No Detail Found!

Preparation and characterization of high-density polyethylene with tio2 modified peg 6000 filler as a landfill liner material

Author(s)
Nurdin Bukit Departement of Physics,Universitas Negeri Medan,Indonesia
Karya Sinulingga Departement of Physics,Universitas Negeri Medan,Indonesia
Abd Hakim S Departement of Physics,Universitas Negeri Medan,Indonesia
Sufri Sinaga Departement of Physics,Universitas Negeri Medan,Indonesia
Bunga Fisikanta Bukit Universitas Quality Berastagi,,Indonesia
Abstract
High-density polyethylene is an engineering polymer that is used in bottom liners of landfills. However, to be used in the environment application, it needs to have good mechanical and thermal qualities. Incorporation of inorganic fillers such as titanium dioxide into a polymer aimed at enhancing several features such as mechanical strength, thermal stability, and resistance to surface wear. In this study, HDPE preparation was carried out by adding TiO2 nanoparticles. TiO2 nanoparticles were synthesized using the precursor TiCL4 and then modified with the addition of PEG 6000. Furthermore, the resulting TiO2 was used as a filler in thermoplastic HDPE. Characterization of high-density polyethylene with TiO2 filler as a landfill liner material shows an increase in mechanical and thermal properties. The HDPE sample containing 8%wt filler had the highest tensile strength, measuring at 84.72 Mpa. In contrast, the use of 6wt% filler resulted in the lowest recorded tensile strength, measuring at 56.24 Mpa. The elastic modulus had its highest increase at 8 wt% TiO2, reaching a value of 729.33 MPa. However, the addition of 6 wt% TiO2 resulted in a notable decrease in elastic modulus, with a value of 522.79 MPa. Additionally, it was observed that the highest elongation at break was achieved with a 4% weight filler, resulting in a value of 49.37%. Similar to the reduction observed in the elastic modulus value, the elongation at break exhibited a substantial decrease of 39.22% upon the addition of 6wt% TiO2. DSC scan curves for both the fabricated nanocomposite systems clearly show that they are affected by the nanofiller and its percentage fraction. There was an increase in Tm1 in the composition of 8wt% TiO2, while an increase in Tm2 occurred in 2wt% TiO2. Therefore, HDPE which is given TiO2 filler has the potential to be used as landfill liner material.
Publication Details
Page(s) 2525-2531
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 22, Year: 2023

