No Detail Found!

Development of a repeatable single-droplet generator using a step motor and PWM control of a two-way solenoid valve

Author(s)
Min Ki Bae Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology,Seoul,Korea
Choong Hoon Lee Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology,Seoul,Korea
Abstract
A device capable of repeatedly generating a single droplet was developed. A piston pushes the liquid into a cylinder, creating droplets that are emitted from the nozzle outlet. A one-dimensional linear stage connected to a stepper motor was used for piston displacement. To repeat the generation of single droplets, a method that consists of generating droplets, supplying liquid into the cylinder, and blocking the inflow of external air through the nozzle outlet during the process of supplying liquid into the cylinder was developed. To prevent the inflow of external air into the cylinder through the nozzle outlet, a two-way solenoid valve was installed in the supply passage between the cylinder and the reservoir holding the liquid supply. The sudden opening of the two-way solenoid valve is prevented by PWM (pulse width modulation) control of the current supplied to the solenoid, and the air inflow into the cylinder through the nozzle outlet can be successfully blocked by this method. PWM control of the driving current in the solenoid enabled the repeated generation of single droplets. A single-droplet-generation experiment was repeatedly conducted while varying the nozzle diameter and the hydraulic head difference Dh between the nozzle outlet and the liquid reservoir. The ratio of the droplet diameter to the nozzle diameter was 5.45 with a nozzle diameter of 0.23 mm and convergence to 2.1 with an increase in the nozzle diameter to 1.51 mm. When repeated measurements were taken under fixed experimental conditions, the droplet diameter deviation % (=stdev/average*100) showed a distribution of 1 ~ 6%.
Publication Details
Page(s) 1134-1140
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 17, Year: 2024

Request the full text from PASTIC

Keywords
Pulse width Modulation, step motor, two-way solenoid valve, repeatable droplet generation, single droplet generation
References
Dong H.,Carr W. W.,Morris J. F. .2006 .An experimental study of drop-on-demand drop formation. PHYSICS OF FLUIDS, 18 : 072102.
Liu Z.,Reitz R. D. .1997 .An analysis of the distortion and breakup mechanisms of high-speed liquid drops. International Journal of Multiphase Flow, 23 : 631-650.
Lee C. H.,Reitz R. D. .2000 .An experimental study of the effect of gas density on the distortion and breakup mechanism of drops in high-speed gas stream. International Journal of Multiphase Flow, 26 : 229-244.
Mundo C.,Sommerfeld M.,Tropea C. .1995 .Droplet-wall collisions: experimental studies. International Journal of Multiphase Flow, 21 : 151-173.
Orme M. .1997 .Experiments on droplet collisions, bounce, coalescence and disruption, Prog, Energy Combust. , 23 : 65-79.
Jiang Y. J.,Umemura A.,Law C. K. .1990 .An experimental investigation on the collision behavior of hydrocarbon droplets. Journal of Fluid Mechanics, 234 : 171-190.
Calvert P. .2001 .Inkjet printing for materials and devices. Chem. Mater, 13 : 3299-3305.
Creagh T.,McDonald M. .2003 .Design and performance of inkjet print heads for non-graphic-arts applications. MRS Bulletin, 28 : 807-811.
J. de Gans B.,Duineveld P. C.,Schubert U. S. .2004 .Inkjet printing of polymers: State of the art and future developments. Advanced Materials, 16 : 203-213.
Xu Q.,Basarana O. A. .2007 .Computational analysis of drop-on-demand drop formation. Physics of Fluids, 19 : 102111.
Zoltan S. I. .1972 .Pulsed droplet ejection system, U. , 3(683) : 212.
Kyser E. L.,Sears S. B. .1976 .Method and apparatus for recording with writing fluids and drop projection means therefore. , 3(946) : 398.
Lemke R. E.,Hieftje G. M. .1982 .A new directly computer-controlled pH-stat. Analytica Chimica Acta, 141 : 173-186.
Schneider J. M.,Hendricks C. D. .1964 .Source of Uniform-Sized Liquid Droplets. Review of Scientific Instruments, 35 : 1349-1350.
J. M. Schneider N. R.,Lindblad C. D.,Hendricks J. M.,Crowley J. M. .1967 .Stability of an Electrified Liquid Jet. Journal of Applied Physics, 38 : 2599-2605.
D. M. Harris J. W. M.,Bush J. W. M. .2015 .A low‑cost, precise piezoelectric droplet‑on‑demand generator. , : .
Exp . .. , 56 : 83.
Sadeghian H.,Hojjat Y.,Ghodsi M.,Sheykholeslami M. R. .2014 .An approach to design and fabrication of a piezo-actuated microdroplet generator. International Journal of Advanced Manufacturing Technology, 70 : 1091-1099.
Albadia Y.,Zhang Y. .2020 .A versatile droplet on demand generator based on active pressure control. Review of Scientific Instruments, 91 : 125005.
0

Citations

0

Downloads

37

Views