No Detail Found!

Comparative study of minimum fluidization velocity in 3D atmospheric fluidized bed.

Author(s)
M. Qizilbash NFC Institute of Engineering and Fertilizer Research, Chemical Engineering Department, Faisalabad, Pakistan
S. R. Malik NFC Institute of Engineering and Fertilizer Research, Chemical Engineering Department, Faisalabad, Pakistan
W. A. Khan NFC Institute of Engineering and Fertilizer Research, Chemical Engineering Department, Faisalabad, Pakistan
K Shahzad NFC Institute of Engineering and Fertilizer Research, Chemical Engineering Department, Faisalabad, Pakistan
N. Ali NFC Institute of Engineering and Fertilizer Research, Chemical Engineering Department, Faisalabad, Pakistan
Abstract
Hydrodynamics of fluidized bed is a significant factor in manipulating and analyzing the characteristics of fluidized bed. Fluidization is imparting any fluid either liquid or gas underneath the bed as a result solid particles behaves like a fluid, velocity here will be minimum fluidization velocity. Experiments in current study have been done on different Geldart`s particles group B (local sand) and A (rice husk) materials having densities of 1490 kg / m3 and 567 kg / m3. Particles sizes were preferred to be same for two materials i-e 149 pm for appropriate comparison. In this study different height to diameter (aspect) ratios were used H/D= 0.8, 1, 1.1. Minimum fluidization velocity was determined for these three aspect ratios by measuring pressure drop experimentally and theoretically by using Ergun equation. Two types of tubular assemblies were considered to study the effect of internal tubes on minimum fluidization velocity. 0.7" diameters tube bank having square pitch and triangular pitch were used to investigate the effect of turbulences on minimum fluidization velocity. Results showed that minimum fluidization velocity reduces by placing tubes inside the bed furthermore, fluidization velocity achieves earlier in triangular pitch arrangement of tubes than in square pitch. Changing bed height had no effect on minimum fluidization velocity for both the materials. However, pressure drop increases as aspect ratio is incremented.
Publication Details
Page(s) 79-87
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 43, Issue: 1, Year: 2015

Request the full text from PASTIC

0

Citations

0

Downloads

76

Views