No Detail Found!

Effect of number of triggers and shape of crash box on energy absorption during experimental collision

Author(s)
Ahmad Yunus Nasution Faculty of Mechanical and Automotive Engineering Technology, University Malaysia Pahang, Pekan, Pahang, Malaysia; Mechanical Engineering Department, Engineering Faculty, Universitas Sumatera Utara, Jl. Dr. T. Mansur, Medan, Sumatera Utara, Indonesia
Mohd Ruzaimi Mat Rejab Faculty of Mechanical and Automotive Engineering Technology, University Malaysia Pahang,Pekan, Pahang,Malaysia
Januar Parlaungan Siregar Faculty of Mechanical and Automotive Engineering Technology, University Malaysia Pahang,Pekan, Pahang,Malaysia
Quanjin Ma Faculty of Mechanical and Automotive Engineering Technology, University Malaysia Pahang,Pekan, Pahang,Malaysia
Abstract
The capacity of passenger car crash boxes to absorb energy during crashes has been the subject of extensive research, which started with the creation of multiple crash box models, changes in crash box filling, and the inclusion of crash box triggers. On the other hand, no research has been done on the combination of axle trigger holes, nine-cell columns, and crash box models. The results of the experiment on the energy-absorbing capacity of AA6061-T4 crash box specimens under compressive loads are presented in this paper. The compression tests were conducted on a Universal Testing Machine with a maximum force capability of 1000 kN and a speed capability of 5 mm/s. Three models are used in crash box modeling. A cross-section of the model with a round hole-shaped trigger variation is included in these three versions. It is established that the hexagonal Frusta type with two holes absorbs the highest energy at 33.30 kJ, and has a displacement of 4.12 mm and a maximum force of 348.5 kN. The energy absorption capacity of the crash box was found to be increased by combining frusta versions of the hexagon model with two holes and nine-cell column filling.
Publication Details
Page(s) 580-592
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 10, Year: 2024

