No Detail Found!

Actinometric determination of UV-radiation in wet-tube electrostatic precipitator (WESP).

Author(s)
M. S. Tahir Department of Chemical Engineering University of Gujrat, Pakistan
M. Saleem Institute of Chemical Engineering & Technology, University of the Punjab, Lahore, Pakistan
S. Gul University of Engineering & Technology, Peshawar, Pakistan
W. A. Khan NFC Institute of Engineering and Fertilizer Research, Faisalabad, Pakistan
N. Ahmad National Textile University, Faisalabad, Pakistan
M. Siebenhofer Department of Chemical Engineering, TUG, Graz, Austria
Abstract
This paper presents the results of investigation of emission of UV-radiation and the impact of high intensity corona discharge (photon) on actinometric conversions with WESP equipped with brush discharge electrodes. Experimental investigations were conducted according to a procedure followed in literature [1, 2]. Experimental investigations were conducted to determine UV-radiation at various applied voltage (kV) and impact of radiation intensity on chemical conversion of 0.6 M potassium iodide (KI) and 0.1 M potassium iodate (KIO ) in 0.01 M borax (Na B O .10H O) for formation of tri-iodide was recorded. WESP equipped with brush 3 24 7 2 discharge electrode produces a suitable intensity of UV-radiation at = 254 nm. A brush-tube electrostatic precipitator at specific operation conditions was used for actinometric conversions and tri-iodide formation was recorded. UV-radiation of = 254 nm was confirmed with spectrophotometer and validated with the Rahn Actinometer. The capability of WESP (equipped with brush discharge electrodes) for UV-radiation was evaluated. Degradation of pollutants in waste water like acetone and phenol was also confirmed [3].
Publication Details
Page(s) 133-143
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 42, Issue: 2, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

152

Views