No Detail Found!

The impact of steam curing temperature and duration in increasing the compressive strength of geopolymer concrete

Author(s)
Rachmansyah Department of Civil Engineering, Krida Wacana Christian University,Jakarta,Indonesia
Harianto Hardjasaputra Department of Civil Engineering, Pembangunan Jaya University,Banten,Indonesia
Claudia Patty Department of Civil Engineering, Krida Wacana Christian University,Jakarta,Indonesia
Abstract
One of the important steps in the production of geo-polymer concrete is the curing process, because temperature and duration of curing affect the compressive strength of the geo-polymer concrete. This study aims to determine the effect of steam curing temperature and duration on the compressive strength of geo-polymer concrete. All concrete specimens are cylinders with diameter of 15 x 30 cm cured with the steam. The steam temperatures will be controlled from 60 °C, 70 °C, 80 °C, 90 °C and 100 °C and the duration of curing will vary1 hour to 4 hours. In order to have the normal concrete strength the authors used the mix design of geo-polymer concrete based on the activator solution consist of Sodium Hydroxide (NaOH) 6 Molarity and Sodium Silicate gel (Na2SiO3). The specimens were tested for compressive strength test at the age of 28 days. It can be concluded that the right steam curing method and equipment could increase the compressive strength of geo-polymer concrete up to 100 % compared the concrete specimens cured in the room temperature.
Publication Details
Page(s) 767-771
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 17, Issue: 7, Year: 2022

Request the full text from PASTIC

Keywords
Fly Ash, steam curing, concrete compressive strength, Geo-Polymer Concrete
References
Rangan B. Vijaya .2010 .Fly Ash-Based Geo-polymer Concrete. Proceedings of the International Workshop on Geo-polymer Cement and Concrete, : 68-106.
Davidovits J. .1991 .Geo-polymers: inorganic polymeric new materials. Journal of Thermal Analysis and calorimetry, 37(8) : 1633-1656.
Davidovits J. .2002 .Geo-polymer Institute Saint-quentin (France), Melbourne (Australia).. In Geo-polymer 2002 Conference, 28 : 29.
Hanjitsuwan S.,Hunpratub S.,Thongbai P.,Maensiri S.,Sata V.,Chindaprasirt P. .2014 .Effects of NaOH concentrations on physical and electrical ash geo-polymer concrete. Journal of materials in civil engineering, 27(7) : 04014198.
Hardjasaputra H.,Cornelia M.,Gunawan Y.,Surjaputra I. V.,Lie H. A.,Ng Pranata,G. Pranata .2019 .Study of mechanical properties of fly ash-based geo-polymer concrete. IOP Conference Series: Materials Science and Engineering, 615(1) : .
Hardjasaputra H.,Ekawati E.,Victor Cornelia M. . .Evalution of High Strength Fly Ash Based Geo-polymer Concrete Technology with Steam Curing. Malaysian Construction Research Journal: Special, 6 : .
Hardjasaputra H.,Esteriana E. .2018 .Research of Geo-polymer Concrete Mix Design based on Suralaya-Banten Electric Steam Power Fly Ash, Compressive and Flexural Tension Strength. Jurnal Ilmiah Teknik Sipil Udayana, 22(1) : .
Kumar S.,Djobo J. N. Y.,Kumar A.,Kumar S. .2016 .Geo-polymerization behaviour of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 : 172-178.
Madeleine. R. .2012 .Emissions from the Cement Industry. , : .
Rachmansyah. Hardjasaputra H ,Cornelia M. .2019 .Experimental study of effect additional water on high performance geo-polymer concrete. MATEC Web of Conferences, 270 : 01004.
Rajamane N. P.,Jeyalakshmi R. .2014 .Quantities of sodium hydroxide solids and water to prepare sodium hydroxide solution of given molarity for geopolymer concrete mixes. The Indian Concrete Journal Aug-Sep., : .
Rangan B. V.,Hardjito D.,Wallah S. E.,Sumajouw D. M. .2005 .June. Studies on fly ash-based geo-polymer concrete. In Proceedings of the World Congress Geo-polymer, Saint Quentin, 28 : 133-137.
Shayan A. .2016 .Specification and use of geopolymer concrete in the manufacture of structural and nonstructural components: review of literature (No. , : APT318.
Topark-Ngarm P.,Chindaprasirt P.,Sata V. .2014 .Setting time, strength, and bond of high-calcium fly. , : .
Yewale V. V.,Shirsath M. N.,Hake S. L. .2016 .Evaluation of Efficient Type of Curing for Geopolymer Concrete. Evaluation, 3(8) : .
0

Citations

0

Downloads

8

Views