No Detail Found!

An experimental investigation of copper recovery from tailings

Author(s)
Shahrukh Hassan Department of Chemical Engineering, University of Engineering and Technology Peshawar,,Pakistan
Naveed ul Hasan Syed Department of Chemical Engineering, University of Engineering and Technology Peshawar,,Pakistan
Naseer Ahmed Khan Department of Chemical Engineering, University of Engineering and Technology Peshawar,,Pakistan
Imran Khan Rind National Centre of Excellence in Analytical Chemistry, University of Sindh,Jamshoro, Pakistan
Najma Memon National Centre of Excellence in Analytical Chemistry, University of Pakistan
Abstract
The main objective of this research work is to discuss the global demand of copper that generates untamed mining yielding vast volumes of flotation tailing, which contain economically feasible volumes of copper. Not only does such tailings amount to wasting a precious material, but it is also hazardous to the environment when it is disposed of. The following paper discusses a hydrometallurgical process in order to extract residual copper in this type of tailings. The ore is first treated with a traditional beneficiation process consisting of crushing, grinding to a 63 µm diameter and froth flotation in the presence of sodium amyl xanthate as collector and sodium silicate as gangue depressant to yield a primary copper concentrate. The remaining tailings, at which the percent remaining of Cu is = 2% are acid leached. In a representative experiment tailings (100 g) were shaken with 100 mL of 1 M H2SO4 at 60 °C after 2, 4 and 6 h to permit the production of a copper-enriched leachate. The recrystallized solution was further recrystallized to concentrate the dissolved Cu and a redox cementation step was followed by adding metallic iron to the filtered leachate. Visual evidence that cementation took place was observed by the development of gases, changing color and copper metallization of the iron base. The metallic copper deposited was confirmed by the use of energy-dispersive X-ray (EDX) spectroscopy. The results reveal a feasible second path of recovery that employs the balance of copper in the flotation tailing and thereby improves a superior utilization of the accessible resources and fewer impacts of the primary treatment of the mineral.
Publication Details
Page(s) 1-1
DOI DOI not available
Published Journal: SPI-2026: Abstract book on 7th International Conference on Sustainability in Process Industry (SPI-2026), February 9-10, 2026, Volume: 1, Issue: 1, Year: 2026

Request the full text from PASTIC

Keywords
Flotation process, Tailings, Acid leaching, Leachate solution, Copperore
0

Citations

0

Downloads

12

Views