Request the full text from PASTIC

Keywords
thermal stability, Mechanical properties, nanocomposite, TiCL4
References
Aggarwal S. S. M. S. R. B .2008 .Crystallinity of hdpe pipes by dsc, xrd and ftir spectroscopy-a Forensic comparison. Indian Journal of Criminology and Criminalistics, 29(2) : 141-148.
Golla Akhil P. S.,James B. R.,A. R. B. R. .2019 .. , : .
. .Characterization of high κ HDPE-TiO 2 composites: A first report. Materials Letters, 241 : 128-131.
. .Selfcleaning and antibacterial activities of textiles using nanocomposite oil palm boiler ash (OPBA), TiO2 and chitosan as coating. South African Journal of Chemical Engineering, 41 : 105-110.
Ginting E. M.,Pardede I. S.,Frida E.,Bukit B. F. .2018 .Mechanical properties of composite thermoplastic hdpe / natural rubber and palm oil boiler ash as filler. Journal of Physics: Conference Series, 1120(1) : .
Sinulingga K.,Hakim S. A.,Sirait M.,Bukit B. F. .2023 .Mechanical and Thermal Properties of HDPE Thermoplastic with Oil Palm Boiler Ash Nano Filler. , : 1742.
. .. Journal of Ecological Engineering, 24(9) : 355-363.
-Torres M.,Romero-Fierro D.,Pardo B.,Bucio S.,E. S. .2021 .Interaction between filler and polymeric matrix in nanocomposites: Magnetic approach and applications. , 13(17) : .
Gong Z.,Zhang H.,Wu M.,Liu W.,Feng Y.,J. Y. . .. , : .
012 Das P. P.,Chaudhary V.,Ahmad F.,Manral A. .2021 .Impact of using high-density polyethylene geomembrane layer as landfill intermediate cover on landfill gas extraction. Waste Management, 12(5) : 1059-1064.
. .Effect of nanotoxicity and enhancement in performance of polymer composites using nanofillers: A state-of-the-art review. Polymer Composites, 42(5) : 2152-2170.
Rothon C.,R. C.,D'Amato M.,Pegoretti A. .2012 .Thermomechanical properties of high density polyethylene - Fumed silica nanocomposites: Effect of filler surface area and treatment. Journal of Polymer Research, 19(6) : 1-11.
Eith A. W.,Koerner G. R. .1997 .Assessment of HDPE geomembrane performance in a municipal waste landfill double liner system after eight years of service.. , : .
Geotextiles . .. , 15(4-6) : 277-287.
Bukit N.,Bukit F. R. A.,Bukit B. F. .2022 .. , 1144(97) : 10010-3.
Rahmat F.,Bukit A.,Bukit F. .2022 .Analysis Structure and Morphology of Bentonite-Opba. Journal of Physics: Conference Series, 20(1) : 117-125.
Naik Ghazzy A.,Shakya R. R.,A. K. R. R. .2023 .MetalPolymer Nanocomposites: A Promising Approach to Antibacterial Materials. , 15(9) : 1-30.
Bukit N. .2015 .Synthesis and characterization of alumina precursors derived from aluminum metal through electrochemical method. , : .
. .. Indonesian Journal of Chemistry, 15(2) : 123-129.
Hashimoto M.,Takadama H.,Mizuno M.,Kokubo T. . .. , : .
. .Mechanical properties and apatite forming ability of TiO2 nanoparticles/high density polyethylene composite: Effect of filler content. Journal of Materials Science: Materials in Medicine, 18(4) : 661-668.
Ikpe A. E.,Ndon A. E.,Adoh A. U. .2019 .Modelling and simulation of high density polyethylene liner installation in engineered landfill for optimum performance. Journal of Applied Sciences and Environmental Management, 23(3) : 449.
Rufino E. S.,De Paula F. O. C E. S.,Torres A. C. .2003 .Mechanical, thermal and microstructure evaluation of HDPE after weathering in Rio de Janeiro City. Polymer Degradation and Stability, 79(3) : 371-383.
Mozumder A. H. I.,Mairpady M. S.,Pervez H A.,Kannuri U. M. .2017 .On the injection molding processing parameters of HDPE-TiO2 nanocomposites. , 3910(02) : 00337-3.
Materials . .. , 10(1) : 1-25.
ma10010085 Muralikrishna I. V.,Manickam V. .2017 .. , : .
Management Hazardous Waste Environmental,Na L. K.,Hsuan S.,Spatari Y. G.,S. Y. G. .2020 .Management. - 12-811989-1, : 00017.
.2019 .Uncertainty in the life cycle greenhouse gas emissions and costs of HDPE pipe alternatives. Resources, Conservation and Recycling, 154 : 104602.
Pulungan Nurfajriani,Yusuf A. N.,Tampubolon M.,M. D. M. .2019 .. , : .
and Bukit N. ,Chen D. H.,Kucknoor A. S.,Gomes Z.,A. J. Z. .2014 .Silver-Doped TiO2/Polyurethane Nanocomposites for Antibacterial Textile Coating. Journal of Physics: Conference Series, 1485(1) : 1742.
Oréfice R. L. .2020 .Comparative study of HDPE composites reinforced with microtalc and nanotalcs: high performance filler for improving ductility at low concentration levels. Journal of Materials Research and Technology, 9(6) : 16387-16398.
Petousis M.,Maniadi A.,Papadakis V.,Manousaki A. .2022 .MEX 3D Printed HDPE/TiO2 Nanocomposites Physical and Mechanical Properties Investigation. Journal of Composites Science, 6(7) : .
0

Citations

0

Downloads

36

Views