No Detail Found!

Assessment of Surface Roughness and Early Bacterial Adhesion on Machined, SLA, Anodized and Laser-Modified Titanium Implant Surfaces: An In-Vitro Study

Author(s)
Anas Abdul Khader Department of Periodontology and Implant Dentistry, College of Dentistry, Qassim University, Kingdom of Saudi Arabia
Abstract
Background: Implant surface characteristics influence both osseointegration and early microbial colonization. The present in-vitro study compared machined, sandblasted and acid-etched (SLA), anodized and laser-modified titanium surfaces to determine how different modification protocols affect roughness and 24-hour bacterial adhesion. Methods: Eighty commercially pure titanium grade 4 discs were randomly allocated to four groups (n = 20 each): machined, SLA, anodized and laser-modified. Surface characterization was performed using optical profilometry (Ra, Rz, Rq, Rsk and Rku) and scanning electron microscopy. Early bacterial adhesion at 24 hours was assessed using Streptococcus mutans under aerobic conditions and Porphyromonas gingivalis under anaerobic conditions. Colony-forming units (CFU/mm²) and fluorescence microscopy coverage percentages quantified adhesion. One-way ANOVA, Tukey post-hoc testing and Pearson correlation analysis were applied at a significance level of p<0.05. Results: SLA surfaces exhibited the highest roughness (Ra 2.34±0.28µm), followed by laser-modified (1.87±0.23µm), anodized (1.12±0.18µm) and machined surfaces (0.43±0.09µm) (p<0.001). SLA also showed the greatest bacterial adhesion. Compared with SLA, laser-modified surfaces demonstrated approximately 38.2% lower S. mutans counts and 38.8% lower P. gingivalis counts despite remaining moderately rough. Strong positive correlations were observed between Ra and bacterial adhesion parameters (r = 0.80-0.85; p<0.001). Conclusion: Surface modification protocols significantly influence both roughness and early bacterial adhesion on titanium. Within the limitations of this 24-hour singlespecies in-vitro model, laser-modified surfaces showed a favourable balance between moderate roughness and lower bacterial adhesion than SLA surfaces and therefore appear promising rather than definitive for future implant surface design.
Publication Details
Page(s) 94-98
Published Journal: Journal of Pioneering Medical Sciences, Volume: 15, Issue: s1, Year: 2026

