No Detail Found!

Effect of thermomechanical processes on ferrite grain size.

Author(s)
M. Hamza Metallurgical and Materials Engineering, University of Engineering and Technology, Lahore, Pakistan
L. Ali Metallurgical and Materials Engineering, University of Engineering and Technology, Lahore, Pakistan
M. Ishtiaq Metallurgy and Materials Engineering, College of Engineering and Emerging Technologies, University of Punjab, Lahore, Pakistan
Abstract
Controlled thermomechanical processing is a method of refining ferrite grains which increases the strength of steel without lowering toughness. The present research work deals with the effect of thermomechanical processing on the refinement of ferrite grains. Thermomechanical processing is divided into three stages; simultaneous deformation and recrystallization of austenite grains at high temperature, deformation of austenite grains with partial recrystallization at lower temperature and deformation in two phase region (a+a). The effect of thermomechanical processing was studied on Carbon-Manganese steel during controlled rolling at temperatures of 825 °C, 925 °C and 1025 °C at the austenizing temperature of 1050 °C. Reductions from 10 % to 25 % were achieved at various temperatures. Microscopic studies confirmed the refinement of ferrite grains.
Publication Details
Page(s) 117-124
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 43, Issue: 1, Year: 2015

Request the full text from PASTIC

0

Citations

0

Downloads

46

Views