Pavement structure is subjected to moving traffic loads of repetitive nature, and each repetition causes a certain amount of damage to the pavement. The extent of damage to a pavement structure mainly depends on the pavement material, specifications and design procedure in addition to load. Inadequate design and substandard specifications results in poor structural and functional performance of a pavement and eventually the pavement fails well before its design life. Presently about 25 design procedures are available throughout the World and there is no Universal agreement amongst engineers as to which design procedure is the “best”. Even in developing countries, it has been observed that, the pavement design methods and construction specifications of another country are being adopted without giving due weightage to objective realities and local environmental conditions. Keeping in view the above, a comparative study was conducted and presented in this paper on material specifications and design procedures, of Flexible Pavements of some selected countries in order to propose different measures to improve the performance of roads in these countries. The study reveals that the existing design procedures are required to be updated in order to meet the new demands of increased population growth rate and traffic conditions. It was also concluded to adopt some similar approach for those countries that has geographical resemblance, e.g. Pakistan has comparable local soil conditions and climate to India and Nepal. The mode of pavement failures seems to be similar and it would be much beneficial if these countries work together to overcome the problems by undertaking joint research program in order to develop design procedures and material specifications suiting local environmental conditions. Full scale trial sections are required to be constructed on the basis of outcome of the research in order to verify the proposed specifications under actual traffic loading and environmental conditions.