No Detail Found!

Evaluation of drinking water quality parameters in the areas of east - Lahore Pakistan: A case study.

Author(s)
Amir Ikhlaq University of Engineering and Technology, Institute of Environmental Engineering and Research, Lahore, Pakistan
Mosin Kazmi University of Engineering and Technology Lahore KSK Campos, Pakistan
Sajjad Hayder University of Engineering and Technology, Institute of Environmental Engineering and Research, Lahore, Pakistan
Haroon Rashid Mian University of Engineering and Technology, Institute of Environmental Engineering and Research, Lahore, Pakistan
Masooma Rustam University of Engineering and Technology, Chemical Engineering Department, Lahore, Pakistan
Ahmad Waqar Sulheri University of Engineering and Technology, Institute of Environmental Engineering and Research, Lahore, Pakistan
Aneeqa Saeed University of Engineering and Technology, Institute of Environmental Engineering and Research, Lahore, Pakistan
Abstract
Water quality supplies for residents of East Lahore has been investigated and evaluated. For this purpose six sampling locations were selected which includes four sampling points from urban areas and two from the rural areas. Samples from the urban areas were collected from tube well which is connected to filter plant and also samples have been collected from three house connections of that area (tap water). For the assessment of water quality of the rural areas, samples were taken from three house connections (tube wells) of each sampling point. Physical characterizations (turbidity and pH), chemical characterizations (hardness, total dissolved solids, sulfates, chlorides) and biological parameters (total coliform and fecal coliform) were tested and compared with National Standards for Drinking Water Quality (NSDWQ). The results demonstrated that physical parameters provide almost satisfactory status. However, minor issue of hardness and turbidity were found. At consumer end, of the samples of location T1HC and T4HC were found, bacteriologically contaminated; hence compulsory chlorination is recommended. Currently in these areas, people are using bores having maximum depth of 150 feet which causes physiochemical contamination.
Publication Details
Page(s) 41-61
DOI DOI not available
Published Journal: Journal of Faculty of Engineering and Technology, Volume: 21, Issue: 3, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

60

Views