No Detail Found!

Effect of shear span, concrete strength and stirrup spacing on behavior of pre-stressed concrete beams.

Author(s)
Saeed Ahmad Department of Civil Engineering, University of Engineering & Technology, Taxila, Pakistan
Imran Ali Bukhari Department of Civil Engineering, University of Engineering & Technology, Taxila, Pakistan
Abstract
The shear strength of pre-stressed concrete beams is one of the most important factors to be considered in their design. The available data on shear behavior of pre-tensioned pre-stressed concrete beam is very limited. In this experimental study, pre-tensioned prestressed concrete I-beams are fabricated with normal and high strength concretes, varying stirrup spacing and shear span-to- depth ratios. Twenty one I-beam specimens that are 300 mm deep and 3745-4960mm long are tested up to failure while deflections, cracking pattern, cracking and failure loads were recorded. The research results are compared with ACI 318-02 and Structure Analysis Program “Response 2000”. It was observed that with the decrease in concrete strength, failure mode of prestressed concrete beams changes from flexure shear to web shear cracking for values of shear span-to-depth ratio less than 4.75. Increase in stirrup spacing decreased the effectiveness of stirrups in transmitting shear across crack as a result of which failure mode is changed to web shear cracking especially for beams with lower values of shear span-to-depth ratios. ACI code underestimates the shear carrying capacity of prestressed concrete beams with lower values of shear span-to-depth ratios. Response 2000 can be used more effectively in predicting shear behavior of normal strength prestressed concrete beams.
Publication Details
Page(s) 277-286
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 26, Issue: 4, Year: 2007

Request the full text from PASTIC

0

Citations

0

Downloads

32

Views