The goal of transportation is generally stated as the safe and efficient movement of people and goods. In order to achieve this goal designers use many techniques. One of the most suitable techniques used to improve safety on roadway is to check and verify the consistency of the geometric design. Since last decade the concept of design consistency has emerged very widely all over the world in general, and in North America and some European countries in particular. However, no research has been found reported to date in Pakistan for design consistency. The most common parameter for the evaluation of design consistency is through the use of operating speed. Therefore, modeling operating speed on highway alignment is a very important step in the overall efforts to implement design consistency in the design process. The choice of operating speed is related to driver behavior that differs from one location to the other. Along with geometric features the operating speed is also affected by pavement and traffic conditions, climatic/weather conditions which vary from country to country and state to state. Therefore operating speed prediction model developed in one country might not be applicable in other parts of the world. Considering our local traffic conditions, the driver behavior and other environmental factors, it is imperative to develop such models for Pakistan. This paper presents the development of three operating speed prediction models. These models are based on the real speed data which is collected in the field, i.e. on two lane two-way rural roads. Statistical tests are conducted for the development of models and good correlation is achieved.