No Detail Found!

An investigation mechanical properties of areca fiber composite material

Author(s)
M. Rajesh Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology,Avadi, Chennai, Tamil Nadu,India
K. Balaji Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology,Avadi, Chennai, Tamil Nadu,India
Abstract
In contrast with the past natural fibers derived from renewable resources have the potential to replace glass, carbon, and other man-made fibers in polymer composites as a reinforcing material. The research emphasis is on the study of areca fiber and areca trunk husk with Araldite LY556 epoxy resin with hardener HY-951 in a 10:1 ratio and polyester Iso resin with hardeners accelerator and catalyst. Where for 1 kilogram of polyester Iso resin 20 grams of accelerator and 15 grams of catalyst should be taken for the complete composition of fiber materials. Four laminated sheets are fabricated according to ASTM standards. Two different laminate sheets are fabricated in which two contain areca trunk husk in their resin and the other two do not contain in its resin. This fabrication process is done by using the hand layup process and the press molding process. The mechanical properties of laminated sheets are tested by conducting compression, tensile, impact, and hardness tests. Laminates with optimal mechanical properties are suggested for future applications.
Publication Details
Page(s) 893-903
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 14, Year: 2024

Request the full text from PASTIC

Keywords
Mechanical properties, hand layup process, areca trunk husk
References
Ashok R. B.,Srinivasa C. V.,Basavaraju B. .2018 .A review on the mechanical properties of areca fiber reinforced composites. Science and Technology of Materials, 05(2) : 120-130.
Devi Dr. S. Yamuna,Paper ID .2019 .Investigation of Physical, Chemical, and Structural Characterization of Areca Catechol Fiber. International Journal of Science and Research (IJSR), 8(8) : ART2020364.
Srinivasa C. V.,Bharath K. N. . .Impact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites. Mater. Environ. Sci, ISSN, : 2028-2508.
Kumar G. C. Mohan .2008 .July 2 - 4. IIWCE, : 978-988.
Sangeetha Devaki .2017 .Examining the Surface Effect on Areca Catechu by Different Retting Methods and the Effect of Enzyme and Alkali Treatment with the Help of SEM Analysis. World Wide Journal of Multidisciplinary Research and Development, WWJMRD, 3(11) : 143-148.
Dinakaran Kishore,Ramesha Harish .2019 .Development and characterization of areca fiber reinforced polymer composite. Science Direct Materials Today: Proceedings, 18 : 934-940.
Kumar Gudapati S. P.,Supraja K. .2018 .Thermal Conductivity Characterization of Areca Palm Fiber Reinforced Polymer Composites. International Journal of Pure and Applied Mathematics, 119(17) : 1871-1880.
Desai R. H,Shridhar Dr. T.N. .2019 .Fabrication and Performance of Areca Short Fiber Polypropylene Composite at Varying Fiber Loading. International Journal of Recent Technology and Engineering, (1S2) : 2277-3878.
Padmaraj N. H.,Kinib M. Vijay,Pabi B. Raghuvir,Shenoy B. Satish .2013 .Development of Short Areca Fiber Reinforced Biodegradable Composite Material. International Conference on DESIGN AND MANUFACTURING, : .
Venkatesh D. R.,Rajkumar D. R. .2019 .The influence of natural powders with carboxy methyl cellulose on mechanical and physical properties of laminated plate 06(04. , : 2395-0072.
Chetty Nagaraj,Reddy J. Durga Prasad .2020 .Estimation of tensile properties of fabricated multi-layered natural jute fiber reinforced E-glass composite material. Materials Today: Proceedings., : .
Vishal Gadgihalli,Babitha Rani H. Gadgihalli .2017 .Analysis of Properties of Concrete Using Sea Shells Crushed Powder as Admixture. International Journal of Research - Granthaalayah, 5(11) : .
Masudul Hassan M.,Zaman Manfred Wagner H.,H. U. Manfred Wagner H.,Khan Mubarak .2010 .Physio-mechanical performance of hybrid betelnut (Areca catechu) Short Fiber/ Seaweed polypropylene composites. J. Nat. Fib, 7 : 165-177.
Murali Mohan Rao. K.,Ratna Prasad,A. V. Prasad,Rao Mohan,K. Mohan,Bamboo Mohan .2011 .Mechanical Properties of natural fiber reinforced polymer composites Jowar, Sisal,. A Journal on Materials and Design, 32 : 4658-4663.
Chikkol Srinivasa,Venkateshappa Srinivasa .2012 .Mechanical Behavior of Areca Fiber Reinforced Epoxy Composites. Advances in Polymer Technology, 31(4) : 319-330.
Jochen Gassan.,Andrzej K.,Bledzki K. .1999 .Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibers; Composites Science. , 59 : 1303-1309.
Nazire Deniz,Yilmaz Deniz .2013 .Effect of chemical extraction parameters on corn husk fibers characteristics. Indian Journal of Fiber & Textile Research, 38 : 29-34.
Varada Rajulu A.,Ganga Devi L. Rajulu A. .2005 .Mechanical Properties of Short, Natural Fiber Hildegardia Populifoliareinforced Styrenated Polyester Composites. Journal of Reinforced Plastics and Composites, 24(4) : .
Rajesh Murkur,Balaji K. .2023 .Evaluation properties of areca fiber reinforced biodegradable composite material, materials today proceedings. , 07 : .
K. L. Pickering M. G.,Aruan Efendy T. M.,Le T. M. .2016 .A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing, 83 : 98-112.
Ravikumar H. B.,Ranganathaiah C. G. N.,Siddaramaiah Kumaraswamy .2005 .Influence of free volume on the mechanical properties of Epoxy/poly (methyl methacrylate) blends. Journal of Materials Science, 40 : 6523-6527.
0

Citations

0

Downloads

80

Views