No Detail Found!

Impact of Window Design on Dynamic Daylight Performance in an Office Building in Iran

Author(s)
Shiva Farivar Department of Architecture, Mashhad Branch, Islamic Azad University,Mashhad,Iran
Shabnam Teimourtash Department of Architecture, Mashhad Branch, Islamic Azad University,Mashhad,Iran
Abstract
Window design affects the building's appearance. Besides, it has a significant impact on daylight performance and the visual comfort of interior spaces. Therefore, choosing the shape and position of windows can be a challenge for architects. This research aims to investigate the impact of window design on dynamic daylight performance to enhance visual comfort. The research examines five common window shapes that are located in two different positions on the southern-facing side. The most common dynamic daylight metrics of LEED v4.1 were used to investigate the spatial daylight autonomy (sDA), and annual sunlight exposure (ASE). Furthermore, useful daylight illuminance (UDI) was considered a complementary approach to assess useful daylight levels. The metrics are examined in three cities including Mashhad, Isfahan, and Bandar Abbas, which are located in the northeast, center, and south of Iran, respectively. Thirty simulations in each city are conducted by Grasshopper Graphical editor as a parametric interface and its plugins, ladybug, and honeybee for dynamic daylight analysis. The results emphasize that window design has a significant impact on dynamic daylight performance. The square window meets the LEED needs in three cities by achieving maximum sDA and minimum ASE by up to 68.8% and 20% in both positions, respectively. Moreover, the centrally positioned square window presents the lowest ASE level of 14.4% among other cases. However, the windows in a higher position, especially horizontal windows obtain the highest values of sDA, UDI, and ASE by up to 77%, 59%, and 30%, respectively. Therefore, the ASE rates deteriorate by increasing the sill height and head height of windows. This paper can provide window design recommendations based on the comparison of dynamic daylight metrics for five common window shapes.
Publication Details
Page(s) 31-44
Published Journal: Journal of Daylighting, Volume: 10, Issue: 1, Year: 2023

