soil profiles, with a relatively thicker liquefiable layer, this length should be equal to the thickness of the liquefiable layer from the footing base plus some extension in the base non liquefiable dense layer. In the soil profile with the base liquefiable layer underlying the non liquefiable layer, settlements could not be reduced to the tolerable limits even with columns of relatively larger length which may be critical.
Publication Details
Page(s) 517-528
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 31, Issue: 3, Year: 2012

Request the full text from PASTIC

0

Citations

0

Downloads

60

Views