Request the full text from PASTIC

Keywords
Dental Implants, Osseointegration, Bacterial Adhesion, SLA, Laser Surface Modification, Titanium, Anodization, surface roughness
References
Brånemark P.I. .1977 .Osseointegrated Implants in the Treatment of the Edentulous Jaw: Experience from a 10-Year Period. Scandinavian Journal of Plastic and Reconstructive Surgery Supplement, 16 : 1-132.
Albrektsson T.,P.I. Brånemark. T. . .Osseointegrated titanium implants: requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. ” Acta Orthopaedica Scandinavica, 52(1981) : 155-170.
Guéhennec Le,L. Le .2006 .Surface treatments of titanium dental implants for rapid osseointegration. ” Dental Materials, 06(2007) : 844-854.
Junker R. .2009 .Effects of implant surface coatings and composition on bone integration: a systematic review. ” Clinical Oral Implants Research, 01777(2009) : 0501-206.
Wennerberg A,Albrektsson T. .2009 .Effects of titanium surface topography on bone integration: a systematic review. ” Clinical Oral Implants Research, 01775(2009) : 0501-184.
Ehrenfest Dohan,D.M. Dohan .2009 .Classification of osseointegrated implant surfaces: materials, chemistry and topography. , 12(2010) : 198-206.
Wennerberg A,Albrektsson T. . .Suggested guidelines for the topographic evaluation of implant surfaces. International Journal of Oral and Maxillofacial Implants, 15(2000) : 331-344.
Shalabi M.M. . .Implant surface roughness and bone healing: a systematic review. ” Journal of Dental Research, 85(2006) : 496-500.
Derks J,Tomasi C. .2015 .Peri-implant health and disease: a systematic review of current epidemiology. ” Journal of Clinical Periodontology, 16(suppl) : S158-S171.
Heitz-Mayfield L.J. and N.P.,Lang L.J. and N.P. .2010 .Comparative biology of chronic and aggressive periodontitis vs peri-implantitis. ” Periodontology, 00348 : 0757-181.
Busscher H.J. . .Biofilm formation on dental restorative and implant materials. ” Journal of Dental Research, 89(2010) : 657-665.
Subramani K. . .Biofilm on dental implants: a review of the literature. International Journal of Oral and Maxillofacial Implants, 24(2009) : 616-626.
Lindhe J.,Meyle J. .2008 .. diseases: consensus report of the Sixth European Workshop on Periodontology.” Journal of Clinical Periodontology, 01283 : 1600-051X.
Heuer W. .2006 .Analysis of early biofilm formation on oral implants in man. ” Journal of Oral Rehabilitation, 01675(2007) : 2842-382.
Cunha A. .2015 .Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation. ” Applied Surface Science, 10 : 485-493.
Buser D. . .Influence of surface characteristics on bone integration of titanium implants: a histomorphometric study in miniature pigs. ” Journal of Biomedical Materials Research, 25(1991) : 889-902.
Cochran D.L. .2002 .The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface. Clinical Oral Implants Research, 130204(2002) : 0501-153.
Faeda R.S. . .Evaluation of titanium implants with surface modification by laser beam: biomechanical study in rabbit tibias. ” Brazilian Oral Research, 23(2009) : 137-143.
Coelho P.G. . .Basic research methods and current trends of dental implant surfaces. ” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 31264(2009) : 579-596.
Sul Y.T. . .Characteristics of the surface oxides on turned and electrochemically oxidized pure titanium implants up to dielectric breakdown. ” Biomaterials, 9612(01) : 00131-4.
Teughels W. .2006 .Effect of material characteristics and/or surface topography on biofilm development. ” Clinical Oral Implants Research, 01353(2006) : 0501-81.
Ren N. .2018 .Materials for Biological Applications. , 06 : 84-91.
Fürst M.M. .2007 .Bacterial colonization immediately after installation on oral titanium implants. ” Clinical Oral Implants Research, 01381(2007) : 0501-508.
Schmidlin P.R. .2011 .Effects of different surface decontamination and microtopography on microbial colonization of titanium. ” Clinical Oral Implants Research, 02357(2013) : 0501-44.
Heitz-Mayfield L.J. .2008 .Peri-implant diseases: diagnosis and risk indicators. ” Journal of Clinical Periodontology, 01275 : 1600-051X.
Gristina A.G. .1987 .Biomaterial-centered infection: microbial adhesion versus tissue integration. ” Science, 237(4822) : 1588-1595.
Vorobyev C.,Guo C. . .Direct femtosecond laser surface nano/microstructuring and its applications. ” Laser and Photonics Reviews, 7(2013) : 385-407.
Ren P. .2015 .Materials for Biological Applications. , 09 : 1027-1032.
Yao C.,Webster T.J. .2006 .Anodization: a promising nanomodification technique of titanium implants for orthopedic applications. ” Journal of Nanoscience and Nanotechnology, 447(9-10) : 2682-2692.
Sul Y.T. . .Optimum surface properties of oxidized implants for reinforcement of osseointegration. International Journal of Oral and Maxillofacial Implants, 20(2005) : 349-359.
Rupp F. .2017 .Surface characteristics of dental implants: a review. ” Dental Materials, 09(2018) : 40-57.
Díaz P. .2022 .What is the prevalence of peri-implantitis? A systematic review and meta-analysis. ” BMC Oral Health, 22 : 449.
Martínez-Hernández M. .2023 .Salivary pellicle modulates biofilm formation on titanium and enamel surfaces. ” Clinical Oral Investigations, : .
Yu J. . .Antibacterial adhesion strategy for dental titanium implant surfaces. ” Bioengineering, 13(2022) : 169.
0

Citations

0

Downloads

15

Views