Request the full text from PASTIC

Keywords
Visual Comfort, Window design, LEED, Dynamic daylight performance
References
Galasiu A. D.,Veitch J. A. .2006 .Occupant Preferences and Satisfaction with the Luminous Environment and Control Systems in Daylit Offices: a literature review. Energy and Buildings, 38 : 728-742.
Lim Y. W.,Kandar M. Z.,Ahmad M. H.,Ossen D. R.,Abdullah A. M. .2012 .Building Façade Design for Daylighting Quality in Typical Government Office Building. Building and Environment, 57 : 194-204.
Şener F.,Yilmaz F. .2016 .Proposal of a Façade Design Approach for Daylight Performance Determination in Buildings, A|Z IUT Journal of Faculty of Architecture 13 (. , : 57-64.
Shafavi N. S.,Tahsildoost M.,Zomorodian Z. S. .2020 .Investigation of Illuminance-based Metrics in Predicting Occupants' Visual comfort (Case Study: Architecture Design Studios). Solar Energy, 197 : 111-125.
Acosta I.,Á. Campano M.,Molina J. F. .2016 .Window Design in Architecture: Analysis of Energy Savings for Lighting and Visual Comfort in Residential Spaces. Applied Energy, 168 : 493-506.
Gábrová L. .2016 .Comparison between Dynamic and Static Metrics for Daylight Evaluation in the Case of Obstructed Buildings. Applied Mechanics and Materials, 861 : 477-484.
Ochoa C. E.,M. B. C. Aries E. J. van Loenen,Hensen J. L. M. .2012 .Considerations on Design Optimization Criteria for Windows Providing Low Energy Consumption and High Visual Comfort. Applied Energy, 95 : 238-245.
Alhagla K.,Mansour A.,Elbassuoni R. .2019 .Optimizing Windows for Enhancing Daylighting Performance and Energy Saving. Alexandria Engineering Journal, 58 : 283-290.
.2020 .H. baş, Hybrid-Model Simulations to Equilibrate Energy Demand and Daylight Autonomy as a Function of Window-to-Wall Ratio and Orientation For a Perimeter Office in Izmir. , 15 : 537-552.
Kazanasmaz T.,Grobe L. O.,Bauer C.,Krehel M.,Wittkopf S. .2016 .Three Approaches to Optimize Optical Properties and Size of a South-facing Window for Spatial Daylight Autonomy. Building and Environment, 102 : 243-256.
Chi D. A. .2021 .An Approach to Determine Specific Targets of Daylighting Metrics and Solar Gains for Different Climatic Regions. Journal of Daylighting, 8 : 1-19.
Mangkuto R. A.,Rohmah M.,Asri A. D. .2016 .Design Optimisation for Window Size, Orientation, and Wall Reflectance with Regard to Various Daylight Metrics and Lighting Energy Demand: A Case Study of Buildings in the Tropics. Applied Energy, 164 : 211-219.
.2020 .Seyedzadeh, Multi-objective Optimisation Framework for Designing Office Windows: Quality of View, Daylight and Energy Efficiency. Applied Energy, 261 : 114356.
Sun Y.,Wu Y.,Wilson R. .2017 .Analysis of the Daylight Performance of a Glazing System with Parallel Slat Transparent Insulation Material (PSTIM). Energy and Buildings, 139 : 616-633.
Bahdad A. A. S.,Fadzil S. F. S.,Taib N. .2020 .Optimization of Daylight Performance Based on Controllable Light-shelf Parameters using Genetic Algorithms in the Tropical Climate of Malaysia. Journal of Daylighting, 7 : 122-136.
Freewan A. A. Y.,Al J. A.,Dalala J. A. .2020 .. Alexandria Engineering Journal, 59 : 791-802.
Urbano Gutiérrez R.,Du J.,Ferreira N.,Ferrero A.,Sharples S. .2019 .Daylight Control and Performance in Office Buildings Using a Novel Ceramic Louvre System. Building and Environment, 151 : 54-74.
Khidmat R. P.,Fukuda H.,Paramita B.,Koerniawan M. D. .2022 .Kustiani, The Optimization of Louvers Shading Devices and Room Orientation under Three Different Sky Conditions. Journal of Daylighting, 9 : 137-149.
Özdemir H.,Çakmak B. Y. .2022 .Evaluation of Daylight and Glare Quality of Office Spaces with Flat and Dynamic Shading System Facades in Hot Arid Climate. Journal of Daylighting, 9 : 197-208.
Samali .2021 .Optimum External Shading System for Counterbalancing Glare Probability and Daylight Illuminance in Sydney's Residential Buildings. Construction and Architectural Management, 30 : 296-320.
Samadi S.,Noorzai E.,Beltrán L. O.,Abbasi S. .2020 .A Computational Approach for Achieving Optimum Daylight inside Buildings through [. 23] [25] [27] [29] [31] [33] [35] [37] [39] Automated kinetic shading Systems, Frontiers of Architectural Research, 9 : 335-349.
Palarino and M. B. Piderit C. .2020 .Optimisation of Passive Solar Design Strategies in Side-lit Offices: Maximising Daylight Penetration while Reducing the Risk of Glare in Different Chilean Climate Contexts. Journal of Daylighting, 7 : 107-121.
Liu X.,Sun Y.,Wei S.,Meng L. .2021 .Illumination Distribution and Daylight Glare Evaluation within Different Windows for Comfortable Lighting, Results in Optics 3 (. , : 100080.
Maleki A.,Dehghan N. .2021 .Optimum Characteristics of Windows in an Office Building in Isfahan for Save Energy and Preserve Visual Comfort. Journal of Daylighting, 8 : 222-238.
Acosta I.,Munoz C.,Campano M. A.,Navarro J. .2015 .Analysis of Daylight Factors and Energy Saving allowed by Windows under Overcast Sky Conditions. Renewable Energy, 77 : 194-207.
Kharvari F. .2020 .A Field-validated Multi-objective Optimization of the Shape and Size of Windows Based on Daylighting Metrics in Hot-summer Mediterranean and Dry Summer Continental Climates. Journal of Daylighting, 7 : 222-237.
.2017 .Code 4 of Iran's National Building Regulations (General Building Requirements). Iran, : .
Turan I.,Chegut A.,Fink D.,Reinhart C. .2020 .. The Value of Daylight in Office Spaces, Building and Environment, 168 : 106503.
BSI Standards .2021 .Publication Light and lighting - Lighting of work places. Part, 1 : .
.2022 .-lighting-lighting-ofwork-places-indoor-work-places-2/tracked-changes (accessed Apr. , 29 : .
C. F. Reinhart J.,Mardaljevic Z.,Rogers Z. .2006 .Dynamic Daylight Performance Metrics for Sustainable Building Design. The Journal of the Illuminating Engineering Society, 3 : 7-31.
Method: IES Spatial Daylight Approved .2012 .Autonomy (sDA) and Annual Sunlight Exposure (ASE. , : .
.2022 .. , 10 : .
Zomorodian Z. S.,Korsavi S. S.,Tahsildoost M. .2016 .The Effect of Window Configuration on Daylight Performance in Classrooms: A Field and. International Journal of Architectural Engineering & Urban Planning, 26 : 15-24.
H. M. T. El Daly .2014 .Automated Fenestration Allocation as Complying with LEED Rating System. Alexandria Engineering Journal, 53 : 883-890.
Brembilla E.,Mardaljevic J.,art Methods .2019 .Climate-Based Daylight Modelling for Compliance Verification: Benchmarking Multiple State-of-the-. Building and Environment, 158 : 151-164.
Lin C. H.,Tsay Y. S. .2021 .A Metamodel based on Intermediary Features for Daylight Performance Prediction of Façade Design. Building and Environment, 206 : 108371.
.2021 .. LEED v4.1 Building Design and Construction, : .
.2022 .. , 29 : .
S. M. Hosseini M.,Mohammadi O.,Guerra-Santin O. .2019 .Interactive Kinetic Façade: Improving Visual Comfort based on Dynamic Daylight and Occupant's Positions by 2D and 3D Shape Changes. Building and Environment, 165 : 106396.
Nabil A.,Mardaljevic J. .2006 .A Replacement for Daylight Factors. Energy and Buildings, 38 : 905-913.
IES Lighting Measurements . .IES Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE) | U. , : 83-12.
Building Green .2022 .-approved-method-ies-spatial-daylight-autonomysda-and (accessed Jul. , 10 : .
CEC-PIERDaylighting-Plus- .2022 .METRICS_REPORT_fo r_the_CEC_PIER_Daylighting_Plus_Research_Program/links/5bed9e694 585150b2bb9fcb3/DAYLIGHT-METRICS-REPORT-for-the-. pdf (accessed Sep, 11 : .
0

Citations

1

Downloads

140

Views