No Detail Found!

Simulation of strong variations of welding current against increased tensile strength of bolt and weld joints

Author(s)
Saripuddin M. Mechanical Engineering Study Program,Universitas Islam Makassar,Indonesia
Ahmad Syarief Civil Engineering Study Program,Universitas Halu Oleo Kendari,Indonesia
Ahmad Hanafie Industrial Engineering Study Program,Universitas Islam Makassar,Indonesia
Suradi Industrial Engineering Study Program,Universitas Islam Makassar,Indonesia
Abstract
This study aims to analyze the simulation of welded current variations (100, 120, 140, and 160) Amperes at the combined combination of longitudinal, transverse, and combination (longitudinal-transverse) welds combined with the position of 4 square model bolts against an increase in plate tensile strength. The tensile testing process of welded and bolted combination joint specimens results in a ratio of tensile strength, loading, and elongation when the condition is proportional until the test specimen breaks. The results of tensile testing show that the simulation of variations in weld current given to the joint affects changes in loading, elongation, and tensile strength ratio. The position of the weld current of 140 Amperes at the combined welded direction (longitudinal-transverse) joint of the combination of 4 bolts of the square model has a maximum tensile strength of 347.222 MPa and a maximum strain of 58.758 % within 25.176 seconds. Results the combination join model is the best combination join of tensile test results. This research is expected to provide new insights into the use of current types and welding directions in welded and bolted combination connection systems in industries engaged in connection construction.
Publication Details
Page(s) 2549-2557
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 23, Year: 2023

Request the full text from PASTIC

Keywords
Simulation, Tensile Strength, welding current strong, weld-bolt combination joints
References
Lan T. .2019 .Analysis of Ultimate Load-Carrying Capacity of Combined Connection with Bolts and Welds. , 25(6) : 426-433.
Chang H. Y.,Yeh C. Y. .2019 .A study on the behavior of steel joints that combine high-strength bolts and fillet welds. Steel Compos, 31(4) : 361-372.
Kim D. K.,Lee C. H. .2020 .Experimental and analytical study of combined bolted-welded lap joints including high-strength steel. J. Constr. Steel Res., 105995 : .
Bartsch H.,Hoffmeister B.,Feldmann M. .2020 .Fatigue analysis of welds and bolts in end plate connections of I-girders. Int. J. Fatigue, 105674 : .
Deng E. F.,Zong L.,Ding Y.,Dai X. M.,Lou N.,Chen Y. .2018 .Monotonic and cyclic response of bolted connections with welded cover plate for modular steel construction. Eng, 04 : 407-419.
Özkılıç Y. O. .2021 .The capacities of unstiffened Tstubs with thin plates and large bolts. doi: 10, 106908 : .
Nguyen-Hoang M.,Becker W. .2020 .Tension failure analysis for bolted joints using a closed-form stress solution. Compos, 111931 : .
Chen Z.,Wang J.,Liu J.,Cong Z. .2020 .Tensile and shear performance of rotary inter-module connection for modular steel buildings. J. Constr. Steel Res., 106367 : .
Bu Y.,Wang Y.,Zhao Y. .2019 .Study of stainless steel bolted extended end-plate joints under seismic loading. Thin-Walled Struct. , 106255 : .
Wang G.,Ding Y. .2020 .The effects of uniform temperature and bolts fracture on the behaviour of high strength bolted frictional steel connection in Dashegnguan Railway Bridge. J. Eng. Res., 8(1) : 6500-127.
Yang L.,Wang M.,Sun Y.,Li Z.,Li Y. .2020 .Experimental and numerical study of LY315 steel moment connection with bolted cover plates. ThinWalled Struct, 107277 : .
Zhang Y.,Gao S.,Guo L.,Fu F.,Wang S. .2021 .Ultimate tensile behavior of bolted stiffened T-stub connections in progressive collapse resistance. J. Constr. Steel Res., 107111 : .
Xu G.,Wang Y.,Du Y.,Zhao W.,Wang L. .2020 .Static strength of friction-type high-strength bolted Tstub connections under shear and compression. Appl. Sci., 10(10) : .
Ghorbel R.,Ktari A.,Haddar N. .2021 .Experimental analysis of temperature field and distortions in multi-pass welding of stainless cladded steel. Int. J. Adv. Manuf. Technol., 113 : 3525-3542.
Elfallah S. S. S. .2022 .Study on the influence of groove shape on the tensile strength of commercial steel. J. Eng. Res., : 1-15.
Elfallah S.,Fascicle XII,Weld XII .2022 .Effect of Gtaw on the Tensile Strength and Hardness of Mild Steel. , 08 : 95-100.
Chen C.,Zhou H.,Wang C.,Zhang Y.,Zhang K. .2021 .Laser welding of ultra-high strength steel with different oscillating modes. J. Manuf. Process., 06 : 761-769.
Ho H. C. .2021 .Structural response of high strength S690 welded sections under cyclic loading conditions. J. Constr. Steel Res., 106696 : .
Može P. .2018 .Bearing strength at bolt holes in connections with large end distance and bolt pitch. J. Constr. Steel Res., 04 : 132-144.
Zeynali Y.,Samimi M. J.,Mazroei A.,Marnani J. A.,Rohanimanesh M. S. .2017 .Experimental and numerical study of frictional effects on block shear fracture of steel gusset plates with bolted connections. Thin-Walled Structures, 09 : 8-24.
Shahini M. F.,Sabbagh A. Bagheri,Davidson P.,Mirghaderi R.,Torabian S. .2022 .Experiments on cold-formed steel moment-resisting connections with bolting friction-slip mechanism. J. Constr. Steel Res., 107368 : .
Xue X.,Lin S.,Guo Z.,Zhao Y.,Lin Q.,Chen Y. .2021 .Mechanical behavior of loose high-strength bolted connections with thin sheet steels. Thin-Walled Struct. 168(November, 108281 : .
0

Citations

0

Downloads

25

Views