No Detail Found!

Practice of using parts made of the heat-resistant polymer composites in the chemical industry and agricultural engineering

Author(s)
Kabat O. S. Ukrainian State University of Chemical Technology, Gagarin Ave, Dnipro, Ukraine; Dnipro State Agrarian and Economic University, Serhiy Yefremov St, Ukraine
Kobets A. S. Ukrainian State University of Chemical Technology,Gagarin Ave, Dnipro,Ukraine
Derkach О. D. Ukrainian State University of Chemical Technology,Gagarin Ave, Dnipro,Ukraine
Makarenko D. O. Ukrainian State University of Chemical Technology,Gagarin Ave, Dnipro,Ukraine
Hnatko O. M. Dnipro State Agrarian and Economic University,Serhiy Yefremov St,Ukraine
Abstract
The authors of the article developed polymer composites based on aromatic polyamides, fluoropolymers, and phenolic resins, which have higher physical and mechanical properties than such construction materials as bronze and babbitt. These details, also have similar properties to carbon steels, and in terms of tribological properties, they are significantly superior to them. Polymer composite materials (PCM) were obtained by standard technology, as well as by combining (in situ) the initial components of polymer compositions. The effectiveness of the use of parts from the developed PCM in friction and sealing units of machines and mechanisms of the chemical and agricultural industry has been confirmed. These are the details: sealing of the cantilever shaft of the anchor stirrer; sliding bearings of the soil copying mechanism of the John Deere 1780 seeding machines and the damping mechanism of the cultivator's arrow paw; guide bushings of the movable traverse of the hydraulic press for polymer processing; overlays on the sliding guides of the moving table of the grinding machine (O? 143).
Publication Details
Page(s) 40-47
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 19, Issue: 1, Year: 2024

Request the full text from PASTIC

Keywords
friction nodes, friction and wear, polymer composites, coefficient of friction, chemical and agricultural engineering, sliding bearing, physical-mechanical and thermophysical properties
References
Liu F. C.,Wang P. Y.,Li M.,Li L.,Yue Z. F. .2022 .Physical manufacturing: from the multidisciplinary perspective. Multidiscipline Modeling in Materials and Structures, 18(3) : 373.
Basak S.,Baumers M.,Holweg M.,Hague R.,Tuck C. .2022 .Reducing production losses in additive manufacturing using overall equipment effectiveness. Additive Manufacturing, 102904(1) : 102904.
Kabat O.,Sytar V.,Derkach O.,Sukhyy K. .2021 .Polymeric composite materials of tribotechnical purpose with a high level of physical, mechanical and thermal properties. Chemistry and Chemical Technology, 15(4) : .
Kobets A. S.,Derkach O. D. A. S.,Kabat O. S.,Volovyk I. A.,Kovalenko V. L.,Kotok V. A.,Verbitskiy V. V. .2020 .Investigation friction and wear of constructional plastics based on aromatic polyamide. ARPN Journal of Engineering and Applied Sciences, 10 : 1189.
Berry D.,Wohl C. .2018 .Aerospace and marine environments as design spaces for contaminationmitigating polymeric coatings. Chapter from: Advances in Polymer Science, 1 : 43.
Grytsenko O.,Dulebova L.,Spišák E.,Berezhnyy B. .2022 .New Materials Based on PolyvinylpyrrolidoneContaining Copolymers with Ferromagnetic Fillers. , 15(15) : 5183.
Sevostyanova N. V.,Rosenb A. E.,Buznika V. M.,Loginovb O. N.,Usatiyb S. G.,Bolsunovskayaa T. A. .2020 .A copper-fluoroplastic composite material obtained by explosive pressing. Journal of Friction and Wear, 41(1) : 40.
Shelestova V. A.,Grakovich P. N.,Shilko I. S.,Brundukov A. S.,Stratanovich V. A.,Gutsev D. M.,Ivanov L. F. .2021 .Tribotechnical properties of composites based on different grades of fluoroplastic4 and carbon fibers. Friction and Wear, 42(2) : 121.
Dudin V.,Makarenko D.,Derkach O.,Muranov Y. .2021 .Determination of the influence of a filler on the properties of composite materials based on polytetrafluorothylene for tribosystems of mechanisms and machines. Eastern-European Journal of Enterprise Technologies, 238452(112) : 1729-4061.
Adamenko N. A.,Nguen N. Kh.,Fetisov A. V. .2010 .Study of the effect of shock-wave treatment on the structure and properties of phenylone. International Polymer Science and Technology, 37(11) : .
Dašić P.,Burya A.,Kuznetsova O.,Chernov V. .2016 .Sustainable Development through Quality and Innovation in Engineering and Research". , : 503.
Burya A. I.,Naberezhnaya O. A. .2016 .Friction and wear of organoplastics based on aromatic polyamide of phenylone type. J. Frict. Wear, 37 : 259.
Kabat O.,Makarenko D.,Derkach O.,Ye Muranov .2021 .Determining the influence of the filler on the properties of structural thermal-resistant polymeric materials based on phenylone C1. Eastern-European Journal of Enterprise Technologies, 243100 : 1729-4061.
Kabat O.,Sytar V.,Heti K.,Artemchuk V. .2021 .A method for obtaining a polymer composite based on aromatic polyamide and silicon dioxide. Journal of Chemical Technology and Metallurgy, 56(2) : 19-243p283.
Kabat O.,Kharchenko B.,Derkach O.,Artemchuk V.,Babenko V. .2019 .Polymer composites based on fluoroplastic and method for the production thereof. Voprosy Khimii i Khimicheskoi Tekhnologii, 3 : 116.
Kabat O. S.,Sytar V. I.,Sukhyi K. M. .2017 .Vyznachennia optymalnykh tekhnolohichnykh parametriv pry pererobtsi pres-poroshkiv aromatychnykh poliamidiv u vyroby. Polimernyi zhurnal, 39(4) : 248.
Kabat O. S.,Dusheiko M. V. .2017 .Polimerni kompozytsiini materialy spetsialnoho pryznachennia na osnovi ftoroplastu. Tehnologicheskie sistemy, 4(81) : 63.
.2023 .. (date of application:12.02, : .
.2023 .. , 12 : 02.
.2023 .. , 12 : 02.
html .2023 .. , 12 : 02.
0

Citations

0

Downloads

43

Views