No Detail Found!

Design and simulation of an orbit (Attitude) controller for s satellite.

Author(s)
Shahab Khushnood MED, University of Engineering and Technology, Taxila, Pakistan
Sajid Bashir MED, University of Engineering and Technology, Taxila, Pakistan
Muhammad Babar Nazir MED, University of Engineering and Technology, Taxila, Pakistan
Abstract
Satellite attitude is the orientation of the defined body coordinates with reference to some external reference frame. A satellite must maintain specified attitude while in orbit to allow precise pointing of communication instruments and antenna towards the earth to perform specific operation. But the satellite receives interference from Earth gravitational and magnitude fields, which will disturb the attitude. So it is mandatory to control the attitude of the satellite. The main objective of the research work is to design and simulate the controller for attitude dynamics of satellite. Abacus satellite in geosynchronous orbit is considered for system design and analysis. Mathematical model of satellite is made assuming the satellite as rigid body. Inertial coordinate system is used as a reference frame and Euler angle formulation is made for attitude equation of motion. Control system design was made by using the position-plus-rate (PD) control logic for pitch attitude dynamics of Abacus satellite. Step response plots of the system under different conditions, using PD and PID control logics, are obtained to analyze the system performance. Root locus plot for different cases are obtained to discuss the system stability. For stability analysis Routh Hurwitz criteria is used. Typical data used for design analysis and Simulation is obtained from NASA report (NASA / TM-2001-210854.June 2001). MATLAB 6.5 is used for simulation of the system.
Publication Details
Page(s) 58-74
DOI DOI not available
Published Journal: Technical Journal, Volume: 17, Issue: 0, Year: 2006

Request the full text from PASTIC

0

Citations

0

Downloads

80

Views