No Detail Found!

Structure safety and weld strength evaluation by metallic weld joints in fcaw with taguchi design

Author(s)
M. Saravanan Aarupadai Veedu Institute of Technology, Vinayaka Mission's Research Foundation, Deemed to be University,Tamil Nadu,India
G. Mutharasu Aarupadai Veedu Institute of Technology, Vinayaka Mission's Research Foundation, Deemed to be University,Tamil Nadu,India
Sangeetha Krishnamoorthi Aarupadai Veedu Institute of Technology, Vinayaka Mission's Research Foundation, Deemed to be University,Tamil Nadu,India
M. Saravanakumar Aarupadai Veedu Institute of Technology, Vinayaka Mission's Research Foundation, Deemed to be University,Tamil Nadu,India
B. Selvababu Aarupadai Veedu Institute of Technology, Vinayaka Mission's Research Foundation, Deemed to be University,Tamil Nadu,India
Abstract
Several industries, including shipbuilding and automobile manufacturing, extensively use welding as a joining method. Welding processes are always plagued by distortion. Many parameters influence distortion on weld joints, including the properties of materials and welding parameters. To obtain optimal distortion parameters, the Shielded Metal Arc Welding (SMAW) process on angular distortion is used. However, this technique contains slag inclusions and it gives low productivity. To overcome this issue the Flux-Cored Arc Welding (FCAW) technique is used to combine the metals and alloys in a variety of sectors. It offers several advantages over other methods, including simplicity and adaptability over Submerged-arc welding (SAW), higher productivity over SMAW, and superior surface appearance. In this work, during the welding operation, two dissimilar high-carbon steels (EN8 and EN19) are used and the welding quality is checked by utilizing destructive and microstructure tests. To analyze the effects of process parameters on welded joints, mechanical tests like yield strength, tensile strength, and hardness test are performed and optimized using TAGUCHI design (L9 array). The accurate input parameter of EN8 and EN19 steel with a thickness of 6mm is determined. The welding process parameters are optimized by utilizing the MINITAB-17 software. As a result, the FCAW has higher tensile and yield strength than the conventional method of SAW.
Publication Details
Page(s) 2401-2410
DOI DOI not available
Published Journal: ARPN Journal of Engineering and Applied Sciences, Volume: 18, Issue: 21, Year: 2023

Request the full text from PASTIC

Keywords
MINITAB-17 software, destructive and microstructure tests, shielded metal Arc welding and EN19 steel, flux-cored Arc welding EN8, TAGUCHI design (L9 array)
References
Prabhu D.,Jomy J. and Prabhu P. R. .2022 .Influence of Different Heat Treatment Temperatures on the Microstructure and Corrosion Behaviour of DualPhase EN8 Steel in 0.5 M Sulphuric Acid Solution. Journal of Bio-and Tribo-Corrosion, 8(4) : 88.
Burger S.,Zinke M.,Jüttner S. .2021 .The hot cracking tendency of flux-cored arc welding with flux-cored wires of types Ni 6625. , 65 : 381-392.
Arifin A.,Gunawan A. M.,Yani I.,Pratiwi D. K.,Yanis M.,Sani K. A. .2019 .Optimization of Angular Distortion on Weld Joints Using Taguchi Approach. , 31(1) : 19-23.
Payares-Asprino C. .2021 .Prediction of mechanical properties as a function of welding variables in. , : .
Kim J.,Kim J.,Pyo C. .2020 .A study on fiber laser welding of high-manganese steel for cryogenic tanks. Processes, 8(12) : 1536.
Kuryntsev S. .2021 .-Methods and techniques, microstructure and properties. Materials, 15(1) : 122.
Son H. J.,Jeong Y. C.,Seo B. W.,Hong S. T.,Kim Y. C.,Cho Y. T. .2023 .Weld Quality Analysis of High-Hardness Armored Steel in Pulsed Gas Metal Arc Welding. , 13(2) : 303.
Kamal S.,Parthiban V.,Puthilibai G.,Thirumal Azhagan M.,Kamal N.,Senthil T.S.,Yishak S. .2022 .Investigation on tensile behaviour of different weld joints through Taguchi approach. Advances in Materials Science and Engineering., : .
Singh V. P.,Patel S. K.,Ranjan A.,Kuriachen B. .2020 .Recent research progress in solid state frictionstir welding of aluminium-magnesium alloys: a critical review. Journal of Materials Research and Technology, 9(3) : 6217-6256.
Viyay P.,Pannerselvam R.,Srinivasan N. . .An investigation on effect of process parameter on bi-metallic weld joints in fcaw with taguchi design. International Journal of Creative Research Thoughts (IJCRT), 9(3) : 2320-2882.
Li T.,Zhang Y.,Gao L.,Zhang Y. .2018 .Optimization of FCAW parameters for ferrite content in 2205 DSS welds based on the taguchi design method. Advances in Materials Science and Engineering, : 1-7.
Tavares S. S. M.,Pardal J. M.,Noris L. F.,Diniz M. G. .2021 .Microstructural characterization and nondestructive testing and of welded joints of duplex stainless steel in flexible pipes. Journal of Materials Research and Technology. 15, : 3399-3408.
Prabhu D.,Jomy J. and Prabhu P. R. .2022 .Influence of Different Heat Treatment Temperatures on the Microstructure and Corrosion Behaviour of DualPhase EN8 Steel in 0.5 M Sulphuric Acid Solution. Journal of Bio-and Tribo-Corrosion, 8(4) : 88.
Roshan C. C.,Raghul C.,Ram H. V.,Suraj K. P.,Solomon J. .2019 .Non-destructive testing by liquid penetrant testing and ultrasonic testing-A review. Int. J. Adv. Res. Ideas Innov. Technol. 5, : 694-697.
Park M.,Kim J.,Pyo C.,Kim J.,Chun K. .2021 .A Study on the Weldment Hardening Discrimination Procedure and Improvement of Flux Cored Arc Welding Process of ASTM A553-1 (9% Nickel Steel) Material Using Bead Geometry Distribution. , 11(8) : 1282.
Zhao Y.,Cao Y.,Wen W.,Liu Z.,Chen Y.,P. Y. .2023 .Effects of Mn content on austenite stability and mechanical properties of low Ni alumina-forming austenitic heat-resistant steel: a firstprinciples study. Scientific Reports, 13(1) : 5769.
Huang G.,Wu J.,Yuan R.,Yang J.,Cao F.,Midawi A.R.,Guan W.,Hou W.,Lu C.,Gerlich A.,Shen Y. .2022 .Elucidating microstructural evolution and its effect on the mechanical properties of FSWed alumina-forming austenitic steel for power plant applications. Materials & Design. 215, : 110484.
Prabhu P. R.,Hiremath P.,Prabhu D.,Gowrishankar M. C.,Gurumurthy B. M. .2021 .Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 MH 2 SO 4 using pectin as inhibitor. Chemical Papers, 75 : 6083-6099.
Ghosh N.,Pal P. K.,Nandi G.,Rudrapati R. .2018 .Parametric optimization of gas metal arc welding process by PCA based Taguchi method on austenitic stainless steel AISI 316L. Materials Today: Proceedings. 5, (1) : 1620-1625.
Mohammed S.,Alkhaldi Ali A.,Ali Majeed,Khirallah Sobhi .2021 .Impact of the Welding Parameters on the Width of the Welding beat in TIG Carbon Steel Welding. International Journal of Engineering and Advanced Technology (IJEAT), 10(3) : 2249-8958.
0

Citations

0

Downloads

29

Views