No Detail Found!

Effect of core material on efficiency of transformer; core material with low magnetostriction.

Author(s)
Abdul Qadeer Qureshi Electrical Engineering Department, NWFP University of Engineering & Technology, Peshawar, Pakistan
Abstract
The performance of a single phase shell Type step down transformer- 230/115 Volt,250 VA with 50 c/s with three different core materials, i. e. Silicon steel (Transformer Grade), Electrical steel (Electrical Grade) and mild steel is described. If thickness of all the three materials is the same then at constant flux density and frequency a considerable improvement in efficiency is obtained by using material of high specific resistivity; i. e. , silicon steel in which there is about 50% of silicon. In electric steel the content of silicon is about 1% while in mild steel there are only some traces of silicon. The content of Silicon in the cast iron and cast steel increases the specific resistivity of the material. Also efficiency is increased by reducing the thickness of the material used in the Transformer.
Publication Details
Page(s) 15-18
DOI DOI not available
Published Journal: Journal of Engineering and Applied Sciences, Volume: 11, Issue: 2, Year: 1992

Request the full text from PASTIC

0

Citations

0

Downloads

165

Views