Request the full text from PASTIC

Keywords
crash box, frusta model, nine-cell column, trigger circle
References
Yin H.,Zhang L.,Liu Z.,Fan W.,Wu X.,Wen G. .2022 .Crash analysis and evaluation of a new separate W-beam guardrail on highways using the finite element method. Eng. Struct., 115551 : .
Yang R. .2019 .Safety effects of street lighting on roadway segments: Development of a crash modification function. Traffic Inj, 1573317(3) : 296-302.
Arunakumara P. C.,Sagar H. N.,Gautam B.,George R.,Rajeesh S. .2022 .A review study on fatigue behavior of aluminum 6061 T-6 and 6082 T-6 alloys welded by MIG and FS welding methods. Mater. Today Proc., 08 : 293-301.
Gao D.,Wang S.,Zhang M.,Zhang C. .2021 .Experimental and numerical investigation on in-plane impact behaviour of chiral auxetic structure. Compos. Struct, 113922 : .
Kumar M.,Sidpara A. M.,Racherla V. .2022 .Surface finishing of aluminium 6061 using fabricated flexible abrasive tool. Today Commun, 104614 : .
Nasution A. Y.,M. R. M. Rejab Q.,Ma M. A.,Firmansyah M. A. .2021 .Design optimization of passenger SUV's crash box and bumper beam by using finite element method. IOP Conf. Ser. Mater. Sci. Eng, 1068(1) : 1757.
Zhang H.,Sun Z.,Zhang M.,Shao Y.,Zhu J. .2020 .Comparison of the flow structures and regime transitions between a cylindrical fluidized bed and a square fluidized bed. Powder Technol, 08 : 507-516.
Wesselmecking S.,Kreins M.,Dahmen M.,Bleck W. .2021 .Material oriented crash-box design - Combining structural and material design todoc_improve specific energy absorption. Mater. Des, 110357 : .
Yang M. .2020 .Crashworthiness of hierarchical truncated conical shells with corrugated cores. Int. J. Mech. Sci., 106171 : .
Miguel Encarnação Nunes T.,Calado Marta Eng Luís Miguel Ouro Colaço A.,Szolnoky Ramos Pinto Cunha Supervisor F.,Marta A. Calado .2017 .Multiobjective design optimization of a frontal crash energy absorption system for a road-safe vehicle Aerospace Engineering Examination Committee. , : 30-46.
Raponi E.,Bujny M.,Olhofer M.,Aulig N.,Boria S.,Duddeck F. .2019 .Kriging-assisted topology optimization of crash structures. Comput. Methods, : .
Wang J.,Zhang Y.,He N.,Wang C. H. .2018 .Crashworthiness behavior of Koch fractal structures. Mater. Des, 02 : 229-244.
Frej D.,Jaskiewicz M. .2021 .Test Stand for Experimental Crash Tests at Low Speeds,”. Transp. Res. Procedia, 07 : 1627-1634.
Song Y.,Chitturi M. V.,Noyce D. A. .2021 .Automated vehicle crash sequences: Patterns and potential uses in safety testing. Accid. Anal. Prev, 106017 : .
Wang G.,Zhang Y.,Zheng Z.,Chen H.,Yu J. .2022 .Crashworthiness design and impact tests of aluminum foam-filled crash boxes. Thin-Walled Struct., 109937 : .
Gudisey A.,Magliaro J.,Altenhof W. .2020 .High capacity, adaptive energy absorption under tensile loading conditions utilizing an axial cutting deformation mode. Forces Mech., 100004 : .
Quanjin M.,Salim M. S. A.,M. R. M. Rejab O. E.,Bernhardi A. Y.,Nasution A. Y. .2019 .Quasi-static crushing response of square hybrid carbon/aramid tube for automotive crash box application. in Materials Today: Proceedings, 10 : 683-690.
Huang J.,Bathe K. J. .2020 .Overlapping finite element meshes in AMORE. Adv. Eng. Softw, 102791 : .
Guo L.,Huang H.,Jia C.,Romanov K. .2020 .Axial behavior of square CFST with local corrosion simulated by artificial notch. J. Constr. Steel Res., 106314 : .
Ferdynus M.,Szklarek K.,Kotełko M. .2022 .Crashworthiness performance of thin-walled hollow and foam-filled prismatic frusta, Part 2: Experimental study. Thin-Walled Struct., 110070 : .
Rogala M.,Gajewski J. .2023 .Crashworthiness Analysis of Thin-Walled Square Columns with a Hole. , : .
Pang T.,Fang J.,Ruan D.,Sun G. .2019 .Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading. Eng, 04 : .
Jiang B. .2019 .Numerical, theoretical, and experimental studies on the energy absorption of the thin-walled structures with bio-inspired constituent element. Int. J. Mech. Sci., 105173 : .
C. H. Zhou B.,Wang H. Z.,Luo Y. W.,Chen Q. H.,Zeng S. Y.,Zhu S. Y. .2017 .Quasi-Static Axial Compression of Origami Crash Boxes. Int. J. Appl. Mech., 9(5) : .
Maier K.,Klünsner T.,Krobath M.,Tritremmel C.,Marsoner S.,Czettl C. .2020 .Uniaxial step loading test setup for determination of creep curves of oxidation-sensitive high strength materials in vacuum under tensile and compressive load. Int. J. Refract. Met. Hard Mater, 105327 : .
Sonar T.,Ivanov M.,Trofimov E.,Tingaev A.,Suleymanova I. .2023 .A comprehensive review on fusion welding of high entropy alloys - Processing, microstructural evolution and mechanical properties of joints. Int. J. Light. Mater. Manuf., 06(1) : 122-183.
İ. Özen H.,Gedikli M.,Aslan M. .2023 .Experimental and numerical investigation on energy absorbing characteristics of empty and cellular filled composite crash boxes. Eng, 116315 : .
Singh A.,Singh V.,Singh A. P.,Patel D.,Gupta S. K. .2023 .Experiment analysis of A-TIG welding and comparison between TIG, Double-TIG, and A-TIG of Hastelloy C-276. Today Proc., doi: 10, 05 : .
Harhash M.,Kuhtz M.,Richter J.,Hornig A.,Gude M.,Palkowski H. .2021 .Trigger geometry influencing the failure modes in steel/polymer/steel sandwich crashboxes: Experimental and numerical evaluation.. , : .
Compos .2021 .. , 113619 : 10.
Qureshi O. M.,Bertocchi E. .2012 .Crash performance of notch triggers and variable frequency progressive-triggers on patterned box beams during axial impacts. Thin-Walled Struct, 07 : 98-105.
Boria S. .2017 .Crashworthiness optimization of an automotive front bumper. COUPLED Probl, : 835-846.
Rajak D.,Patil P.,Foam Metal .2019 .Modular Hybrid Crash Box Comprising with Helical Compression Spring. , : .
Li Z.,Yu Q.,Zhao X.,Yu M.,Shi P.,Yan C. .2017 .Crashworthiness and lightweight optimization to applied multiple materials and foam-filled front end structure of auto-body. Adv. Mech. Eng, 9(8) : 1-21.
0

Citations

0

Downloads

59

Views