No Detail Found!

Practical application of current converters in DC servomotors used as feed drives for machine tools.

Author(s)
Tameez-Ud-Din Aslam Pakistan Atomic Energy Commission, Islamabad, Pakistan
Ahmad Khalil Khan Electrical Engineering Department, University College of Engineering, Taxila, Pakistan
Abstract
In practical application today, the current control circuits used have transistors and thyristors. The DC voltage supplied to the servo motor is generated by the standard three phase AC lines, but is adjusted for amplitude and polarity by the appropriate circuit arrangement and control. The speed regulation, current regulation, or current limit precede the control and power sections. Circulating current-conducting and circulating current-free circuits are common types of thyristor circuits. Circulating current-conducting have the better dynamic behaviour. Here the motor current can be increased rapidly, so that the speed change requirement can be quickly controlled. The delay time in the current converter is short. Circulating current-free current converters need a command stage which depending on the polarity of the torque requirements enables either one or the other part of the current controller. The current- free circuits have modest requirements on transformer and reactors so that they can be compactly and economically built into feed drives. Circuits with circulating-current suppression should also be mentioned. Such current converters combine the good dynamic properties of circulating current conducting-drives, with the low requirements on reactors of the circulating current-free ones.
Publication Details
Page(s) 55-62
DOI DOI not available
Published Journal: Nucleus, Volume: 26, Issue: 3--4, Year: 1989

Request the full text from PASTIC

0

Citations

0

Downloads

28

Views